[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_29 #24871
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Feb 27 15:21:32 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_amd64_29/24871/>
------------------------------------------
[...truncated 7345 lines...]
+make[5] : on entre dans le répertoire « /build/nted-1.10.18/doc/de »
+make[5]: rien à faire pour « install-exec-am ».
/usr/bin/install -c -D -m "u=rw,og=r" index.docbook /build/nted-1.10.18/debian/tmp/usr/share/doc/nted/de/index.docbook
-make[5]: Leaving directory '/build/nted-1.10.18/doc/de'
-make[4]: Leaving directory '/build/nted-1.10.18/doc/de'
+make[5] : on quitte le répertoire « /build/nted-1.10.18/doc/de »
+make[4] : on quitte le répertoire « /build/nted-1.10.18/doc/de »
Making install in it
-make[4]: Entering directory '/build/nted-1.10.18/doc/it'
-make[5]: Entering directory '/build/nted-1.10.18/doc/it'
-make[5]: Nothing to be done for 'install-exec-am'.
+make[4] : on entre dans le répertoire « /build/nted-1.10.18/doc/it »
+make[5] : on entre dans le répertoire « /build/nted-1.10.18/doc/it »
+make[5]: rien à faire pour « install-exec-am ».
/usr/bin/install -c -D -m "u=rw,og=r" index.docbook /build/nted-1.10.18/debian/tmp/usr/share/doc/nted/it/index.docbook
-make[5]: Leaving directory '/build/nted-1.10.18/doc/it'
-make[4]: Leaving directory '/build/nted-1.10.18/doc/it'
+make[5] : on quitte le répertoire « /build/nted-1.10.18/doc/it »
+make[4] : on quitte le répertoire « /build/nted-1.10.18/doc/it »
Making install in es
-make[4]: Entering directory '/build/nted-1.10.18/doc/es'
-make[5]: Entering directory '/build/nted-1.10.18/doc/es'
-make[5]: Nothing to be done for 'install-exec-am'.
+make[4] : on entre dans le répertoire « /build/nted-1.10.18/doc/es »
+make[5] : on entre dans le répertoire « /build/nted-1.10.18/doc/es »
+make[5]: rien à faire pour « install-exec-am ».
/usr/bin/install -c -D -m "u=rw,og=r" index.docbook /build/nted-1.10.18/debian/tmp/usr/share/doc/nted/es/index.docbook
-make[5]: Leaving directory '/build/nted-1.10.18/doc/es'
-make[4]: Leaving directory '/build/nted-1.10.18/doc/es'
+make[5] : on quitte le répertoire « /build/nted-1.10.18/doc/es »
+make[4] : on quitte le répertoire « /build/nted-1.10.18/doc/es »
Making install in fr
-make[4]: Entering directory '/build/nted-1.10.18/doc/fr'
-make[5]: Entering directory '/build/nted-1.10.18/doc/fr'
-make[5]: Nothing to be done for 'install-exec-am'.
+make[4] : on entre dans le répertoire « /build/nted-1.10.18/doc/fr »
+make[5] : on entre dans le répertoire « /build/nted-1.10.18/doc/fr »
+make[5]: rien à faire pour « install-exec-am ».
/usr/bin/install -c -D -m "u=rw,og=r" index.docbook /build/nted-1.10.18/debian/tmp/usr/share/doc/nted/fr/index.docbook
-make[5]: Leaving directory '/build/nted-1.10.18/doc/fr'
-make[4]: Leaving directory '/build/nted-1.10.18/doc/fr'
-make[4]: Entering directory '/build/nted-1.10.18/doc'
-make[5]: Entering directory '/build/nted-1.10.18/doc'
-make[5]: Nothing to be done for 'install-exec-am'.
-make[5]: Nothing to be done for 'install-data-am'.
