[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_4 #32585
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Wed Mar 23 00:48:40 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_amd64_4/32585/>
------------------------------------------
[...truncated 8642 lines...]
-make[2]: Leaving directory '/build/light-locker-1.7.0'
-make[1]: Leaving directory '/build/light-locker-1.7.0'
+make[2] : on entre dans le répertoire « /build/light-locker-1.7.0/data »
+make[2]: rien à faire pour « check ».
+make[2] : on quitte le répertoire « /build/light-locker-1.7.0/data »
+make[2] : on entre dans le répertoire « /build/light-locker-1.7.0 »
+make[2] : on quitte le répertoire « /build/light-locker-1.7.0 »
+make[1] : on quitte le répertoire « /build/light-locker-1.7.0 »
fakeroot debian/rules binary
dh binary --with autoreconf
dh_testroot
dh_prep
dh_auto_install
make -j1 install DESTDIR=/build/light-locker-1.7.0/debian/light-locker AM_UPDATE_INFO_DIR=no
-make[1]: Entering directory '/build/light-locker-1.7.0'
+make[1] : on entre dans le répertoire « /build/light-locker-1.7.0 »
Making install in src
-make[2]: Entering directory '/build/light-locker-1.7.0/src'
+make[2] : on entre dans le répertoire « /build/light-locker-1.7.0/src »
make install-am
-make[3]: Entering directory '/build/light-locker-1.7.0/src'
-make[4]: Entering directory '/build/light-locker-1.7.0/src'
+make[3] : on entre dans le répertoire « /build/light-locker-1.7.0/src »
+make[4] : on entre dans le répertoire « /build/light-locker-1.7.0/src »
/bin/mkdir -p '/build/light-locker-1.7.0/debian/light-locker/usr/bin'
- /bin/bash ../libtool --mode=install /usr/bin/install -c light-locker light-locker-command '/build/light-locker-1.7.0/debian/light-locker/usr/bin'
+ /bin/sh ../libtool --mode=install /usr/bin/install -c light-locker light-locker-command '/build/light-locker-1.7.0/debian/light-locker/usr/bin'
libtool: install: /usr/bin/install -c light-locker /build/light-locker-1.7.0/debian/light-locker/usr/bin/light-locker
libtool: install: /usr/bin/install -c light-locker-command /build/light-locker-1.7.0/debian/light-locker/usr/bin/light-locker-command
/bin/mkdir -p '/build/light-locker-1.7.0/debian/light-locker/etc/xdg/autostart'
/usr/bin/install -c -m 644 light-locker.desktop '/build/light-locker-1.7.0/debian/light-locker/etc/xdg/autostart'
-make[4]: Leaving directory '/build/light-locker-1.7.0/src'
-make[3]: Leaving directory '/build/light-locker-1.7.0/src'
-make[2]: Leaving directory '/build/light-locker-1.7.0/src'
+make[4] : on quitte le répertoire « /build/light-locker-1.7.0/src »
+make[3] : on quitte le répertoire « /build/light-locker-1.7.0/src »
+make[2] : on quitte le répertoire « /build/light-locker-1.7.0/src »
Making install in po
-make[2]: Entering directory '/build/light-locker-1.7.0/po'
+make[2] : on entre dans le répertoire « /build/light-locker-1.7.0/po »
linguas="af an ar as ast be at latin be bg bn_IN bn br ca ca at valencia crh cs cy da de dz el en_CA en_GB en at shaw eo es et eu fa fi fr_FR fr fur ga gl gu he hi hr hu id is it ja ka kk km kn ko ku lt lv mai mg mk ml mn mr ms my nb nds ne nl nn oc or pa pl ps pt_BR pt ro ru si sk sl sq sr at latin sr sv ta te th tr ug uk vi xh zh_CN zh_HK zh_TW "; \
for lang in $linguas; do \
dir=/build/light-locker-1.7.0/debian/light-locker/usr/share/locale/$lang/LC_MESSAGES; \
- /bin/bash /build/light-locker-1.7.0/install-sh -d $dir; \
+ /bin/sh /build/light-locker-1.7.0/install-sh -d $dir; \
if test -r $lang.gmo; then \
/usr/bin/install -c -m 644 $lang.gmo $dir/light-locker.mo; \
echo "installing $lang.gmo as $dir/light-locker.mo"; \
@@ -2374,11 +2398,11 @@
installing zh_CN.gmo as /build/light-locker-1.7.0/debian/light-locker/usr/share/locale/zh_CN/LC_MESSAGES/light-locker.mo
installing zh_HK.gmo as /build/light-locker-1.7.0/debian/light-locker/usr/share/locale/zh_HK/LC_MESSAGES/light-locker.mo
installing zh_TW.gmo as /build/light-locker-1.7.0/debian/light-locker/usr/share/locale/zh_TW/LC_MESSAGES/light-locker.mo
-make[2]: Leaving directory '/build/light-locker-1.7.0/po'
+make[2] : on quitte le répertoire « /build/light-locker-1.7.0/po »
Making install in data
-make[2]: Entering directory '/build/light-locker-1.7.0/data'
-make[3]: Entering directory '/build/light-locker-1.7.0/data'
-make[3]: Nothing to be done for 'install-exec-am'.
