[Qa-jenkins-scm] [jenkins.debian.net] 01/01: reproducible debian: add 16th armhf build node, thanks vagrant
Holger Levsen
holger at moszumanska.debian.org
Thu Feb 11 17:49:08 UTC 2016
This is an automated email from the git hooks/post-receive script.
holger pushed a commit to branch master
in repository jenkins.debian.net.
commit 3f3d1975b3b21f29c29edc66cb35dc947d5960fe
Author: Holger Levsen <holger at layer-acht.org>
Date: Thu Feb 11 18:48:58 2016 +0100
reproducible debian: add 16th armhf build node, thanks vagrant
---
README | 2 +-
THANKS.head | 5 +-
bin/jenkins_node_definitions.sh | 5 +-
hosts/cbxi4b | 1 +
hosts/cbxi4b-armhf-rb/etc/apt/apt.conf.d/80proxy | 2 +
hosts/cbxi4b-armhf-rb/etc/apt/listchanges.conf | 6 +
hosts/cbxi4b-armhf-rb/etc/apt/sources.list | 11 +
hosts/cbxi4b-armhf-rb/etc/cron.d/dsa | 10 +
hosts/cbxi4b-armhf-rb/etc/munin/munin-node.conf | 66 ++++
hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/df | 6 +
.../etc/munin/plugin-conf.d/diskstats | 4 +
.../etc/munin/plugin-conf.d/munin-node | 117 +++++++
.../etc/munin/plugins/jenkins_reproducible_builds | 56 ++++
.../etc/pbuilder/rebuild-hooks/B01_cleanup | 17 +
.../etc/pbuilder/rebuild-hooks/C01_cleanup | 21 ++
.../pbuilder/rebuild-hooks/D01_modify_environment | 30 ++
hosts/cbxi4b-armhf-rb/etc/pbuilderrc | 31 ++
hosts/cbxi4b-armhf-rb/etc/postfix/main.cf | 41 +++
hosts/cbxi4b-armhf-rb/etc/rc.local | 16 +
hosts/cbxi4b-armhf-rb/etc/schroot/default/fstab | 24 ++
.../etc/schroot/default/nssdatabases | 11 +
hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins | 53 +++
hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins-adm | 7 +
.../usr/local/bin/dsa-check-packages | 362 +++++++++++++++++++++
.../usr/local/bin/dsa-check-running-kernel | 252 ++++++++++++++
.../usr/local/sbin/nagios-check-libs | 204 ++++++++++++
hosts/jenkins/etc/munin/munin.conf | 12 +-
job-cfg/reproducible.yaml | 7 +-
28 files changed, 1373 insertions(+), 6 deletions(-)
diff --git a/README b/README
index 8fa7b3e..9d5f8b8 100644
--- a/README
+++ b/README
@@ -140,7 +140,7 @@ Installation tests inside chroot environments.
* Currently, three suites are tested on 'amd64' and 'armhf' architectures: 'testing', 'unstable' and 'experimental'. The tests are done using 'pbuilder' using link:https://wiki.debian.org/ReproducibleBuilds/ExperimentalToolchain[our toolchain] through concurrent builder jobs, 32 for 'amd64' and 38 for 'armhf', which are each constantly testing packages and saving the results of these tests.
** These builds on remote nodes run on very different hardware: for 'amd64' we are now using four virtual machines, profitbricks-build(1+2+5+6)-amd64, which have 18 or 17 cores and 48gb ram each and are sponsored by link:https://jenkins.debian.net/userContent/thanks.html[Profitbricks].
-** To test 'armhf' we are using 15 small boards donated by vagrant at d.o: ten quad cores (wbq0, cbxi4a, cbxi4pro0, ff2a, ff2b odxu4, odxu4b, odxu4c, opi2a and opi2b) with 2gb ram, two quad-cores (rpi2b and rpi2c) with 1gb ram and three dual cores (bpi0, hb0 and wbd0) with 1gb ram, each. We would love to have more or more powerful ARM hardware in the future, if you can help, please talk to us!
+** To test 'armhf' we are using 16 small boards donated by vagrant at d.o: eleven quad cores (cbxi4a and cbxi4b) with 4gb ram, nine quad cores (wbq0, cbxi4pro0, ff2a, ff2b odxu4, odxu4b, odxu4c, opi2a and opi2b) with 2gb ram, two quad-cores (rpi2b and rpi2c) with 1gb ram and three dual cores (bpi0, hb0 and wbd0) with 1gb ram, each. We would love to have more or more powerful ARM hardware in the future, if you can help, please talk to us!
* Packages to be build are scheduled in the SQLite database via a scheduler job, which runs every hour and if the queue is below a certain threshold schedules four types of packages:
** new untested packages (either uploaded to 'unstable' or 'experimental' or migrated to 'testing'),
diff --git a/THANKS.head b/THANKS.head
index 82eee49..bb60f3b 100644
--- a/THANKS.head
+++ b/THANKS.head
@@ -11,8 +11,9 @@
** 17 cores and 48 GB memory for profitbricks-build5-amd64.debian.net
** 17 cores and 48 GB memory for profitbricks-build6-amd64.debian.net
** 3 cores and 6 GB memory for freebsd-jenkins.debian.net (also running on Profitbricks virtual hardware)
- * link:https://qa.debian.org/developer.php?login=vagrant%40debian.org[Vagrant] provides and hosts 15 'armhf' systems:
- ** ten quad-cores with 2 GB RAM each,
+ * link:https://qa.debian.org/developer.php?login=vagrant%40debian.org[Vagrant] provides and hosts 16 'armhf' systems:
+ ** two quad-cores with 4 GB RAM each,
+ ** nine quad-cores with 2 GB RAM each,
** two quad-cores with 1 GB RAM and
** three dual-cores with 1 GB RAM.
* link:https://letsencrypt.org[Let's encrypt] provides free of charge SSL certificates for jenkins.debian.net, reproducible.debian.net and tests.reproducible-builds.org.
diff --git a/bin/jenkins_node_definitions.sh b/bin/jenkins_node_definitions.sh
index a6ea57d..81d2836 100755
--- a/bin/jenkins_node_definitions.sh
+++ b/bin/jenkins_node_definitions.sh
@@ -4,7 +4,7 @@
# released under the GPLv=2
# define Debian build nodes in use
-BUILD_NODES="profitbricks-build1-amd64.debian.net profitbricks-build2-amd64.debian.net profitbricks-build5-amd64.debian.net profitbricks-build6-amd64.debian.net wbq0-armhf-rb.debian.net cbxi4a-armhf-rb.debian.net cbxi4pro0-armhf-rb.debian.net bpi0-armhf-rb.debian.net hb0-armhf-rb.debian.net odxu4-armhf-rb.debian.net wbd0-armhf-rb.debian.net rpi2b-armhf-rb.debian.net rpi2c-armhf-rb.debian.net odxu4b-armhf-rb.debian.net odxu4c-armhf-rb.debian.net ff2a-armhf-rb.debian.net ff2b-armhf-rb.debi [...]
+BUILD_NODES="profitbricks-build1-amd64.debian.net profitbricks-build2-amd64.debian.net profitbricks-build5-amd64.debian.net profitbricks-build6-amd64.debian.net wbq0-armhf-rb.debian.net cbxi4a-armhf-rb.debian.net cbxi4b-armhf-rb.debian.net cbxi4pro0-armhf-rb.debian.net bpi0-armhf-rb.debian.net hb0-armhf-rb.debian.net odxu4-armhf-rb.debian.net wbd0-armhf-rb.debian.net rpi2b-armhf-rb.debian.net rpi2c-armhf-rb.debian.net odxu4b-armhf-rb.debian.net odxu4c-armhf-rb.debian.net ff2a-armhf-rb.de [...]