-make[5]: Leaving directory '/build/nted-1.10.18/doc'
-make[4]: Leaving directory '/build/nted-1.10.18/doc'
-make[3]: Leaving directory '/build/nted-1.10.18/doc'
+make[5] : on quitte le répertoire « /build/nted-1.10.18/doc/fr »
+make[4] : on quitte le répertoire « /build/nted-1.10.18/doc/fr »
+make[4] : on entre dans le répertoire « /build/nted-1.10.18/doc »
+make[5] : on entre dans le répertoire « /build/nted-1.10.18/doc »
+make[5]: rien à faire pour « install-exec-am ».
+make[5]: rien à faire pour « install-data-am ».
+make[5] : on quitte le répertoire « /build/nted-1.10.18/doc »
+make[4] : on quitte le répertoire « /build/nted-1.10.18/doc »
+make[3] : on quitte le répertoire « /build/nted-1.10.18/doc »
Making install in man
-make[3]: Entering directory '/build/nted-1.10.18/man'
-make[4]: Entering directory '/build/nted-1.10.18/man'
-make[4]: Nothing to be done for 'install-exec-am'.
+make[3] : on entre dans le répertoire « /build/nted-1.10.18/man »
+make[4] : on entre dans le répertoire « /build/nted-1.10.18/man »
+make[4]: rien à faire pour « install-exec-am ».
/bin/mkdir -p '/build/nted-1.10.18/debian/tmp/usr/share/man/man1'
/usr/bin/install -c -m 644 nted.1 '/build/nted-1.10.18/debian/tmp/usr/share/man/man1'
-make[4]: Leaving directory '/build/nted-1.10.18/man'
-make[3]: Leaving directory '/build/nted-1.10.18/man'
-make[2]: Leaving directory '/build/nted-1.10.18'
+make[4] : on quitte le répertoire « /build/nted-1.10.18/man »
+make[3] : on quitte le répertoire « /build/nted-1.10.18/man »
+make[2] : on quitte le répertoire « /build/nted-1.10.18 »
for file in $(find debian/tmp/usr/share/doc/nted -type f -name \*.docbook); do \
sed -i 's:"../docimages/:"/usr/share/doc/nted/docimages/:g' $file; \
done
-make[1]: Leaving directory '/build/nted-1.10.18'
+make[1] : on quitte le répertoire « /build/nted-1.10.18 »
dh_install -O--parallel
dh_installdocs -O--parallel
dh_installchangelogs -O--parallel
@@ -2041,39 +2060,89 @@
dh_link -O--parallel
dh_strip_nondeterminism -O--parallel
debian/rules override_dh_compress
-make[1]: Entering directory '/build/nted-1.10.18'
+make[1] : on entre dans le répertoire « /build/nted-1.10.18 »
dh_compress -X.docbook
-make[1]: Leaving directory '/build/nted-1.10.18'
+make[1] : on quitte le répertoire « /build/nted-1.10.18 »
dh_fixperms -O--parallel
dh_strip -O--parallel
dh_makeshlibs -O--parallel
dh_shlibdeps -O--parallel
dh_installdeb -O--parallel
dh_gencontrol -O--parallel
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dh_md5sums -O--parallel
dh_builddeb -O--parallel
-dpkg-deb: building package 'nted-dbgsym' in '../nted-dbgsym_1.10.18-10_amd64.deb'.
-dpkg-deb: building package 'nted-doc' in '../nted-doc_1.10.18-10_all.deb'.
-dpkg-deb: building package 'nted' in '../nted_1.10.18-10_amd64.deb'.
+dpkg-deb : construction du paquet « nted-dbgsym » dans « ../nted-dbgsym_1.10.18-10_amd64.deb ».
+dpkg-deb : construction du paquet « nted-doc » dans « ../nted-doc_1.10.18-10_all.deb ».
