[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_6 #6635
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Mon Feb 15 00:47:26 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_armhf_6/6635/>
------------------------------------------
[...truncated 1704 lines...]
(okay overall)
-make[1]: Leaving directory '/build/ifupdown-0.8.10'
+make[1] : on quitte le répertoire « /build/ifupdown-0.8.10 »
fakeroot debian/rules binary
dh binary --parallel --with systemd
dh_testroot -O--parallel
@@ -335,29 +349,29 @@
dh_installdirs -O--parallel
dh_auto_install -O--parallel
make -j4 install DESTDIR=/build/ifupdown-0.8.10/debian/ifupdown AM_UPDATE_INFO_DIR=no
-make[1]: Entering directory '/build/ifupdown-0.8.10'
+make[1] : on entre dans le répertoire « /build/ifupdown-0.8.10 »
install -m 0755 -d /build/ifupdown-0.8.10/debian/ifupdown/sbin
install -m 0755 ifup /build/ifupdown-0.8.10/debian/ifupdown/sbin
ln -s /sbin/ifup /build/ifupdown-0.8.10/debian/ifupdown/sbin/ifdown
ln -s /sbin/ifup /build/ifupdown-0.8.10/debian/ifupdown/sbin/ifquery
install -D -m 0755 settle-dad.sh /build/ifupdown-0.8.10/debian/ifupdown/lib/ifupdown/settle-dad.sh
install -D -m 0755 wait-for-ll6.sh /build/ifupdown-0.8.10/debian/ifupdown/lib/ifupdown/wait-for-ll6.sh
-make[1]: Leaving directory '/build/ifupdown-0.8.10'
+make[1] : on quitte le répertoire « /build/ifupdown-0.8.10 »
dh_install -O--parallel
dh_installdocs -O--parallel
dh_installchangelogs -O--parallel
dh_installexamples -O--parallel
dh_installman -O--parallel
debian/rules override_dh_installifupdown
-make[1]: Entering directory '/build/ifupdown-0.8.10'
+make[1] : on entre dans le répertoire « /build/ifupdown-0.8.10 »
dh_installifupdown --name=upstart
-make[1]: Leaving directory '/build/ifupdown-0.8.10'
+make[1] : on quitte le répertoire « /build/ifupdown-0.8.10 »
debian/rules override_dh_systemd_enable
-make[1]: Entering directory '/build/ifupdown-0.8.10'
+make[1] : on entre dans le répertoire « /build/ifupdown-0.8.10 »
dh_systemd_enable --name=networking
-make[1]: Leaving directory '/build/ifupdown-0.8.10'
+make[1] : on quitte le répertoire « /build/ifupdown-0.8.10 »
debian/rules override_dh_installinit
-make[1]: Entering directory '/build/ifupdown-0.8.10'
+make[1] : on entre dans le répertoire « /build/ifupdown-0.8.10 »
dh_installinit --name=networking --no-start
install -p -m 0644 debian/networking.defaults debian/ifupdown/etc/default/networking
dh_installinit --name=network-interface-container --noscripts
@@ -365,12 +379,12 @@
dh_installinit --name=network-interface --noscripts
dh_installinit --name=networking --noscripts
dh_installinit --name=ifup@ --noscripts
-make[1]: Leaving directory '/build/ifupdown-0.8.10'
+make[1] : on quitte le répertoire « /build/ifupdown-0.8.10 »
dh_systemd_start -O--parallel
debian/rules override_dh_installudev
-make[1]: Entering directory '/build/ifupdown-0.8.10'
+make[1] : on entre dans le répertoire « /build/ifupdown-0.8.10 »
dh_installudev --priority=80
-make[1]: Leaving directory '/build/ifupdown-0.8.10'
+make[1] : on quitte le répertoire « /build/ifupdown-0.8.10 »
dh_lintian -O--parallel
dh_perl -O--parallel
dh_link -O--parallel
@@ -380,34 +394,84 @@
dh_strip -O--parallel
dh_makeshlibs -O--parallel
dh_shlibdeps -O--parallel
-dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/ifupdown/sbin/ifup was not linked against ld-linux-armhf.so.3 (it uses none of the library's symbols)
+dpkg-shlibdeps: avertissement: la dépendance pourrait être évitée si « debian/ifupdown/sbin/ifup » n'y était pas lié avec ld-linux-armhf.so.3 sans nécessité (il n'utilise aucun des symboles de la bibliothèque)
dh_installdeb -O--parallel
dh_gencontrol -O--parallel
-dpkg-gencontrol: warning: Depends field of package ifupdown: unknown substitution variable ${net:Depends}
-dpkg-gencontrol: warning: Suggests field of package ifupdown: unknown substitution variable ${net:Suggests}
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: Depends field of package ifupdown: unknown substitution variable ${net:Depends}
-dpkg-gencontrol: warning: Suggests field of package ifupdown: unknown substitution variable ${net:Suggests}
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-gencontrol: avertissement: champ Depends du paquet ifupdown : variable de substitution inconnue ${net:Depends}
+dpkg-gencontrol: avertissement: champ Suggests du paquet ifupdown : variable de substitution inconnue ${net:Suggests}
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: champ Depends du paquet ifupdown : variable de substitution inconnue ${net:Depends}
+dpkg-gencontrol: avertissement: champ Suggests du paquet ifupdown : variable de substitution inconnue ${net:Suggests}
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dh_md5sums -O--parallel
dh_builddeb -O--parallel
-dpkg-deb: building package 'ifupdown-dbgsym' in '../ifupdown-dbgsym_0.8.10_armhf.deb'.