# return the ports sshd is listening on
get_node_ssh_port() {
@@ -22,6 +22,9 @@ get_node_ssh_port() {
cbxi4a-armhf-rb.debian.net)
PORT=2239
;;
+ cbxi4b-armhf-rb.debian.net)
+ PORT=2240
+ ;;
cbxi4pro0-armhf-rb.debian.net)
PORT=2226
;;
diff --git a/hosts/cbxi4b b/hosts/cbxi4b
new file mode 120000
index 0000000..0993fa5
--- /dev/null
+++ b/hosts/cbxi4b
@@ -0,0 +1 @@
+cbxi4b-armhf-rb
\ No newline at end of file
diff --git a/hosts/cbxi4b-armhf-rb/etc/apt/apt.conf.d/80proxy b/hosts/cbxi4b-armhf-rb/etc/apt/apt.conf.d/80proxy
new file mode 100644
index 0000000..9e73825
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/apt/apt.conf.d/80proxy
@@ -0,0 +1,2 @@
+Acquire::http::Proxy "http://10.0.0.15:8000/";
+
diff --git a/hosts/cbxi4b-armhf-rb/etc/apt/listchanges.conf b/hosts/cbxi4b-armhf-rb/etc/apt/listchanges.conf
new file mode 100644
index 0000000..8b598c0
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/apt/listchanges.conf
@@ -0,0 +1,6 @@
+[apt]
+frontend=mail
+email_address=root
+confirm=0
+save_seen=/var/lib/apt/listchanges.db
+which=both
diff --git a/hosts/cbxi4b-armhf-rb/etc/apt/sources.list b/hosts/cbxi4b-armhf-rb/etc/apt/sources.list
new file mode 100644
index 0000000..7066928
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/apt/sources.list
@@ -0,0 +1,11 @@
+deb http://ftp.us.debian.org/debian/ jessie main contrib non-free
+#deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free
+
+deb http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
+#deb-src http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
+
+deb http://security.debian.org/ jessie/updates main contrib non-free
+#deb-src http://security.debian.org/ jessie/updates main contrib non-free
+
+deb http://ftp.us.debian.org/debian/ jessie-backports main contrib non-free
+#deb-src http://ftp.us.debian.org/debian/ jessie-backports main contrib non-free
diff --git a/hosts/cbxi4b-armhf-rb/etc/cron.d/dsa b/hosts/cbxi4b-armhf-rb/etc/cron.d/dsa
new file mode 100755
index 0000000..9be64c3
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/cron.d/dsa
@@ -0,0 +1,10 @@
+# m h dom mon dow (0|7=sun,1=mon) command
+
+#
+# cron-jobs for jenkins.debian.net and nodes
+#
+
+MAILTO=root
+
+0 1,13 * * * nobody /usr/bin/chronic /usr/local/bin/dsa-check-running-kernel
+2 1,13 * * * nobody /usr/bin/chronic /usr/local/bin/dsa-check-packages
diff --git a/hosts/cbxi4b-armhf-rb/etc/munin/munin-node.conf b/hosts/cbxi4b-armhf-rb/etc/munin/munin-node.conf
new file mode 100644
index 0000000..597ccaf
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/munin/munin-node.conf
@@ -0,0 +1,66 @@
+#
+# Example config-file for munin-node
+#
+
+log_level 4
+log_file /var/log/munin/munin-node.log
+pid_file /var/run/munin/munin-node.pid
+
+background 1
+setsid 1
+
+user root
+group root
+
+# This is the timeout for the whole transaction.
+# Units are in sec. Default is 15 min
+#
+# global_timeout 900
+
+# This is the timeout for each plugin.
+# Units are in sec. Default is 1 min
+#
+# timeout 60
+
+# Regexps for files to ignore
+ignore_file [\#~]$
+ignore_file DEADJOE$
+ignore_file \.bak$
+ignore_file %$
+ignore_file \.dpkg-(tmp|new|old|dist)$
+ignore_file \.rpm(save|new)$
+ignore_file \.pod$
+
+# Set this if the client doesn't report the correct hostname when
+# telnetting to localhost, port 4949
+#
+#host_name localhost.localdomain
+
+# A list of addresses that are allowed to connect. This must be a
+# regular expression, since Net::Server does not understand CIDR-style
+# network notation unless the perl module Net::CIDR is installed. You
+# may repeat the allow line as many times as you'd like
+
+allow ^127\.0\.0\.1$
+allow ^::1$
+
+# If you have installed the Net::CIDR perl module, you can use one or more
+# cidr_allow and cidr_deny address/mask patterns. A connecting client must
+# match any cidr_allow, and not match any cidr_deny. Note that a netmask
+# *must* be provided, even if it's /32
+#
+# Example:
+#
+# cidr_allow 127.0.0.1/32
+# cidr_allow 192.0.2.0/24
+# cidr_deny 192.0.2.42/32
+
+# Which address to bind to;
+host *
+# host 127.0.0.1
+
+# And which port
+port 4949
+
+allow ^78\.137\.96\.196
+hostname cbxi4b-armhf-rb.debian.net
diff --git a/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/df b/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/df
new file mode 100644
index 0000000..b3fdadc
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/df
@@ -0,0 +1,6 @@
+[df*]
+env.exclude none unknown iso9660 squashfs udf romfs ramfs debugfs devtmpfs sysfs
+env.exclude_re /srv/workspace/pbuilder /run /dev/disk/by /var/lib/schroot/mount /srv/workspace/varlibschroot /dev/shm /sys/fs/cgroup
+env.warning 92
+env.critical 98
+
diff --git a/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/diskstats b/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/diskstats
new file mode 100644
index 0000000..2d11f39
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/diskstats
@@ -0,0 +1,4 @@
+[diskstats]
+env.trim_labels yes
+env.include_only /dev/sda
+
diff --git a/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/munin-node b/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/munin-node
new file mode 100644
index 0000000..e766928
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/munin/plugin-conf.d/munin-node
@@ -0,0 +1,117 @@
+# This file is used to configure how the plugins are invoked.
+# Place in /etc/munin/plugin-conf.d/ or corresponding directory.
+#
+# PLEASE NOTE: Changes in the plugin-conf.d directory are only
+# read at munin-node startup, so restart at any changes.
+#
+# user <user> # Set the user to run the plugin as.
+# group <group> # Set the group to run the plugin as.
+# command <command> # Run <command> instead of the plugin. %c expands to
+# what would normally be run.
+# env.<variable> <value> # Sets <variable> in the plugin's environment, see the
+# individual plugins to find out which variables they
+# care about.
+
+
+[amavis]
+group adm
+env.MUNIN_MKTEMP /bin/mktemp -p /tmp/ $1
+env.amavislog /var/log/mail.info
+
+[apt]
+user root
+
+[courier_mta_mailqueue]
+group daemon
+
+[courier_mta_mailstats]
+group adm
+
+[courier_mta_mailvolume]
+group adm
+
+[cps*]
+user root
+
+[exim_mailqueue]
+group adm, (Debian-exim)
+
+[exim_mailstats]
+group adm, (Debian-exim)
+env.logdir /var/log/exim4/
+env.logname mainlog
+
+[fw_conntrack]
+user root
+
+[fw_forwarded_local]
+user root
+
+[hddtemp_smartctl]
+user root
+
+[hddtemp2]
+user root
+
+[if_*]
+user root
+
+[if_err_*]
+user nobody
+
+[ip_*]
+user root
+
+[ipmi_*]
+user root
+
+[mysql*]
+user root
+env.mysqlopts --defaults-file=/etc/mysql/debian.cnf
+env.mysqluser debian-sys-maint
+env.mysqlconnection DBI:mysql:mysql;mysql_read_default_file=/etc/mysql/debian.cnf
+
+[postfix_mailqueue]
+user postfix
+
+[postfix_mailstats]
+group adm
+
+[postfix_mailvolume]
+group adm
+env.logfile mail.log
+
+[smart_*]
+user root
+
+[vlan*]
+user root
+
+[ejabberd*]
+user ejabberd
+env.statuses available away chat xa
+env.days 1 7 30
+
+[dhcpd3]
+user root
+env.leasefile /var/lib/dhcp3/dhcpd.leases
+env.configfile /etc/dhcp3/dhcpd.conf
+
+[jmx_*]
+env.ip 127.0.0.1
+env.port 5400
+
+[samba]
+user root
+
+[munin_stats]
+user munin
+group munin
+
+[postgres_*]
+user postgres
+env.PGUSER postgres
+env.PGPORT 5432
+
+[fail2ban]
+user root
diff --git a/hosts/cbxi4b-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds b/hosts/cbxi4b-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds
new file mode 100755
index 0000000..e990c12
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds
@@ -0,0 +1,56 @@
+#!/bin/sh
+# -*- sh -*-
+
+: << =cut
+
+=head1 NAME
+
+jenkins_reproducible_builds - Plugin to measure number of reproducible builds running
+
+=head1 AUTHOR
+
+Contributed by Holger Levsen
+
+=head1 LICENSE
+
+GPLv2
+
+=head1 MAGIC MARKERS
+
+ #%# family=auto
+ #%# capabilities=autoconf
+
+=cut
+
+. $MUNIN_LIBDIR/plugins/plugin.sh
+
+if [ "$1" = "autoconf" ]; then
+ echo yes
+ exit 0
+fi
+
+JOB_PREFIXES="first second"
+if [ "$1" = "config" ]; then
+ echo 'graph_title Concurrent reproducible builds running'
+ echo 'graph_args --base 1000 -l 0 '
+ echo 'graph_scale no'
+ echo 'graph_total total'
+ echo 'graph_vlabel Concurrent reproducible builds running'
+ echo 'graph_category jenkins'
+ draw=AREA
+ for PREFIX in $JOB_PREFIXES ; do
+ echo "jenkins_reproducible_${PREFIX}_build.label $PREFIX build"
+ echo "jenkins_reproducible_${PREFIX}_build.draw $draw"
+ if [ "$draw" = "AREA" ] ; then draw=STACK ; fi
+ done
+ exit 0
+fi
+
+for PREFIX in $JOB_PREFIXES ; do
+ if [ "$PREFIX" = "first" ] ; then
+ NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 1")
+ else
+ NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 2")
+ fi
+ echo "jenkins_reproducible_${PREFIX}_build.value $NR"
+ done
diff --git a/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/B01_cleanup b/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/B01_cleanup
new file mode 100755
index 0000000..bbea69f
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/B01_cleanup
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+set -e
+
+BUILDDIR="${BUILDDIR:-/tmp/buildd}"
+
+# exit if we are in the same UTS namespace as init ( != 2nd build )
+[ "$(readlink /proc/1/ns/uts)" = "$(readlink /proc/self/ns/uts)" ] && exit 0
+
+# cease using disorderfs
+if [ -d /tmp/disorderfs ] ; then
+ echo -n "Unmounting /tmp/disorderfs…"
+ fusermount -u "$BUILDDIR"
+ rmdir "$BUILDDIR"
+ mv /tmp/disorderfs "$BUILDDIR"
+ echo " done."
