[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_3 #15262
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Thu Dec 10 00:20:17 UTC 2015
See <https://jenkins.debian.net/job/reproducible_builder_amd64_3/15262/>
------------------------------------------
[...truncated 965 lines...]
+dpkg-buildpackage: source changé par Manoj Srivastava <srivasta at debian.org>
dpkg-source --before-build angband-doc-3.0.3.5
-dpkg-buildpackage: host architecture amd64
+dpkg-buildpackage: architecture hôte amd64
fakeroot debian/rules clean
====== making target CLN-common [new prereqs: ]======
====== making target CLN-indep [new prereqs: CLN-common]======
@@ -101,8 +114,8 @@
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/do-pre-config-arch [new prereqs: do-pre-config-common]======
====== making target debian/stamp/do-pre-config-indep [new prereqs: do-pre-config-common]======
-/usr/bin/make -f debian/rules debian/stamp/pre-config-indep
/usr/bin/make -f debian/rules debian/stamp/pre-config-arch
+/usr/bin/make -f debian/rules debian/stamp/pre-config-indep
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/pre-config-indep [new prereqs: do-pre-config-common]======
@@ -149,10 +162,10 @@
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
====== making target build [new prereqs: do-build-arch do-build-indep]======
fakeroot debian/rules binary
-====== making target debian/stamp/do-post-build-indep [new prereqs: do-build-indep]======
====== making target debian/stamp/do-post-build-arch [new prereqs: do-build-arch]======
-/usr/bin/make -f debian/rules debian/stamp/post-build-indep
+====== making target debian/stamp/do-post-build-indep [new prereqs: do-build-indep]======
/usr/bin/make -f debian/rules debian/stamp/post-build-arch
+/usr/bin/make -f debian/rules debian/stamp/post-build-indep
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/post-build-indep [new prereqs: do-build-indep]======
@@ -171,16 +184,16 @@
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
/usr/bin/make -f debian/rules debian/stamp/pre-inst-arch
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
-====== making target debian/stamp/pre-inst-indep [new prereqs: do-post-build-indep]======
-make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
-====== making target debian/stamp/do-install-indep [new prereqs: do-pre-inst-indep]======
-/usr/bin/make -f debian/rules debian/stamp/dep-install-indep
-make[1]: Entering directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/pre-inst-arch [new prereqs: do-post-build-arch]======
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/do-install-arch [new prereqs: do-pre-inst-arch]======
/usr/bin/make -f debian/rules debian/stamp/dep-install-arch
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
+====== making target debian/stamp/pre-inst-indep [new prereqs: do-post-build-indep]======
+make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
+====== making target debian/stamp/do-install-indep [new prereqs: do-pre-inst-indep]======
+/usr/bin/make -f debian/rules debian/stamp/dep-install-indep
+make[1]: Entering directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/install/angband-doc [new prereqs: ]======
rm -rf /build/angband-doc-3.0.3.5/debian/angband-doc
install -p -d -o root -g root -m 755 /build/angband-doc-3.0.3.5/debian/angband-doc/var/games/angband/info
@@ -196,12 +209,8 @@
infodir=/build/angband-doc-3.0.3.5/debian/angband-doc/usr/share/info mandir=/build/angband-doc-3.0.3.5/debian/angband-doc/usr/share/man
make[2]: Entering directory '/build/angband-doc-3.0.3.5'
test -d /build/angband-doc-3.0.3.5/debian/angband-doc/usr/share/doc/angband-doc || install -p -d -o root -g root -m 755 /build/angband-doc-3.0.3.5/debian/angband-doc/usr/share/doc/angband-doc
-====== making target debian/stamp/dep-install-arch [new prereqs: do-pre-inst-arch]======
test -d /build/angband-doc-3.0.3.5/debian/angband-doc/var/games/angband/info || install -p -d -o root -g root -m 755 /build/angband-doc-3.0.3.5/debian/angband-doc/var/games/angband/info