+dpkg-deb : construction du paquet « nted » dans « ../nted_1.10.18-10_amd64.deb ».
dpkg-genbuildinfo >../nted_1.10.18-10_amd64.buildinfo
dpkg-distaddfile nted_1.10.18-10_amd64.buildinfo sound optional
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../nted_1.10.18-10_amd64.changes
-dpkg-genchanges: warning: package nted-dbgsym listed in files list but not in control info
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: avertissement: paquet nted-dbgsym listé dans le fichier de liste des fichiers mais pas dans le fichier info
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build nted-1.10.18
-dpkg-source: info: using options from nted-1.10.18/debian/source/options: --extend-diff-ignore=(^|/)(aclocal\.m4|config\.h\.in|Makefile\.in|configure|[^/]*\.po)$
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-source: info: utilisation des options depuis nted-1.10.18/debian/source/options : --extend-diff-ignore=(^|/)(aclocal\.m4|config\.h\.in|Makefile\.in|configure|[^/]*\.po)$
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/29129/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/29129/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 175: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/3755 and its subdirectories
-I: Current time: Fri Mar 31 09:04:20 GMT+12 2017
-I: pbuilder-time-stamp: 1490994260
+I: removing directory /srv/workspace/pbuilder/29129 and its subdirectories
+I: Current time: Sun Feb 28 04:43:58 GMT-14 2016
+I: pbuilder-time-stamp: 1456584238
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/nted_1.10.18-10.diff: 88.6% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/nted_1.10.18-10.diff.gz
b2/build.log: 91.3%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 91.4%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/testing/amd64/nted_1.10.18-10.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-YGVsasm1/tmp.VQz1xFHo0U
+ mv /srv/reproducible-results/rbuild-debian-YGVsasm1/tmp.VQz1xFHo0U /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/nted_1.10.18-10.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/nted_1.10.18-10.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-YGVsasm1
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-YGVsasm1/tmp.Gu3ZcNk7H6
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/nted_1.10.18-10.rbuild.log
+ local TIMEOUT=120m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-YGVsasm1 -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-YGVsasm1/dbd-tmp-HVJSWmX
++ schroot --directory /srv/reproducible-results/rbuild-debian-YGVsasm1 -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 49'
++ echo diffoscope 49
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/nted_1.10.18-10.rbuild.log
++ date -u
+ echo 'Sat Feb 27 14:44:01 UTC 2016 - diffoscope 49 will be used to compare the two builds:'
Sat Feb 27 14:44:01 UTC 2016 - diffoscope 49 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-YGVsasm1 -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-YGVsasm1/dbd-tmp-HVJSWmX ; diffoscope --html /srv/reproducible-results/rbuild-debian-YGVsasm1/nted_1.10.18-10.diffoscope.html --text /srv/reproducible-results/rbuild-debian-YGVsasm1/nted_1.10.18-10.diffoscope.txt /srv/reproducible-results/rbuild-debian-YGVsasm1/b1/nted_1.10.18-10_amd64.buildinfo /srv/reproducible-results/rbuild-debian-YGVsasm1/b2/nted_1.10.18-10_amd64.buildinfo'
+ RESULT=1
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-YGVsasm1/tmp.Gu3ZcNk7H6
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
Sat Feb 27 14:54:30 UTC 2016 - nted failed to build reproducibly in testing on amd64.
INFO: Starting at 2016-02-27 14:54:31.266516
INFO: Finished at 2016-02-27 14:54:31.352896, took: 0:00:00.086399
Sat Feb 27 14:54:31 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/rb-pkg/testing/amd64/nted.html
Sat Feb 27 14:54:31 UTC 2016 - total duration: 0h 15m 47s.
/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/nted_1.10.18-10.rbuild.log: 90.7% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/nted_1.10.18-10.rbuild.log.gz
INFO: Starting at 2016-02-27 14:54:31.554992
INFO: Finished at 2016-02-27 14:54:31.564798, took: 0:00:00.009816
Sat 27 Feb 14:54:31 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-E8FcfwC2, which will now be removed.
FATAL: GC overhead limit exceeded
java.lang.OutOfMemoryError: GC overhead limit exceeded
More information about the Qa-jenkins-scm
mailing list