[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_26 #707
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sun Jan 24 03:43:25 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_armhf_26/707/>
------------------------------------------
[...truncated 3623 lines...]
+make[3]: rien à faire pour « install-exec-am ».
+make[3]: rien à faire pour « install-data-am ».
+make[3] : on quitte le répertoire « /build/blcr-0.8.5/build/util »
+make[2] : on quitte le répertoire « /build/blcr-0.8.5/build/util »
+make[1] : on quitte le répertoire « /build/blcr-0.8.5/build/util »
DESTDIR=/build/blcr-0.8.5/debian/libcr-dev make -C build/include install
-make[1]: Entering directory '/build/blcr-0.8.5/build/include'
+make[1] : on entre dans le répertoire « /build/blcr-0.8.5/build/include »
if test -d ../libcr32/include; then /usr/bin/make -C ../libcr32/include all; fi
-make[2]: Entering directory '/build/blcr-0.8.5/build/include'
-make[2]: Nothing to be done for 'install-exec-am'.
+make[2] : on entre dans le répertoire « /build/blcr-0.8.5/build/include »
+make[2]: rien à faire pour « install-exec-am ».
/bin/mkdir -p '/build/blcr-0.8.5/debian/libcr-dev/usr/include'
/usr/bin/install -c -m 644 ../../include/blcr_ioctl.h ../../include/blcr_proc.h ../../include/blcr_errcodes.h ../../include/libcr.h '/build/blcr-0.8.5/debian/libcr-dev/usr/include'
/bin/mkdir -p '/build/blcr-0.8.5/debian/libcr-dev/usr/include'
/usr/bin/install -c -m 644 blcr_common.h '/build/blcr-0.8.5/debian/libcr-dev/usr/include'
-make[2]: Leaving directory '/build/blcr-0.8.5/build/include'
-make[1]: Leaving directory '/build/blcr-0.8.5/build/include'
+make[2] : on quitte le répertoire « /build/blcr-0.8.5/build/include »
+make[1] : on quitte le répertoire « /build/blcr-0.8.5/build/include »
DESTDIR=/build/blcr-0.8.5/debian/libcr0 make -C build/libcr install
-make[1]: Entering directory '/build/blcr-0.8.5/build/libcr'
+make[1] : on entre dans le répertoire « /build/blcr-0.8.5/build/libcr »
if test -d ../libcr32/libcr; then /usr/bin/make -C ../libcr32/libcr all; fi
-make[2]: Entering directory '/build/blcr-0.8.5/build/libcr'
+make[2] : on entre dans le répertoire « /build/blcr-0.8.5/build/libcr »
/bin/mkdir -p '/build/blcr-0.8.5/debian/libcr0/usr/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libcr.la libcr_run.la libcr_omit.la '/build/blcr-0.8.5/debian/libcr0/usr/lib'
libtool: install: /usr/bin/install -c .libs/libcr.so.0.5.5 /build/blcr-0.8.5/debian/libcr0/usr/lib/libcr.so.0.5.5
@@ -935,16 +963,16 @@
libtool: install: (cd /build/blcr-0.8.5/debian/libcr0/usr/lib && { ln -s -f libcr_omit.so.0.5.5 libcr_omit.so || { rm -f libcr_omit.so && ln -s libcr_omit.so.0.5.5 libcr_omit.so; }; })
libtool: install: /usr/bin/install -c .libs/libcr_omit.lai /build/blcr-0.8.5/debian/libcr0/usr/lib/libcr_omit.la
libtool: install: warning: remember to run `libtool --finish /usr/lib'
-make[2]: Nothing to be done for 'install-data-am'.
-make[2]: Leaving directory '/build/blcr-0.8.5/build/libcr'
-make[1]: Leaving directory '/build/blcr-0.8.5/build/libcr'
+make[2]: rien à faire pour « install-data-am ».