+fi
diff --git a/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/C01_cleanup b/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/C01_cleanup
new file mode 100755
index 0000000..73f4083
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/C01_cleanup
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+set -e
+
+BUILDDIR="${BUILDDIR:-/tmp/buildd}"
+
+echo "debug output: disk usage on $(hostname) at $(date -u)"
+df -h
+echo
+
+# exit if we are in the same UTS namespace as init ( != 2nd build )
+[ "$(readlink /proc/1/ns/uts)" = "$(readlink /proc/self/ns/uts)" ] && exit 0
+
+# cease using disorderfs
+if [ -d /tmp/disorderfs ] ; then
+ echo -n "Unmounting /tmp/disorderfs…"
+ fusermount -u "$BUILDDIR"
+ rmdir "$BUILDDIR"
+ mv /tmp/disorderfs "$BUILDDIR"
+ echo " done."
+fi
diff --git a/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/D01_modify_environment b/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/D01_modify_environment
new file mode 100755
index 0000000..dda7694
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/pbuilder/rebuild-hooks/D01_modify_environment
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+set -e
+
+BUILDDIR="${BUILDDIR:-/tmp/buildd}"
+
+# exit if we are in the same UTS namespace as init ( != 2nd build )
+[ "$(readlink /proc/1/ns/uts)" = "$(readlink /proc/self/ns/uts)" ] && exit 0
+
+echo "I: Changing host+domainname to test build reproducibility" >&2
+sed -e '/^127.0.0.1/s/$/ i-capture-the-hostname i-capture-the-hostname.i-capture-the-domain/' -i /etc/hosts
+hostname i-capture-the-hostname
+domainname i-capture-the-domain
+echo "I: Adding a custom variable just for the fun of it..." >&2
+export CAPTURE_ENVIRONMENT="I capture the environment"
+
+# temporarily disable disorderfs as we have problems properly unmounting it
+exit 0
+
+# use disorderfs
+if [ -x /usr/bin/disorderfs ] ; then
+ echo -n "Moving $BUILDDIR to /tmp/disorderfs and mounting this as $BUILDDIR via the fuse disorderfs…"
+ mknod -m 666 /dev/fuse c 10 229
+ mv "$BUILDDIR" /tmp/disorderfs
+ mkdir "$BUILDDIR"
+ disorderfs --multi-user=yes /tmp/disorderfs "$BUILDDIR"
+ echo " done."
+else
+ echo "Warning: disorderfs not available."
+fi
diff --git a/hosts/cbxi4b-armhf-rb/etc/pbuilderrc b/hosts/cbxi4b-armhf-rb/etc/pbuilderrc
new file mode 100644
index 0000000..30fcc2e
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/pbuilderrc
@@ -0,0 +1,31 @@
+# this is your configuration file for pbuilder.
+# the file in /usr/share/pbuilder/pbuilderrc is the default template.
+# /etc/pbuilderrc is the one meant for overwriting defaults in
+# the default template
+#
+# read pbuilderrc.5 document for notes on specific options.
+case $HOSTNAME in
+ jenkins|profitbricks-build?-amd64) MIRRORSITE=http://ftp.de.debian.org/debian ;;
+ bpi0|cbxi4*|hb0|wbq0|odxu4*|wbd0|rpi2*|ff2*|opi2*) MIRRORSITE=http://ftp.us.debian.org/debian ;;
+ *) echo "unsupported host, exiting." ; exit 1 ;;
+esac
+EXTRAPACKAGES="" # better list them in bin/reproducible_setup_pbuilder.sh
+APTCACHE=""
+COMPRESSPROG="pigz"
+BUILDPLACE=/srv/workspace/pbuilder # build in /srv/workspace, which is in tmpfs
+# unset proxy, see #780587
+unset http_proxy
+export -n http_proxy
+# /sys and /proc were added as workarounds for #773767
+# there are software wanting /dev/shm writable, so give them so. There are tons
+# of bug shm related in pbuilder, that's just a workaround for all of them.
+# /run/shm is already mounted as a tmpfs by default.
+BINDMOUNTS="$BINDMOUNTS /sys /dev/shm"
+# set PATH to predictable values, see #780729 and #780725
+PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
+
+# used for reproducible builds tests, when doing the 2nd build
+if [ "$(readlink /proc/1/ns/uts)" != "$(readlink /proc/self/ns/uts)" ]; then
+ PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path"
+fi
+
diff --git a/hosts/cbxi4b-armhf-rb/etc/postfix/main.cf b/hosts/cbxi4b-armhf-rb/etc/postfix/main.cf
new file mode 100644
index 0000000..7301de0
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/postfix/main.cf
@@ -0,0 +1,41 @@
+# See /usr/share/postfix/main.cf.dist for a commented, more complete version
+
+
+# Debian specific: Specifying a file name will cause the first
+# line of that file to be used as the name. The Debian default
+# is /etc/mailname.
+#myorigin = /etc/mailname
+
+smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
+biff = no
+
+# appending .domain is the MUA's job.
+append_dot_mydomain = no
+
+# Uncomment the next line to generate "delayed mail" warnings
+#delay_warning_time = 4h
+
+readme_directory = no
+
+# TLS parameters
+smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
+smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
+smtpd_use_tls=yes
+smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
+smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
+
+# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
+# information on enabling SSL in the smtp client.
+
+myhostname = cbxi4b-armhf-rb.debian.net
+alias_maps = hash:/etc/aliases
+alias_database = hash:/etc/aliases
+myorigin = /etc/mailname
+mydestination = cbxi4b-armhf-rb.debian.net, localhost
+relayhost =
+#mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
+mynetworks = 127.0.0.0/8
+mailbox_size_limit = 0
+recipient_delimiter = +
+inet_interfaces = all
+mailbox_command = /usr/bin/procmail -a "$EXTENSION"
diff --git a/hosts/cbxi4b-armhf-rb/etc/rc.local b/hosts/cbxi4b-armhf-rb/etc/rc.local
new file mode 100755
index 0000000..1c4ece1
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/rc.local
@@ -0,0 +1,16 @@
+#!/bin/sh -e
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+echo "$(date -u) - system was rebooted" | mail -s "$(hostname -f) rebooted" root
+
+exit 0
diff --git a/hosts/cbxi4b-armhf-rb/etc/schroot/default/fstab b/hosts/cbxi4b-armhf-rb/etc/schroot/default/fstab
new file mode 100644
index 0000000..74468dd
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/schroot/default/fstab
@@ -0,0 +1,24 @@
+# fstab: static file system information for chroots.