(cd Help-Info; tar cf - *) | (cd /build/angband-doc-3.0.3.5/debian/angband-doc/var/games/angband/info; umask 000; tar xpf -)
-make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
-====== making target debian/stamp/do-pre-bin-arch [new prereqs: do-install-arch]======
-make[1]: Entering directory '/build/angband-doc-3.0.3.5'
find /build/angband-doc-3.0.3.5/debian/angband-doc/var/games/angband/info -type d -name .arch-ids -print0 | xargs -0r rm -rf
(cd Help-Page; tar cf - *) | (cd /build/angband-doc-3.0.3.5/debian/angband-doc/usr/share/doc/angband-doc; umask 000; tar xpf -)
find /build/angband-doc-3.0.3.5/debian/angband-doc/usr/share/doc/angband-doc -type d -name .arch-ids -print0 | xargs -0r rm -rf
@@ -218,38 +227,42 @@
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/do-pre-bin-indep [new prereqs: do-install-indep]======
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
-====== making target debian/stamp/pre-bin-common [new prereqs: ]======
+====== making target debian/stamp/dep-install-arch [new prereqs: do-pre-inst-arch]======
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
-/usr/bin/make -f debian/rules debian/stamp/pre-bin-arch
+====== making target debian/stamp/do-pre-bin-arch [new prereqs: do-install-arch]======
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
-make[1]: 'debian/stamp/pre-bin-common' is up to date.
+====== making target debian/stamp/pre-bin-common [new prereqs: ]======
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
/usr/bin/make -f debian/rules debian/stamp/pre-bin-indep
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
-====== making target debian/stamp/pre-bin-arch [new prereqs: do-install-arch]======
+make[1]: 'debian/stamp/pre-bin-common' is up to date.
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
-====== making target debian/stamp/do-binary-arch [new prereqs: do-pre-bin-arch]======
-/usr/bin/make -f debian/rules debian/stamp/dep-binary-arch
+/usr/bin/make -f debian/rules debian/stamp/pre-bin-arch
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/pre-bin-indep [new prereqs: do-install-indep]======
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/do-binary-indep [new prereqs: do-pre-bin-indep]======
/usr/bin/make -f debian/rules debian/stamp/dep-binary-indep
make[1]: Entering directory '/build/angband-doc-3.0.3.5'
-====== making target debian/stamp/dep-binary-arch [new prereqs: pre-bin-arch]======
+====== making target debian/stamp/pre-bin-arch [new prereqs: do-install-arch]======
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
+====== making target debian/stamp/do-binary-arch [new prereqs: do-pre-bin-arch]======
+/usr/bin/make -f debian/rules debian/stamp/dep-binary-arch
+make[1]: Entering directory '/build/angband-doc-3.0.3.5'
====== making target debian/stamp/binary/angband-doc [new prereqs: ]======
install -p -d -o root -g root -m 755 /build/angband-doc-3.0.3.5/debian/angband-doc/DEBIAN
install -p -o root -g root -m 755 debian/postinst /build/angband-doc-3.0.3.5/debian/angband-doc/DEBIAN/postinst
install -p -o root -g root -m 755 debian/prerm /build/angband-doc-3.0.3.5/debian/angband-doc/DEBIAN/prerm
dpkg-gencontrol -pangband-doc -isp -P/build/angband-doc-3.0.3.5/debian/angband-doc
-dpkg-gencontrol: warning: -isp is deprecated; it is without effect
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+====== making target debian/stamp/dep-binary-arch [new prereqs: pre-bin-arch]======
+make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
+dpkg-gencontrol: avertissement: -isp est obsolète ; ce paramètre est sans effet
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
create_md5sums_fn () { cd $1 ; find . -type f ! -regex './DEBIAN/.*' ! -regex './etc/.*' -printf '%P\0' | xargs -r0 md5sum > DEBIAN/md5sums ; if [ -z "DEBIAN/md5sums" ] ; then rm -f "DEBIAN/md5sums" ; fi ; } ; create_md5sums_fn /build/angband-doc-3.0.3.5/debian/angband-doc
chown -R root /build/angband-doc-3.0.3.5/debian/angband-doc
chmod -R u+w,go=rX /build/angband-doc-3.0.3.5/debian/angband-doc
dpkg --build /build/angband-doc-3.0.3.5/debian/angband-doc ..