+make[2] : on quitte le répertoire « /build/blcr-0.8.5/build/libcr »
+make[1] : on quitte le répertoire « /build/blcr-0.8.5/build/libcr »
#DESTDIR=/build/blcr-0.8.5/debian/libcr-dbg make -C build/libcr install
DESTDIR=/build/blcr-0.8.5/debian/blcr-testsuite make -C build/tests install
-make[1]: Entering directory '/build/blcr-0.8.5/build/tests'
+make[1] : on entre dans le répertoire « /build/blcr-0.8.5/build/tests »
if test -d ../libcr32/libcr; then /usr/bin/make -C ../libcr32/libcr all; fi
if test -d ../libcr32/libcr; then /usr/bin/make -C ../libcr32/libcr all; fi
if test -d ../libcr32/libcr; then /usr/bin/make -C ../libcr32/libcr all; fi
-make[2]: Entering directory '/build/blcr-0.8.5/build/tests'
+make[2] : on entre dans le répertoire « /build/blcr-0.8.5/build/tests »
if test -d ../libcr32/libcr; then /usr/bin/make -C ../libcr32/libcr all; fi
if test -d ../libcr32/libcr; then /usr/bin/make -C ../libcr32/libcr all; fi
if test -d ../libcr32/libcr; then /usr/bin/make -C ../libcr32/libcr all; fi
@@ -1048,9 +1076,9 @@
libtool: install: /usr/bin/install -c .libs/crut_wrapper /build/blcr-0.8.5/debian/blcr-testsuite/usr/lib/blcr-testsuite/crut_wrapper
/bin/mkdir -p '/build/blcr-0.8.5/debian/blcr-testsuite/usr/lib/blcr-testsuite'
/usr/bin/install -c cr_run cr_targ cr_targ2 cr_omit dlopen bug2003 run_on save_exe save_priv save_share save_all reloc_exe reloc_file reloc_fifo reloc_dir reloc_all clobber '/build/blcr-0.8.5/debian/blcr-testsuite/usr/lib/blcr-testsuite'
-make[2]: Nothing to be done for 'install-data-am'.
-make[2]: Leaving directory '/build/blcr-0.8.5/build/tests'
-make[1]: Leaving directory '/build/blcr-0.8.5/build/tests'
+make[2]: rien à faire pour « install-data-am ».
+make[2] : on quitte le répertoire « /build/blcr-0.8.5/build/tests »
+make[1] : on quitte le répertoire « /build/blcr-0.8.5/build/tests »
mv /build/blcr-0.8.5/debian/libcr0/usr/lib/*.la /build/blcr-0.8.5/debian/libcr-dev/usr/lib/
mv /build/blcr-0.8.5/debian/libcr0/usr/lib/*.so /build/blcr-0.8.5/debian/libcr-dev/usr/lib/
# fix the libdir in the -dev package too
@@ -1097,8 +1125,8 @@
elf_open: Exec format error
`/build/blcr-0.8.5/debian/blcr-testsuite/usr/lib/blcr-testsuite/shellinit' probably isn't an ELF file.
elf_open: Exec format error
-debian/rules:116: recipe for target 'install' failed
-make: [install] Error 1 (ignored)
+debian/rules:116 : la recette pour la cible « install » a échouée
+make: [install] Erreur 1 (ignorée)
# This is a midly convoluted way of making a tarball!
cd debian/blcr-source/usr/src/modules/blcr && ln -s /build/blcr-0.8.5/* .
rm debian/blcr-source/usr/src/modules/blcr/debian
@@ -1146,34 +1174,84 @@
dh_installdeb -s
dh_shlibdeps -s
dh_gencontrol -s
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: Depends field of package libcr-dbg: unknown substitution variable ${shlibs:Depends}
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: Depends field of package libcr-dev: unknown substitution variable ${shlibs:Depends}
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: champ Depends du paquet libcr-dbg : variable de substitution inconnue ${shlibs:Depends}
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: champ Depends du paquet libcr-dev : variable de substitution inconnue ${shlibs:Depends}
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dh_md5sums -s
dh_builddeb -s
-dpkg-deb: building package 'blcr-testsuite' in '../blcr-testsuite_0.8.5-2.2_armhf.deb'.
-dpkg-deb: building package 'blcr-util' in '../blcr-util_0.8.5-2.2_armhf.deb'.
-dpkg-deb: building package 'libcr-dbg' in '../libcr-dbg_0.8.5-2.2_armhf.deb'.
-dpkg-deb: building package 'libcr0' in '../libcr0_0.8.5-2.2_armhf.deb'.
-dpkg-deb: building package 'libcr-dev' in '../libcr-dev_0.8.5-2.2_armhf.deb'.
+dpkg-deb : construction du paquet « libcr0 » dans « ../libcr0_0.8.5-2.2_armhf.deb ».