+# Note that the mount point will be prefixed by the chroot path
+# (CHROOT_PATH)
+#
+# <file system> <mount point> <type> <options> <dump> <pass>
+/proc /proc none rw,bind 0 0
+/sys /sys none rw,bind 0 0
+/dev /dev none rw,bind 0 0
+/dev/pts /dev/pts none rw,bind 0 0
+/home /home none rw,bind 0 0
+/tmp /tmp none rw,bind 0 0
+/srv/reproducible-results /srv/reproducible-results none rw,bind 0 0
+/srv/d-i /srv/d-i none rw,bind 0 0
+/srv/jenkins /srv/jenkins none rw,bind 0 0
+/srv/live-build /srv/live-build none rw,bind 0 0
+
+# It may be desirable to have access to /run, especially if you wish
+# to run additional services in the chroot. However, note that this
+# may potentially cause undesirable behaviour on upgrades, such as
+# killing services on the host.
+#/run /run none rw,bind 0 0
+#/run/lock /run/lock none rw,bind 0 0
+/dev/shm /dev/shm none rw,bind 0 0
+/run/shm /run/shm none rw,bind 0 0
diff --git a/hosts/cbxi4b-armhf-rb/etc/schroot/default/nssdatabases b/hosts/cbxi4b-armhf-rb/etc/schroot/default/nssdatabases
new file mode 100644
index 0000000..72615e5
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/schroot/default/nssdatabases
@@ -0,0 +1,11 @@
+# System databases to copy into the chroot from the host system.
+#
+# <database name>
+passwd
+shadow
+group
+gshadow
+#services
+protocols
+networks
+hosts
diff --git a/hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins b/hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins
new file mode 100644
index 0000000..b3e138e
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins
@@ -0,0 +1,53 @@
+jenkins ALL= \
+ NOPASSWD: /usr/sbin/debootstrap *, \
+ /usr/bin/tee /schroots/*, \
+ /usr/bin/tee -a /schroots/*, \
+ /usr/bin/tee /etc/schroot/chroot.d/jenkins*, \
+ /bin/chmod +x /schroots/*, \
+ /usr/sbin/chroot /schroots/*, \
+ /usr/sbin/chroot /chroots/*, \
+ /usr/sbin/chroot /media/*, \
+ /bin/ls -la /media/*, \
+ /bin/rm -rf --one-file-system /chroots/*, \
+ /bin/rm -rf --one-file-system /schroots/*, \
+ /bin/rm -rf --one-file-system /srv/live-build/*, \
+ /bin/rm -rf --one-file-system /srv/workspace/pbuilder/*, \
+ /bin/cp -v *.iso /srv/live-build/results/*, \
+ /bin/mv /chroots/* /schroots/*, \
+ /bin/mv /schroots/* /schroots/*, \
+ /bin/umount -l /chroots/*, \
+ /bin/umount -l /schroots/*, \
+ /bin/umount -l /media/*, \
+ /bin/rmdir /media/*, \
+ /bin/mount -o loop*, \
+ /bin/mount --bind *, \
+ /usr/bin/du *, \
+ /bin/kill *, \
+ /usr/bin/file *, \
+ /bin/dd if=/dev/zero of=/dev/jenkins*, \
+ /usr/bin/qemu-system-x86_64 *, \
+ /usr/bin/qemu-img *, \
+ /sbin/lvcreate *, /sbin/lvremove *, \
+ /bin/mkdir -p /media/*, \
+ /usr/bin/guestmount *, \
+ /bin/cp -rv /media/*, \
+ /bin/chown -R jenkins\:jenkins /var/lib/jenkins/jobs/*,\
+ SETENV: NOPASSWD: /usr/sbin/pbuilder *, \
+ SETENV: NOPASSWD: /usr/bin/timeout -k 12.1h 12h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder *, \
+ SETENV: NOPASSWD: /usr/bin/timeout -k 12.1h 12h /usr/bin/ionice -c 3 /usr/bin/nice /usr/bin/unshare --uts -- /usr/sbin/pbuilder *, \
+ SETENV: NOPASSWD: /usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder *, \
+ SETENV: NOPASSWD: /usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/bin/unshare --uts -- /usr/sbin/pbuilder *, \
+ /bin/mv /var/cache/pbuilder/*base*.tgz /var/cache/pbuilder/*base*.tgz, \
+ /bin/rm /var/cache/pbuilder/*base*.tgz, \
+ /bin/rm -v /var/cache/pbuilder/*base*.tgz, \
+ /bin/rm /var/cache/pbuilder/result/*, \
+ /usr/bin/dcmd rm *.changes, \
+ /usr/bin/dcmd rm *.dsc, \
+ /usr/bin/apt-get update, \
+ /usr/bin/killall timeout, \
+ /usr/sbin/slay 1111, \
+ /usr/sbin/slay 2222, \
+ /usr/sbin/slay jenkins
+
+# keep these environment variables
+Defaults env_keep += "http_proxy", env_reset
diff --git a/hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins-adm b/hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins-adm
new file mode 100644
index 0000000..3c357be
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/etc/sudoers.d/jenkins-adm
@@ -0,0 +1,7 @@
+# allow member of the jenkins-adm group to sudo-to the jenkins-adm user (owner
+# of jenkins script) and the jenkins user itself
+%jenkins-adm ALL=(jenkins:jenkins) NOPASSWD: ALL
+%jenkins-adm ALL=(jenkins-adm:jenkins-adm) NOPASSWD: ALL
+# allow jenkins-adm to run everything as root
+%jenkins-adm ALL= NOPASSWD: ALL
+
diff --git a/hosts/cbxi4b-armhf-rb/usr/local/bin/dsa-check-packages b/hosts/cbxi4b-armhf-rb/usr/local/bin/dsa-check-packages
new file mode 100755
index 0000000..28844e5
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/usr/local/bin/dsa-check-packages
@@ -0,0 +1,362 @@
+#!/usr/bin/perl
+
+# dsa-check-packages
+
+# checks for obsolete/local and upgradeable packages.
+#
+# packages for the obsolete/local check can be ignored, by
+# listing their full name in /etc/nagios/obsolete-packages-ignore
+# or by having a regex (starting a line with "/") that matches
+# the packagename in said file.
+#
+# Takes one optional argument, the location of the ignore file.
+
+
+# Copyright (C) 2008, 2009 Peter Palfrader <peter at palfrader.org>
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+use strict;
+use warnings;
+use English;
+
+my $IGNORE = "/etc/nagios/obsolete-packages-ignore";
+my $IGNORED = "/etc/nagios/obsolete-packages-ignore.d";
+
+my %CODE = (
+ 'OK' => 0,
+ 'WARNING' => 1,
+ 'CRITICAL' => 2,
+ 'UNKNOWN' => 3
+);
+my $EXITCODE = 'OK';
+sub record($) {
+ my ($newexit) = @_;
+ die "code $newexit not defined\n" unless defined $CODE{$newexit};
+
+ if ($CODE{$newexit} > $CODE{$EXITCODE}) {
+ $EXITCODE = $newexit;
+ };
+}
+
+
+
+sub get_packages {
+ $ENV{'COLUMNS'} = 1000;
+ $ENV{'LC_ALL'} = 'C';
+ open(F, "dpkg -l|") or die ("Cannot run dpkg: $!\n");
+ my @lines = <F>;
+ close(F);
+ chomp(@lines);
+
+ my $line;
+ my $has_arch = 0;
+ while (defined($line = shift @lines) && ($line !~ /\+\+\+/)) {
+ if ($line =~ /Architecture/) { $has_arch = 1; }
+ }
+
+ my %pkgs;
+ for $line (@lines) {
+ my ($state, $pkg, $version, $arch, undef) = split(/ */, $line);
+ $arch = '' unless $has_arch;
+ $pkgs{$state}{$pkg} = { 'installed' => $version, arch => $arch }
+ }
+
+ my $installed = $pkgs{'ii'};
+ delete $pkgs{'ii'};
+
+ my @installed_packages = keys(%$installed);
+ my @cmd = ("apt-cache", "policy", @installed_packages);
+
+ open my $olderr, ">&STDERR" or die "Can't dup STDERR: $!";
+ open STDERR, ">/dev/null" or die "Can't dup STDOUT: $!";
+ open (F, "-|", @cmd) or die ("Cannot run apt-cache policy: $!\n");
+ @lines = <F>;
+ close(F);
+ open STDERR, ">&", $olderr or die "Can't dup OLDERR: $!";
+ chomp(@lines);
+
+ my $pkgname = undef;
+ my $candidate_found = 0;
+ while (defined($line = shift @lines)) {
+ if ($line =~ /^([^ ]*):$/) {
+ # when we have multi-arch capable fu, we require that
+ # apt-cache policy output is in the same order as its
+ # arguments.