-dpkg-deb: building package 'ifupdown' in '../ifupdown_0.8.10_armhf.deb'.
+dpkg-deb : construction du paquet « ifupdown-dbgsym » dans « ../ifupdown-dbgsym_0.8.10_armhf.deb ».
+dpkg-deb : construction du paquet « ifupdown » dans « ../ifupdown_0.8.10_armhf.deb ».
dpkg-genbuildinfo >../ifupdown_0.8.10_armhf.buildinfo
dpkg-distaddfile ifupdown_0.8.10_armhf.buildinfo admin important
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../ifupdown_0.8.10_armhf.changes
-dpkg-genchanges: warning: package ifupdown-dbgsym listed in files list but not in control info
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: avertissement: paquet ifupdown-dbgsym listé dans le fichier de liste des fichiers mais pas dans le fichier info
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build ifupdown-0.8.10
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/10440/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/10440/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/5570 and its subdirectories
-I: Current time: Sun Feb 14 12:39:13 GMT+12 2016
-I: pbuilder-time-stamp: 1455496753
+I: removing directory /srv/workspace/pbuilder/10440 and its subdirectories
+I: Current time: Mon Feb 15 14:42:13 GMT-14 2016
+I: pbuilder-time-stamp: 1455496933
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/testing/armhf/ifupdown_0.8.10.diff: 80.9% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/testing/armhf/ifupdown_0.8.10.diff.gz
b2/build.log: 80.4%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 78.9%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/testing/armhf/ifupdown_0.8.10.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-yVmT1YJy/tmp.H47ShOhyuX
+ mv /srv/reproducible-results/rbuild-debian-yVmT1YJy/tmp.H47ShOhyuX /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/ifupdown_0.8.10.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/ifupdown_0.8.10.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-yVmT1YJy
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-yVmT1YJy/tmp.33PcZ8v17j
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/ifupdown_0.8.10.rbuild.log
+ local TIMEOUT=120m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-yVmT1YJy -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-yVmT1YJy/dbd-tmp-gIMzeG0
++ schroot --directory /srv/reproducible-results/rbuild-debian-yVmT1YJy -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 48'
++ echo diffoscope 48
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/ifupdown_0.8.10.rbuild.log
++ date -u
+ echo 'Mon Feb 15 00:42:23 UTC 2016 - diffoscope 48 will be used to compare the two builds:'
Mon Feb 15 00:42:23 UTC 2016 - diffoscope 48 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-yVmT1YJy -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-yVmT1YJy/dbd-tmp-gIMzeG0 ; diffoscope --html /srv/reproducible-results/rbuild-debian-yVmT1YJy/ifupdown_0.8.10.diffoscope.html --text /srv/reproducible-results/rbuild-debian-yVmT1YJy/ifupdown_0.8.10.diffoscope.txt /srv/reproducible-results/rbuild-debian-yVmT1YJy/b1/ifupdown_0.8.10_armhf.buildinfo /srv/reproducible-results/rbuild-debian-yVmT1YJy/b2/ifupdown_0.8.10_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-yVmT1YJy/tmp.33PcZ8v17j
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ __ _
(_)/ _|_ _ _ __ __| | _____ ___ __
| | |_| | | | '_ \ / _` |/ _ \ \ /\ / / '_ \
| | _| |_| | |_) | (_| | (_) \ V V /| | | |
|_|_| \__,_| .__/ \__,_|\___/ \_/\_/ |_| |_|
|_|
diffoscope 48 found no differences in the changes files, and a .buildinfo file also exists.
ifupdown from testing built successfully and reproducibly on armhf.
Error: database is locked
Error: database is locked
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/ifupdown_0.8.10.rbuild.log: 74.4% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/ifupdown_0.8.10.rbuild.log.gz
INFO: Starting at 2016-02-15 00:46:25.516599
CRITICAL: Error executing this query:
CRITICAL: SELECT r.status, r.version, r.build_date FROM results AS r JOIN sources AS s ON r.package_id=s.id WHERE s.name="ifupdown" AND s.architecture="amd64" AND s.suite="testing"
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "/srv/jenkins/bin/reproducible_common.py", line 725, in __init__
self._status[suite][arch] = Build(self.name, suite, arch)
File "/srv/jenkins/bin/reproducible_common.py", line 692, in __init__
self._get_package_status()
File "/srv/jenkins/bin/reproducible_common.py", line 701, in _get_package_status
result = query_db(query)[0]
File "/srv/jenkins/bin/reproducible_common.py", line 359, in query_db
cursor.execute(query)
sqlite3.OperationalError: database is locked
INFO: Finished at 2016-02-15 00:47:25.949796, took: 0:01:00.433213
Warning: cannot update html pages for ifupdown
Mon 15 Feb 00:47:25 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-rAavDzG8, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list