-dpkg-deb: building package 'angband-doc' in '../angband-doc_3.0.3.5_all.deb'.
+dpkg-deb : construction du paquet « angband-doc » dans « ../angband-doc_3.0.3.5_all.deb ».
====== making target debian/stamp/BIN/angband-doc [new prereqs: do-pre-bin-indep angband-doc]======
====== making target debian/stamp/dep-binary-indep [new prereqs: pre-bin-indep angband-doc]======
make[1]: Leaving directory '/build/angband-doc-3.0.3.5'
@@ -258,17 +271,66 @@
indep packages = angband-doc
dpkg-genbuildinfo >../angband-doc_3.0.3.5_amd64.buildinfo
dpkg-distaddfile angband-doc_3.0.3.5_amd64.buildinfo doc optional
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../angband-doc_3.0.3.5_amd64.changes
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build angband-doc-3.0.3.5
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
+I: user script /srv/workspace/pbuilder/24431/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/24431/tmp/hooks/B01_cleanup finished
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 164: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/58388 and its subdirectories
-I: Current time: Wed Dec 9 12:19:50 GMT+12 2015
-I: pbuilder-time-stamp: 1449706790
+I: removing directory /srv/workspace/pbuilder/24431 and its subdirectories
+I: Current time: Wed Feb 14 03:06:07 GMT-14 2018
+I: pbuilder-time-stamp: 1518527167
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/angband-doc_3.0.3.5.diff: 79.5% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/angband-doc_3.0.3.5.diff.gz
b2/build.log: 83.0%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 83.2%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/testing/amd64/angband-doc_3.0.3.5.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/tmp.htIbBg5cUH/tmp.sedH535n7z
+ mv /srv/reproducible-results/tmp.htIbBg5cUH/tmp.sedH535n7z /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/angband-doc_3.0.3.5.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/angband-doc_3.0.3.5.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/tmp.htIbBg5cUH
+ local TMPLOG=/srv/reproducible-results/tmp.htIbBg5cUH/tmp.UD8stFdPr8
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/angband-doc_3.0.3.5.rbuild.log
+ local TIMEOUT=30m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/tmp.htIbBg5cUH -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/tmp.htIbBg5cUH/dbd-tmp-unHC89G
++ schroot --directory /srv/reproducible-results/tmp.htIbBg5cUH -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 42'
++ echo diffoscope 42
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/angband-doc_3.0.3.5.rbuild.log
++ date -u
+ echo 'Thu Dec 10 00:20:10 UTC 2015 - diffoscope 42 will be used to compare the two builds:'
Thu Dec 10 00:20:10 UTC 2015 - diffoscope 42 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 30m schroot --directory /srv/reproducible-results/tmp.htIbBg5cUH -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/tmp.htIbBg5cUH/dbd-tmp-unHC89G ; diffoscope --html /srv/reproducible-results/tmp.htIbBg5cUH/angband-doc_3.0.3.5.diffoscope.html --text /srv/reproducible-results/tmp.htIbBg5cUH/angband-doc_3.0.3.5.diffoscope.txt /srv/reproducible-results/tmp.htIbBg5cUH/b1/angband-doc_3.0.3.5_amd64.changes /srv/reproducible-results/tmp.htIbBg5cUH/b2/angband-doc_3.0.3.5_amd64.changes'
+ RESULT=1
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/tmp.htIbBg5cUH/tmp.UD8stFdPr8
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
Thu Dec 10 00:20:16 UTC 2015 - angband-doc failed to build reproducibly in testing on amd64.
Error: near "unreproducible": syntax error
Error: near "unreproducible": syntax error
/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/angband-doc_3.0.3.5.rbuild.log: 79.2% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/angband-doc_3.0.3.5.rbuild.log.gz
INFO: Starting at 2015-12-10 00:20:17.188450
INFO: Finished at 2015-12-10 00:20:17.194003, took: 0:00:00.005558
Thu 10 Dec 00:20:17 UTC 2015 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-YZJOH8xV, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list