+ #
+ # We needs thi, because the output block in apt-cache
+ # policy does not show the arch:
+ #
+ # | weasel at stanley:~$ apt-cache policy libedit2:amd64
+ # | libedit2:
+ # | Installed: 2.11-20080614-5
+ # | Candidate: 2.11-20080614-5
+ #
+ # We replace the package name in the output with the
+ # one we asked for ($pkg:$arch) - but to match this up
+ # sanely we need the order to be correct.
+ #
+ # For squeeze systems (no m-a), apt-cache policy output
+ # is all different.
+ $pkgname = $1;
+ $candidate_found = 0;
+ if ($has_arch) {
+ my $from_list = shift @installed_packages;
+ next if ($pkgname eq $from_list); # no :$arch in pkgname we asked for
+
+ my $ma_fix_pkgname = $pkgname.':'.$installed->{$from_list}->{'arch'};
+ my $ma_fix_from_list = $from_list.':'.$installed->{$from_list}->{'arch'};
+
+ if ($pkgname eq $ma_fix_from_list || # e.g. ia32-libs-i386. dpkg -l: ia32-libs-i386, apt-cache policy: ia32-libs-i386:i386
+ $ma_fix_pkgname eq $from_list) {
+ $pkgname = $from_list;
+ } else {
+ die "Unexpected order mismatch in apt-cache policy output (apt-cache policy name: $pkgname - dpkg -l name: $from_list)\n";
+ }
+ }
+ } elsif ($line =~ /^ +Installed: (.*)$/) {
+ # etch dpkg -l does not print epochs, so use this info, it's better
+ $installed->{$pkgname}{'installed'} = $1;
+ # initialize security-update
+ $installed->{$pkgname}{'security-update'} = 0;
+ } elsif ($line =~ /^ +Candidate: (.*)$/) {
+ $installed->{$pkgname}{'candidate'} = $1;
+ } elsif ($line =~ / ([^ ]+) [0-9]+/) {
+ # check if the next lines show the sources of our candidate
+ if ($1 eq $installed->{$pkgname}{'candidate'}) {
+ $candidate_found = 1;
+ }
+ } elsif (($line =~ / +[0-9]+ [^ ]+\/(security\.([^ ]+\.)?debian\.org|debian-security).*\/updates\//) && $candidate_found ) {
+ $installed->{$pkgname}{'security-update'} = 1;
+ } elsif ($line =~ /^ +\*\*\*/) {
+ $line = shift @lines;
+ my @l = split(/ +/, $line);
+ $installed->{$pkgname}{'origin'} = $l[2];
+ $candidate_found = 0;
+ }
+ }
+
+ my (%current, %obsolete, %outofdate, %security_outofdate);
+ for my $pkgname (keys %$installed) {
+ my $pkg = $installed->{$pkgname};
+
+ unless (defined($pkg->{'candidate'}) && defined($pkg->{'origin'})) {
+ $obsolete{$pkgname} = $pkg;
+ next;
+ }
+
+ if ($pkg->{'candidate'} ne $pkg->{'installed'}) {
+ if ($pkg->{'security-update'}) {
+ $security_outofdate{$pkgname} = $pkg;
+ } else {
+ $outofdate{$pkgname} = $pkg;
+ }
+ next;
+ };
+ if ($pkg->{'origin'} eq '/var/lib/dpkg/status') {
+ $obsolete{$pkgname} = $pkg;
+ next;
+ }
+ $current{$pkgname} = $pkg;
+ }
+
+ $pkgs{'current'} = \%current;
+ $pkgs{'outofdate'} = \%outofdate;
+ $pkgs{'security_outofdate'} = \%security_outofdate;
+ $pkgs{'obsolete'} = \%obsolete;
+ return \%pkgs;
+}
+
+sub load_ignores {
+ my ($ignorefiles, $require_file) = @_;
+
+ my @ignores;
+
+ for my $ignoreitem (@$ignorefiles) {
+ next if (!$require_file and ! -e $ignoreitem);
+
+ my @filestoopen;
+ if (-d $ignoreitem) {
+ opendir(DIR, $ignoreitem) or die ("Cannot open dir $ignoreitem: $!\n");
+ @filestoopen = readdir(DIR);
+ closedir(DIR);
+
+ @filestoopen = grep { -f ($ignoreitem.'/'.$_) } @filestoopen;
+ @filestoopen = grep { /^([a-z0-9_.-]+)+[a-z0-9]+$/i } @filestoopen;
+ @filestoopen = grep { !/dpkg-(old|dist|new|tmp)$/ } @filestoopen;
+ @filestoopen = map { ($ignoreitem.'/'.$_) } @filestoopen;
+ } else {
+ push @filestoopen, $ignoreitem;
+ }
+
+ for my $f (@filestoopen) {
+ open (F, "< $f") or die ("Cannot open $f: $!\n");
+ push @ignores, <F>;
+ close F;
+ }
+ }
+ chomp(@ignores);
+ return \@ignores;
+}
+
+sub check_ignore {
+ my ($pkg, $ignores) = @_;
+
+ my $ignore_this = 0;
+ for my $ignore (@$ignores) {
+ my $ig = $ignore;
+ return 1 if ($ig eq $pkg);
+ if (substr($ig,0,1) eq '/') {
+ substr($ig, 0, 1, '');
+ $ig =~ s,/$,,;
+ return 1 if ($pkg =~ /$ig/);
+ }
+ }
+ return 0
+}
+
+sub filter_ignored {
+ my ($packages, $ignores) = @_;
+
+ my $obs = $packages->{'obsolete'};
+
+ my (%ignored, %bad);
+ for my $pkg (keys %$obs) {
+ if (check_ignore($pkg, $ignores)) {
+ $ignored{$pkg} = $obs->{$pkg};
+ } else {
+ $bad{$pkg} = $obs->{$pkg};
+ };
+ }
+ delete $packages->{'obsolete'};
+ $packages->{'obsolete'} = \%bad;
+ $packages->{'obsolete-ignored'} = \%ignored;
+};
+
+sub usage {
+ my ($fd, $exit) = @_;
+ print $fd "Usage: $PROGRAM_NAME [<ignorefile|dir> [<ignorefile|dir> ...]]\n";
+ exit $exit;
+}
+
+my $ignorefiles = [$IGNORE, $IGNORED];
+my $ignorefile_userset = 0;
+if (@ARGV >= 1) {
+ usage(\*STDOUT, 0) if ($ARGV[0] eq "-h");
+ usage(\*STDOUT, 0) if ($ARGV[0] eq "--help");
+ $ignorefile_userset = 1;
+ $ignorefiles = \@ARGV;
+};
+
+my $ignores = load_ignores($ignorefiles, $ignorefile_userset);
+my $packages = get_packages();
+
+filter_ignored($packages, $ignores);
+
+
+
+my @reportform = (
+ { 'key' => 'obsolete',
+ 'listpackages' => 1,
+ 'long' => "%d local or obsolete packages: %s",
+ 'short' => "%d obs/loc",
+ 'perf' => "obs_loc=%d;1;5;0",
+ 'status' => 'WARNING' },
+ { 'key' => 'outofdate',
+ 'listpackages' => 1,
+ 'long' => "%d out of date packages: %s",
+ 'short' => "%d updates",
+ 'perf' => "outdated=%d;1;5;0",
+ 'status' => 'WARNING' },
+ { 'key' => 'current',
+ 'listpackages' => 0,
+ 'long' => "%d packages current.",
+ 'short' => "%d ok",
+ 'perf' => "current=%d;;;0",
+ 'status' => 'OK' },
+ { 'key' => 'obsolete-ignored',
+ 'listpackages' => 1,
+ 'long' => "%d whitelisted local or obsolete packages: %s",
+ 'short' => "%d obs/loc(ignored)",
+ 'perf' => "obs_ign=%d;;;0",
+ 'status' => 'OK' },
+ { 'key' => 'rc',
+ 'listpackages' => 1,
+ 'long' => "%d packages removed but not purged: %s",
+ 'short' => "%d rc",
+ 'perf' => "rm_unprg=%d;;;0",
+ 'status' => 'OK' },
+ { 'key' => 'hi',
+ 'listpackages' => 1,
+ 'long' => "%d packages on hold: %s",
+ 'short' => "%d hi",
+ 'perf' => "hold=%d;;;0",
+ 'status' => 'OK' },
+ { 'key' => 'pc',
+ 'listpackages' => 1,
+ 'long' => "%d packages requested to be purged but conffiles still installed: %s",
+ 'short' => "%d pc",
+ 'perf' => "prg_conf=%d;1;;0",
+ 'status' => 'WARNING' },
+ { 'key' => 'security_outofdate',
+ 'listpackages' => 1,
+ 'long' => "%d packages with outstanding security updates: %s",
+ 'short' => "%d security-updates",
