[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_7 #48
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sun Sep 20 17:36:01 UTC 2015
See <https://jenkins.debian.net/job/reproducible_builder_armhf_7/48/>
------------------------------------------
[...truncated 1473 lines...]
+Construction de l'arbre des dépendances…
+Lecture des informations d'état…
+fakeroot est déjà la plus récente version disponible.
+0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
I: Copying source file
I: copying [libdata-clone-perl_0.004-1.dsc]
I: copying [./libdata-clone-perl_0.004.orig.tar.gz]
I: copying [./libdata-clone-perl_0.004-1.debian.tar.xz]
I: Extracting source
gpgv: keyblock resource `/tmp/buildd/.gnupg/trustedkeys.gpg': file open error
-gpgv: Signature made Sun May 11 02:56:19 2014 GMT+12 using RSA key ID 8649AA06
+gpgv: Signature made lun 12 mai 2014 04:56:19 GMT-14 using RSA key ID 8649AA06
gpgv: Can't check signature: public key not found
-dpkg-source: warning: failed to verify signature on ./libdata-clone-perl_0.004-1.dsc
-dpkg-source: info: extracting libdata-clone-perl in libdata-clone-perl-0.004
-dpkg-source: info: unpacking libdata-clone-perl_0.004.orig.tar.gz
-dpkg-source: info: unpacking libdata-clone-perl_0.004-1.debian.tar.xz
+dpkg-source: avertissement: impossible de vérifier la signature sur ./libdata-clone-perl_0.004-1.dsc
+dpkg-source: info: extraction de libdata-clone-perl dans libdata-clone-perl-0.004
+dpkg-source: info: extraction de libdata-clone-perl_0.004.orig.tar.gz
+dpkg-source: info: extraction de libdata-clone-perl_0.004-1.debian.tar.xz
I: Building the package
-I: Running cd tmp/buildd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" dpkg-buildpackage -us -uc -b -rfakeroot
-dpkg-buildpackage: source package libdata-clone-perl
-dpkg-buildpackage: source version 0.004-1
-dpkg-buildpackage: source distribution unstable
-dpkg-buildpackage: source changed by gregor herrmann <gregoa at debian.org>
+W: no hooks of type A found -- ignoring
+I: Running cd tmp/buildd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" dpkg-buildpackage -us -uc -b -rfakeroot
+dpkg-buildpackage: paquet source libdata-clone-perl
+dpkg-buildpackage: version source 0.004-1
+dpkg-buildpackage: distribution source unstable
+dpkg-buildpackage: source changé par gregor herrmann <gregoa at debian.org>
dpkg-source --before-build libdata-clone-perl-0.004
-dpkg-buildpackage: host architecture armhf
+dpkg-buildpackage: architecture hôte armhf
fakeroot debian/rules clean
dh clean
dh_testdir
@@ -154,19 +166,19 @@
# for *main::STDOUT
ok 9 - data
ok 10 - data ref
-# for ARRAY(0xcde020)
+# for ARRAY(0x9eacd8)
ok 11 - data
ok 12 - data ref
-# for ARRAY(0xcedb50)
+# for ARRAY(0x9fa808)
ok 13 - data
ok 14 - data ref
-# for ARRAY(0xcedeb0)
+# for ARRAY(0x9fab68)
ok 15 - data
ok 16 - data ref
-# for HASH(0xaf9710)
+# for HASH(0x806048)
ok 17 - data
ok 18 - data ref
-# for HASH(0xc91bd0)
+# for HASH(0x99e898)
ok 19 - data
ok 20 - data ref
ok 21 - ref to self (scalar)
@@ -190,19 +202,19 @@
# for *main::STDOUT
ok 36 - data
ok 37 - data ref
-# for ARRAY(0xcde020)
+# for ARRAY(0x9eacd8)
ok 38 - data
ok 39 - data ref
-# for ARRAY(0xcedac0)
+# for ARRAY(0x99e868)
ok 40 - data
ok 41 - data ref
-# for ARRAY(0xc91ca8)
+# for ARRAY(0x9fa718)
ok 42 - data
ok 43 - data ref
-# for HASH(0xcf6b88)
+# for HASH(0x99ed00)
ok 44 - data
ok 45 - data ref
-# for HASH(0xc91d20)
+# for HASH(0xa039d8)
ok 46 - data
ok 47 - data ref
ok 48 - ref to self (scalar)
@@ -381,18 +393,18 @@
ok 5
ok 6 - clonable
ok 7 - custom clone()
-ok 8 - clone() is reentrant
-ok 9
-ok 10 - tid - 2
-ok 11 - noclonable
+ok 8 - tid - 2
+ok 9 - noclonable
+ok 10 - clone() is reentrant
+ok 11
ok 12
ok 13 - clonable
ok 14
ok 15 - clonable
-ok 16 - custom clone()
-ok 17 - clone() is reentrant
-ok 18
-ok 19 - tid - 4
+ok 16 - tid - 3
+ok 17 - custom clone()
+ok 18 - clone() is reentrant
+ok 19
ok 20 - noclonable
ok 21
ok 22 - clonable
@@ -404,12 +416,12 @@
ok 28
ok 29 - threads->create in clone()
ok 30
-ok 31 - threads->create in clone()
-ok 32 - $thr->join: 1
-ok 33
-ok 34 - $thr->join: 2
-ok 35 - threads->create in clone()
-ok 36 - $thr->join: 4
+ok 31
+ok 32 - threads->create in clone()
+ok 33 - threads->create in clone()
+ok 34 - $thr->join: 1
+ok 35 - $thr->join: 2
+ok 36 - $thr->join: 3
1..36
ok
t/11_leaktrace.t ...