+dpkg-deb : construction du paquet « blcr-util » dans « ../blcr-util_0.8.5-2.2_armhf.deb ».
+dpkg-deb : construction du paquet « blcr-testsuite » dans « ../blcr-testsuite_0.8.5-2.2_armhf.deb ».
+dpkg-deb : construction du paquet « libcr-dbg » dans « ../libcr-dbg_0.8.5-2.2_armhf.deb ».
+dpkg-deb : construction du paquet « libcr-dev » dans « ../libcr-dev_0.8.5-2.2_armhf.deb ».
dpkg-genbuildinfo >../blcr_0.8.5-2.2_armhf.buildinfo
dpkg-distaddfile blcr_0.8.5-2.2_armhf.buildinfo misc optional
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../blcr_0.8.5-2.2_armhf.changes
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build blcr-0.8.5
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/26197/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/26197/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/3254 and its subdirectories
-I: Current time: Sat Jan 23 15:19:07 GMT+12 2016
-I: pbuilder-time-stamp: 1453605547
+I: removing directory /srv/workspace/pbuilder/26197 and its subdirectories
+I: Current time: Sun Jan 24 17:26:51 GMT-14 2016
+I: pbuilder-time-stamp: 1453606011
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/unstable/armhf/blcr_0.8.5-2.2.diff: 83.3% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/unstable/armhf/blcr_0.8.5-2.2.diff.gz
b2/build.log: 86.3%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 86.4%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/unstable/armhf/blcr_0.8.5-2.2.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-XP8lB4GM/tmp.8gxS3IZw3V
+ mv /srv/reproducible-results/rbuild-debian-XP8lB4GM/tmp.8gxS3IZw3V /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/blcr_0.8.5-2.2.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/blcr_0.8.5-2.2.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-XP8lB4GM
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-XP8lB4GM/tmp.htoDaOSHXc
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/blcr_0.8.5-2.2.rbuild.log
+ local TIMEOUT=30m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-XP8lB4GM -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-XP8lB4GM/dbd-tmp-8IrAiRY
++ schroot --directory /srv/reproducible-results/rbuild-debian-XP8lB4GM -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 47'
++ echo diffoscope 47
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/blcr_0.8.5-2.2.rbuild.log
++ date -u
+ echo 'Sun Jan 24 03:27:10 UTC 2016 - diffoscope 47 will be used to compare the two builds:'
Sun Jan 24 03:27:10 UTC 2016 - diffoscope 47 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 30m nice schroot --directory /srv/reproducible-results/rbuild-debian-XP8lB4GM -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-XP8lB4GM/dbd-tmp-8IrAiRY ; diffoscope --html /srv/reproducible-results/rbuild-debian-XP8lB4GM/blcr_0.8.5-2.2.diffoscope.html --text /srv/reproducible-results/rbuild-debian-XP8lB4GM/blcr_0.8.5-2.2.diffoscope.txt /srv/reproducible-results/rbuild-debian-XP8lB4GM/b1/blcr_0.8.5-2.2_armhf.changes /srv/reproducible-results/rbuild-debian-XP8lB4GM/b2/blcr_0.8.5-2.2_armhf.changes'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-XP8lB4GM/tmp.htoDaOSHXc
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _
| |__ | | ___ _ __
| '_ \| |/ __| '__|
| |_) | | (__| |
|_.__/|_|\___|_|
diffoscope 47 found no differences in the changes files, and a .buildinfo file also exists.
blcr from unstable built successfully and reproducibly on armhf.
INFO: Starting at 2016-01-24 03:27:12.161816
INFO: Finished at 2016-01-24 03:27:12.172111, took: 0:00:00.010304
Sun Jan 24 03:27:12 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/rb-pkg/unstable/armhf/blcr.html
Sun Jan 24 03:27:12 UTC 2016 - total duration: 0h 21m 33s.
/var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/blcr_0.8.5-2.2.rbuild.log: 84.2% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/unstable/armhf/blcr_0.8.5-2.2.rbuild.log.gz
INFO: Starting at 2016-01-24 03:27:12.365756
INFO: Finished at 2016-01-24 03:27:12.377067, took: 0:00:00.011321
Sun 24 Jan 03:27:12 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-zlHNvAjE, which will now be removed.
FATAL: GC overhead limit exceeded
java.lang.OutOfMemoryError: GC overhead limit exceeded
More information about the Qa-jenkins-scm
mailing list