+ 'perf' => "security_outdated=%d;;1;0",
+ 'status' => 'CRITICAL' },
+ );
+
+my @longout;
+my @perfout;
+my @shortout;
+for my $form (@reportform) {
+ my $pkgs = $packages->{$form->{'key'}};
+ delete $packages->{$form->{'key'}};
+ my $num = scalar keys %$pkgs;
+ push @perfout, sprintf($form->{'perf'}, $num);
+ next unless ($num > 0);
+ if ($form->{'listpackages'}) {
+ my $list = join(", ", keys %$pkgs);
+ push @longout, sprintf($form->{'long'}, $num, $list);
+ } else {
+ push @longout, sprintf($form->{'long'}, $num);
+ };
+ push @shortout, sprintf($form->{'short'}, $num);
+ record($form->{'status'});
+};
+if (scalar keys %$packages) {
+ record('WARNING');
+ unshift @shortout, "unk: ".join(", ", keys %$packages);
+ for my $status (sort {$b cmp $a} keys %$packages) {
+ my $pkgs = $packages->{$status};
+ my $list = join(", ", keys %$pkgs);
+ unshift @longout, "Unknown package status $status: $list";
+ };
+}
+
+my $shortout = $EXITCODE.": ".join(", ", @shortout);
+my $longout = join("\n", @longout);
+my $perfout = "|".join(" ", @perfout);
+
+print $shortout,"\n";
+print $longout,"\n";
+print $perfout,"\n";
+
+exit $CODE{$EXITCODE};
diff --git a/hosts/cbxi4b-armhf-rb/usr/local/bin/dsa-check-running-kernel b/hosts/cbxi4b-armhf-rb/usr/local/bin/dsa-check-running-kernel
new file mode 100755
index 0000000..80f45bf
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/usr/local/bin/dsa-check-running-kernel
@@ -0,0 +1,252 @@
+#!/bin/bash
+
+# Check if the running kernel has the same version string as the on-disk
+# kernel image.
+
+# Copyright 2008,2009,2011,2012,2013,2014 Peter Palfrader
+# Copyright 2009 Stephen Gran
+# Copyright 2010,2012,2013 Uli Martens
+# Copyright 2011 Alexander Reichle-Schmehl
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+OK=0;
+WARNING=1;
+CRITICAL=2;
+UNKNOWN=3;
+
+get_offset() {
+ local file needle
+
+ file="$1"
+ needle="$2"
+
+ perl -e '
+ undef $/;
+ $i = 0; $k=<>;
+ while (($i = index($k, "'"$needle"'", $i)) >= 0) {
+ print $i++,"\n";
+ }; ' < "$file"
+}
+
+get_avail() {
+ # This is wrong, but leaves room for when we have to care for machines running
+ # myfirstunix-image-0.1-dsa-arm
+ local prefix="$1"; shift
+
+ local kervers=$(uname -r)
+
+ local metavers=''
+
+ # DSA uses kernel versions of the form 2.6.29.3-dsa-dl380-oldxeon, where
+ # Debian uses versions of the form 2.6.29-2-amd64
+ if [ "${kervers#3}" != "$kervers" ]; then
+ metavers=$(echo $kervers | sed -r -e 's/^3\.[0-9]+(\.[0-9])?+-[A-Za-z0-9\.]+-(.*)/\2/')
+ elif [ "${kervers//dsa}" != "$kervers" ]; then
+ metavers=$(echo $kervers | sed -r -e 's/^2\.(4|6)\.[0-9]+([\.0-9]+?)-(.*)/2.\1-\3/')
+ else
+ metavers=$(echo $kervers | sed -r -e 's/^2\.(4|6)\.[0-9]+-[A-Za-z0-9\.]+-(.*)/2.\1-\2/')
+ fi
+
+ # Attempt to track back to a metapackage failed. bail
+ if [ "$metavers" = "$kervers" ]; then
+ return 2
+ fi
+
+ # We're just going to give up if we can't find a matching metapackage
+ # I tried being strict once, and it just caused a lot of headaches. We'll see how
+ # being lax does for us
+
+ local output=$(apt-cache policy ${prefix}-image-${metavers} 2>/dev/null)
+ local metaavailvers=$(echo "$output" | grep '^ Candidate:' | awk '{print $2}')
+ local metainstavers=$(echo "$output" | grep '^ Installed:' | awk '{print $2}')
+
+ if [ -z "$metaavailvers" ] || [ "$metaavailvers" = '(none)' ]; then
+ return 2
+ fi
+ if [ -z "$metainstavers" ] || [ "$metainstavers" = '(none)' ]; then
+ return 2
+ fi
+
+ if [ "$metaavailvers" != "$metainstavers" ] ; then
+ echo "${prefix}-image-${metavers} $metaavailvers available but $metainstavers installed"
+ return 1
+ fi
+
+ local imagename=0
+ # --no-all-versions show shows only the candidate
+ for vers in $(apt-cache --no-all-versions show ${prefix}-image-${metavers} | sed -n 's/^Depends: //p' | tr ',' '\n' | tr -d ' ' | grep ${prefix}-image | awk '{print $1}' | sort -u); do
+ if dpkg --compare-versions "1.$vers" gt "1.$imagename"; then
+ imagename=$vers
+ fi
+ done
+
+ if [ -z "$imagename" ] || [ "$imagename" = 0 ]; then
+ return 2
+ fi
+
+ if [ "$imagename" != "${prefix}-image-${kervers}" ]; then
+ if dpkg --compare-versions 1."$imagename" lt 1."${prefix}-image-${kervers}"; then
+ return 2
+ fi
+ echo "$imagename" != "${prefix}-image-${kervers}"
+ return 1
+ fi
+
+ local availvrs=$(apt-cache policy ${imagename} 2>/dev/null | grep '^ Candidate' | awk '{print $2}')
+ local kernelversion=$(apt-cache policy ${prefix}-image-${kervers} 2>/dev/null | grep '^ Installed:' | awk '{print $2}')
+
+ if [ "$availvrs" = "$kernelversion" ]; then
+ return 0
+ fi
+
+ echo "$kernelversion != $availvrs"
+ return 1
+}
+
+cat_vmlinux() {
+ local image header filter hdroff
+
+ image="$1"
+ header="$2"
+ filter="$3"
+ hdroff="$4"
+
+ get_offset "$image" $header | head -n 5 | while read off; do
+ (if [ "$off" != 0 ]; then
+ dd ibs="$((off+hdroff))" skip=1 count=0
+ fi &&
+ dd bs=512k) < "$image" 2>/dev/null | $filter 2>/dev/null
+ done
+}
+
+get_image_linux() {
+ local image
+
+ image="$1"
+
+ # gzip compressed image
+ cat_vmlinux "$image" "\x1f\x8b\x08\x00" "zcat" 0
+ cat_vmlinux "$image" "\x1f\x8b\x08\x08" "zcat" 0
+ # lzma compressed image
+ cat_vmlinux "$image" "\x00\x00\x00\x02\xff" "xzcat" -1
+ cat_vmlinux "$image" "\x00\x00\x00\x04\xff" "xzcat" -1
+ # xz compressed image
+ cat_vmlinux "$image" "\xfd\x37\x7a\x58\x5a " "xzcat" 0
+
+ echo "ERROR: Unable to extract kernel image." 2>&1
+ exit 1
+}
+
+
+freebsd_check_running_version() {
+ local imagefile="$1"; shift
+
+ local r="$(uname -r)"
+ local v="$(uname -v| sed -e 's/^#[0-9]*/&:/')"
+
+ local q='@(#)FreeBSD '"$r $v"
+
+ if zcat "$imagefile" | $STRINGS | grep -F -q "$q"; then
+ echo "OK"
+ else
+ echo "not OK"
+ fi
+}
+
+STRINGS="";
+if [ -x "$(which strings)" ]; then
+ STRINGS="$(which strings)"
+elif [ -x "$(which busybox)" -a "$( echo foobar | $(which busybox) strings 2>/dev/null)" = "foobar" ]; then
+ STRINGS="$(which busybox) strings"
+fi
+
+searched=""
+for on_disk in \
+ "/boot/vmlinuz-`uname -r`"\
+ "/boot/vmlinux-`uname -r`"\
+ "/boot/kfreebsd-`uname -r`.gz"; do
+
+ if [ -e "$on_disk" ]; then
+ if [ -z "$STRINGS" ]; then
+ echo "UNKNOWN: 'strings' command missing, perhaps install binutils or busybox?"