@@ -422,7 +434,7 @@
1..6
ok
All tests successful.
-Files=10, Tests=224, 12 wallclock secs ( 0.44 usr 0.10 sys + 2.73 cusr 0.25 csys = 3.52 CPU)
+Files=10, Tests=224, 3 wallclock secs ( 0.50 usr 0.10 sys + 2.72 cusr 0.29 csys = 3.61 CPU)
Result: PASS
make[1]: Leaving directory '/tmp/buildd/libdata-clone-perl-0.004'
fakeroot debian/rules binary
@@ -456,26 +468,39 @@
dh_shlibdeps
dh_installdeb
dh_gencontrol
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'libdata-clone-perl-dbgsym' in '../libdata-clone-perl-dbgsym_0.004-1_armhf.deb'.
-dpkg-deb: building package 'libdata-clone-perl' in '../libdata-clone-perl_0.004-1_armhf.deb'.
+dpkg-deb : construction du paquet « libdata-clone-perl-dbgsym » dans « ../libdata-clone-perl-dbgsym_0.004-1_armhf.deb ».
+dpkg-deb : construction du paquet « libdata-clone-perl » dans « ../libdata-clone-perl_0.004-1_armhf.deb ».
dpkg-genbuildinfo >../libdata-clone-perl_0.004-1_armhf.buildinfo
dpkg-distaddfile libdata-clone-perl_0.004-1_armhf.buildinfo perl optional
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../libdata-clone-perl_0.004-1_armhf.changes
-dpkg-genchanges: warning: package libdata-clone-perl-dbgsym listed in files list but not in control info
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: avertissement: paquet libdata-clone-perl-dbgsym listé dans le fichier de liste des fichiers mais pas dans le fichier info
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build libdata-clone-perl-0.004
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
+W: no hooks of type B found -- ignoring
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 163: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 163: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 163: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 163: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 163: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: cleaning the build env
-I: removing directory /var/cache/pbuilder/build//10275 and its subdirectories
-I: Current time: Sun Sep 20 05:31:42 GMT+12 2015
-I: pbuilder-time-stamp: 1442770302
+I: removing directory /var/cache/pbuilder/build//15980 and its subdirectories
+I: Current time: Mon Sep 21 07:35:52 GMT-14 2015
+I: pbuilder-time-stamp: 1442770552
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/unstable/armhf/libdata-clone-perl_0.004-1.diff: 74.3% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/unstable/armhf/libdata-clone-perl_0.004-1.diff.gz
b2/build.log: 71.5%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 70.5%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/unstable/armhf/libdata-clone-perl_0.004-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/tmp.sS43ytqrrc/tmp.nlzMy8foUP
+ mv /srv/reproducible-results/tmp.sS43ytqrrc/tmp.nlzMy8foUP /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/libdata-clone-perl_0.004-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/libdata-clone-perl_0.004-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/tmp.sS43ytqrrc
+ local TMPLOG=/srv/reproducible-results/tmp.sS43ytqrrc/tmp.nWN65PlLnR
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/libdata-clone-perl_0.004-1.rbuild.log
+ local TIMEOUT=30m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/tmp.sS43ytqrrc -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/tmp.sS43ytqrrc/dbd-tmp-tvfpiza
++ schroot --directory /srv/reproducible-results/tmp.sS43ytqrrc -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 34'
++ echo diffoscope 34
++ grep '^E: 15binfmt: update-binfmts: unable to open'
+ LOG_RESULT=
+ cleanup_all
+ '[' 0 -eq 1 ']'
+ '[' '' = failure ']'
+ '[' '!' -z '' ']'
+ gzip -9fvn /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/libdata-clone-perl_0.004-1.rbuild.log
/var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/libdata-clone-perl_0.004-1.rbuild.log: 66.4% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/libdata-clone-perl_0.004-1.rbuild.log.gz
+ '[' ng = legacy ']'
+ '[' ng = ng ']'
+ gen_package_html libdata-clone-perl
+ cd /srv/jenkins/bin
+ python3 -c 'import reproducible_html_packages as rep
pkg = rep.Package('\''libdata-clone-perl'\'', no_notes=True)
rep.gen_packages_html([pkg], no_clean=True)'
INFO: Starting at 2015-09-20 17:36:01.830880
INFO: Finished at 2015-09-20 17:36:01.836055, took: 0:00:00.005182
+ cd -
+ cd
+ rm -r /srv/reproducible-results/tmp.sS43ytqrrc
+ false
+ rm -f /tmp/reproducible-lockfile-unstable-armhf-libdata-clone-perl
Sun 20 Sep 17:36:01 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-QGtWOx1t, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list