+ exit $UNKNOWN
+ fi
+ if [ "${on_disk/vmlinu}" != "$on_disk" ]; then
+ on_disk_version="`get_image_linux "$on_disk" | $STRINGS | grep 'Linux version' | head -n1`"
+ if [ -x /usr/bin/lsb_release ] ; then
+ vendor=$(lsb_release -i -s)
+ if [ -n "$vendor" ] && [ "xDebian" != "x$vendor" ] ; then
+ on_disk_version=$( echo $on_disk_version|sed -e "s/ ($vendor [[:alnum:]\.-]\+ [[:alnum:]\.]\+)//")
+ fi
+ fi
+ [ -z "$on_disk_version" ] || break
+ on_disk_version="`cat "$on_disk" | $STRINGS | grep 'Linux version' | head -n1`"
+ [ -z "$on_disk_version" ] || break
+
+ echo "UNKNOWN: Failed to get a version string from image $on_disk"
+ exit $UNKNOWN
+ else
+ on_disk_version="$(zcat $on_disk | $STRINGS | grep Debian | head -n 1 | sed -e 's/Debian [[:alnum:]]\+ (\(.*\))/\1/')"
+ fi
+ fi
+ searched="$searched $on_disk"
+done
+
+if ! [ -e "$on_disk" ]; then
+ echo "WARNING: Did not find a kernel image (checked$searched) - I have no idea which kernel I am running"
+ exit $WARNING
+fi
+
+if [ "$(uname -s)" = "Linux" ]; then
+ running_version="`cat /proc/version`"
+ if [ -z "$running_version" ] ; then
+ echo "UNKNOWN: Failed to get a version string from running system"
+ exit $UNKNOWN
+ fi
+
+ if [ "$running_version" != "$on_disk_version" ]; then
+ echo "WARNING: Running kernel does not match on-disk kernel image: [$running_version != $on_disk_version]"
+ exit $WARNING
+ fi
+
+ ret="$(get_avail linux)"
+ if [ $? = 1 ]; then
+ echo "WARNING: Kernel needs upgrade [$ret]"
+ exit $WARNING
+ fi
+else
+ image_current=$(freebsd_check_running_version $on_disk)
+ running_version="`uname -s` `uname -r` `uname -v`"
+ if [ "$image_current" != "OK" ]; then
+ approx_time="$(date -d "@`stat -c '%Y' "$on_disk"`" +"%Y-%m-%d %H:%M:%S")"
+ echo "WARNING: Currently running kernel ($running_version) does not match on disk image (~ $approx_time)"
+ exit $WARNING;
+ fi
+
+ ret="$(get_avail linux)"
+ if [ $? = 1 ]; then
+ echo "WARNING: Kernel needs upgrade [$ret]"
+ exit $WARNING
+ fi
+fi
+
+echo "OK: Running kernel matches on disk image: [$running_version]"
+exit $OK
diff --git a/hosts/cbxi4b-armhf-rb/usr/local/sbin/nagios-check-libs b/hosts/cbxi4b-armhf-rb/usr/local/sbin/nagios-check-libs
new file mode 100755
index 0000000..77b3780
--- /dev/null
+++ b/hosts/cbxi4b-armhf-rb/usr/local/sbin/nagios-check-libs
@@ -0,0 +1,204 @@
+#!/usr/bin/perl -w
+
+# Copyright (C) 2005, 2006, 2007, 2008, 2012, 2015 Peter Palfrader <peter at palfrader.org>
+# 2012 Uli Martens <uli at youam.net>
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+use strict;
+use English;
+use Getopt::Long;
+
+$ENV{'PATH'} = '/bin:/sbin:/usr/bin:/usr/sbin';
+delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'};
+
+my $LSOF = '/usr/bin/lsof -F0';
+my $VERSION = '0.2015012901';
+
+# nagios exit codes
+my $OK = 0;
+my $WARNING = 1;
+my $CRITICAL = 2;
+my $UNKNOWN = 3;
+
+my $params;
+my $config;
+
+Getopt::Long::config('bundling');
+
+sub dief {
+ print STDERR @_;
+ exit $UNKNOWN;
+}
+
+if (!GetOptions (
+ '--help' => \$params->{'help'},
+ '--version' => \$params->{'version'},
+ '--quiet' => \$params->{'quiet'},
+ '--verbose' => \$params->{'verbose'},
+ '-v' => \$params->{'verbose'},
+ '--config=s' => \$params->{'config'},
+ )) {
+ dief ("$PROGRAM_NAME: Usage: $PROGRAM_NAME [--help|--version] [--verbose] [--quiet] [--config=<CONFIGFILE>]\n");
+};
+if ($params->{'help'}) {
+ print "$PROGRAM_NAME: Usage: $PROGRAM_NAME [--help|--version] [--verbose] [--quiet] [--config=<CONFIGFILE>]\n";
+ print "Reports processes that are linked against libraries that no longer exist.\n";
+ print "The optional config file can specify ignore rules - see the sample config file.\n";
+ exit (0);
+};
+if ($params->{'version'}) {
+ print "nagios-check-libs $VERSION\n";
+ print "nagios check for availability of debian (security) updates\n";
+ print "Copyright (c) 2005, 2006, 2007, 2008, 2012 Peter Palfrader <peter\@palfrader.org>\n";
+ exit (0);
+};
+
+if (! defined $params->{'config'}) {
+ $params->{'config'} = '/etc/nagios/check-libs.conf';
+} elsif (! -e $params->{'config'}) {
+ dief("Config file $params->{'config'} does not exist.\n");
+}
+
+if (-e $params->{'config'}) {
+ eval "use YAML::Syck; 1" or dief "you need YAML::Syck (libyaml-syck-perl) to load a config file";
+ open(my $fh, '<', $params->{'config'}) or dief "Cannot open config file $params->{'config'}: $!";
+ $config = LoadFile($fh);
+ close($fh);
+ if (!(ref($config) eq "HASH")) {
+ dief("Loaded config is not a hash!\n");
+ }
+} else {
+ $config = {
+ 'ignorelist' => [
+ '$path =~ m#^/proc/#',
+ '$path =~ m#^/var/tmp/#',
+ '$path =~ m#^/SYS#',
+ '$path =~ m#^/drm$# # xserver stuff',
+ '$path =~ m#^/dev/zero#',
+ '$path =~ m#^/dev/shm/#',
+ ]
+ };
+}
+
+if (! exists $config->{'ignorelist'}) {
+ $config->{'ignorelist'} = [];
+} elsif (! (ref($config->{'ignorelist'}) eq 'ARRAY')) {
+ dief("Config->ignorelist is not an array!\n");
+}
+
+
+my %processes;
+
+sub getPIDs($$) {
+ my ($user, $process) = @_;
+ return join(', ', sort keys %{ $processes{$user}->{$process} });
+};
+sub getProcs($) {
+ my ($user) = @_;
+
+ return join(', ', map { $_.' ('.getPIDs($user, $_).')' } (sort {$a cmp $b} keys %{ $processes{$user} }));
+};
+sub getUsers() {
+ return join('; ', (map { $_.': '.getProcs($_) } (sort {$a cmp $b} keys %processes)));
+};
+sub inVserver() {
+ my ($f, $key);
+ if (-e "/proc/self/vinfo" ) {
+ $f = "/proc/self/vinfo";
+ $key = "XID";
+ } else {
+ $f = "/proc/self/status";
+ $key = "s_context";
+ };
+ open(F, "< $f") or return 0;
+ while (<F>) {
+ my ($k, $v) = split(/: */, $_, 2);
+ if ($k eq $key) {
+ close F;
+ return ($v > 0);
+ };
+ };
+ close F;
+ return 0;
+}
+
+my $INVSERVER = inVserver();
+
+print STDERR "Running $LSOF -n\n" if $params->{'verbose'};
+open (LSOF, "$LSOF -n|") or dief ("Cannot run $LSOF -n: $!\n");
+my @lsof=<LSOF>;
+close LSOF;
+if ($CHILD_ERROR) { # program failed
+ dief("$LSOF -n returned with non-zero exit code: ".($CHILD_ERROR / 256)."\n");
+};
+
+my ($process, $pid, $user);
+LINE: for my $line (@lsof) {
+ if ( $line =~ /^p/ ) {
+ my %fields = map { m/^(.)(.*)$/ ; $1 => $2 } grep { defined $_ and length $_ >1} split /\0/, $line;
+ $process = $fields{c};
+ $pid = $fields{p};
+ $user = $fields{L};
+ next;
+ }
+
+ unless ( $line =~ /^f/ ) {
+ dief("UNKNOWN strange line read from lsof\n");
+ # don't print it because it contains NULL characters...
+ }
+
+ my %fields = map { m/^(.)(.*)$/ ; $1 => $2 } grep { defined $_ and length $_ >1} split /\0/, $line;
+
+ my $fd = $fields{f};
+ my $inode = $fields{i};
+ my $path = $fields{n};
+ if ($path =~ m/\.dpkg-/ || $path =~ m/\(deleted\)/ || $path =~ /path inode=/ || $path =~ m#/\.nfs# || $fd eq 'DEL') {
+ my $deleted_in_path = ($path =~ m/\(deleted\)/ || $path =~ m/\.nfs/);
+ next if ($deleted_in_path && $fd =~ /^[0-9]*$/); # Ignore deleted files that are open via normal file handles.
+ next if ($deleted_in_path && $fd eq 'cwd'); # Ignore deleted directories that we happen to be in.
+
+ $path =~ s/^\(deleted\)//; # in some cases "(deleted)" is at the beginning of the string
+ for my $i (@{$config->{'ignorelist'}}) {
+ my $ignore = eval($i);
+ next LINE if $ignore;
+ }
+ next if ($INVSERVER && ($process eq 'init') && ($pid == 1) && ($user eq 'root'));
+ if ( $params->{'verbose'} ) {
+ print STDERR "adding $process($pid) because of [$path]:\n";
+ print STDERR $line;
+ }
+ $processes{$user}->{$process}->{$pid} = 1;
+ };
+};
+
+
+
+my $message='';
+my $exit = $OK;
+if (keys %processes) {
+ $exit = $WARNING;
+ $message = 'The following processes have libs linked that were upgraded: '. getUsers()."\n";
+} else {
+ $message = "No upgraded libs linked in running processes\n" unless $params->{'quiet'};
+};
+
+print $message;
+exit $exit;
diff --git a/hosts/jenkins/etc/munin/munin.conf b/hosts/jenkins/etc/munin/munin.conf
index 6585239..b8c336d 100644
--- a/hosts/jenkins/etc/munin/munin.conf
+++ b/hosts/jenkins/etc/munin/munin.conf
@@ -238,6 +238,16 @@ contact.me.command mail -s "Munin notification ${var:host}" root
diskstats_utilization.graph no
diskstats_iops.graph no
+[cbxi4b-armhf-rb.debian.net]
+ address ssh://jenkins@cbxi4b-armhf-rb.debian.net:2240/bin/nc localhost 4949
+ use_node_name yes
+ diskstats_latency.sda.avgwrwait.warning 0:20
+ diskstats_latency.sda.avgrdwait.warning 0:10
+ diskstats_latency.graph no
+ diskstats_throughput.graph no
+ diskstats_utilization.graph no
+ diskstats_iops.graph no
+
[cbxi4pro0-armhf-rb.debian.net]
address ssh://jenkins@cbxi4pro0-armhf-rb.debian.net:2226/bin/nc localhost 4949
use_node_name yes
@@ -398,5 +408,5 @@ contact.me.command mail -s "Munin notification ${var:host}" root
# node_order Totals fii.foo.com fay.foo.com
#
[debian.net;]
- node_order jenkins.debian.net profitbricks-build1-amd64.debian.net profitbricks-build2-amd64.debian.net profitbricks-build3-amd64.debian.net profitbricks-build4-amd64.debian.net profitbricks-build5-amd64.debian.net profitbricks-build6-amd64.debian.net bpi0-armhf-rb.debian.net cbxi4a-armhf-rb.debian.net cbxi4pro0-armhf-rb.debian.net ff2a-armhf-rb.debian.net ff2b-armhf-rb.debian.net hb0-armhf-rb.debian.net odxu4-armhf-rb.debian.net odxu4b-armhf-rb.debian.net odxu4c-armhf-rb.debian.net opi [...]
+ node_order jenkins.debian.net profitbricks-build1-amd64.debian.net profitbricks-build2-amd64.debian.net profitbricks-build3-amd64.debian.net profitbricks-build4-amd64.debian.net profitbricks-build5-amd64.debian.net profitbricks-build6-amd64.debian.net bpi0-armhf-rb.debian.net cbxi4a-armhf-rb.debian.net cbxi4b-armhf-rb.debian.net cbxi4pro0-armhf-rb.debian.net ff2a-armhf-rb.debian.net ff2b-armhf-rb.debian.net hb0-armhf-rb.debian.net odxu4-armhf-rb.debian.net odxu4b-armhf-rb.debian.net odx [...]
diff --git a/job-cfg/reproducible.yaml b/job-cfg/reproducible.yaml
index 782f9f5..238c2d9 100644
--- a/job-cfg/reproducible.yaml
+++ b/job-cfg/reproducible.yaml
@@ -304,6 +304,7 @@
my_hname:
- 'bpi0': { my_arch: 'armhf' }
- 'cbxi4a': { my_arch: 'armhf' }
+ - 'cbxi4b': { my_arch: 'armhf' }
- 'cbxi4pro0': { my_arch: 'armhf' }
- 'ff2a': { my_arch: 'armhf' }
- 'ff2b': { my_arch: 'armhf' }
@@ -347,6 +348,7 @@
my_hname:
- 'bpi0': { my_arch: 'armhf' }
- 'cbxi4a': { my_arch: 'armhf' }
+ - 'cbxi4b': { my_arch: 'armhf' }
- 'cbxi4pro0': { my_arch: 'armhf' }
- 'ff2a': { my_arch: 'armhf' }
- 'ff2b': { my_arch: 'armhf' }
@@ -514,7 +516,10 @@
# could have all archs in one block, but it seems cleaner this way
# to choose new jobs:
- # for i in wbq0 cbxi4a cbxi4pro0 ff2a ff2b odxu4 odxu4b odxu4c opi2a opi2b rpi2b rpi2c bpi0 hb0 wbd0 ; do echo "$i: " ; grep my_node1 job-cfg/reproducible.yaml|grep armhf|grep $i-armhf ; echo ; done
+ # for i in wbq0 cbxi4a cbxi4b cbxi4pro0 ff2a ff2b odxu4 odxu4b odxu4c opi2a opi2b rpi2b rpi2c bpi0 hb0 wbd0 ; do echo "$i: " ; grep my_node1 job-cfg/reproducible.yaml|grep armhf|grep $i-armhf ; echo ; done
+ # 8 jobs for quad-cores with 4 gb ram
+ # 6 jobs for quad-cores with 2 gb ram
+ # 3 jobs for dual-cores with 1 gb ram
- '{name}_builder_{my_arch}_{my_num}':
my_description: 'Try to reproducibly build a scheduled package. This is one of several builder jobs.'
my_arch: 'armhf'
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/qa/jenkins.debian.net.git
More information about the Qa-jenkins-scm
mailing list