+make[2] : on entre dans le répertoire « /build/light-locker-1.7.0/data »
+make[3] : on entre dans le répertoire « /build/light-locker-1.7.0/data »
+make[3]: rien à faire pour « install-exec-am ».
/bin/mkdir -p '/build/light-locker-1.7.0/debian/light-locker/usr/share/man/man1'
/usr/bin/install -c -m 644 light-locker.1 light-locker-command.1 '/build/light-locker-1.7.0/debian/light-locker/usr/share/man/man1'
if test -n "apps.light-locker.gschema.xml"; then \
@@ -2386,15 +2410,15 @@
/usr/bin/install -c -m 644 apps.light-locker.gschema.xml "/build/light-locker-1.7.0/debian/light-locker/usr/share/glib-2.0/schemas"; \
test -n "/build/light-locker-1.7.0/debian/light-locker" || /usr/lib/x86_64-linux-gnu/glib-2.0/glib-compile-schemas /usr/share/glib-2.0/schemas; \
fi
-make[3]: Leaving directory '/build/light-locker-1.7.0/data'
-make[2]: Leaving directory '/build/light-locker-1.7.0/data'
-make[2]: Entering directory '/build/light-locker-1.7.0'
-make[3]: Entering directory '/build/light-locker-1.7.0'
-make[3]: Nothing to be done for 'install-exec-am'.
-make[3]: Nothing to be done for 'install-data-am'.
-make[3]: Leaving directory '/build/light-locker-1.7.0'
-make[2]: Leaving directory '/build/light-locker-1.7.0'
-make[1]: Leaving directory '/build/light-locker-1.7.0'
+make[3] : on quitte le répertoire « /build/light-locker-1.7.0/data »
+make[2] : on quitte le répertoire « /build/light-locker-1.7.0/data »
+make[2] : on entre dans le répertoire « /build/light-locker-1.7.0 »
+make[3] : on entre dans le répertoire « /build/light-locker-1.7.0 »
+make[3]: rien à faire pour « install-exec-am ».
+make[3]: rien à faire pour « install-data-am ».
+make[3] : on quitte le répertoire « /build/light-locker-1.7.0 »
+make[2] : on quitte le répertoire « /build/light-locker-1.7.0 »
+make[1] : on quitte le répertoire « /build/light-locker-1.7.0 »
dh_installdocs
dh_installchangelogs
dh_installman
@@ -2409,27 +2433,77 @@
dh_shlibdeps
dh_installdeb
dh_gencontrol
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'light-locker-dbgsym' in '../light-locker-dbgsym_1.7.0-3_amd64.deb'.
-dpkg-deb: building package 'light-locker' in '../light-locker_1.7.0-3_amd64.deb'.
+dpkg-deb : construction du paquet « light-locker-dbgsym » dans « ../light-locker-dbgsym_1.7.0-3_amd64.deb ».
+dpkg-deb : construction du paquet « light-locker » dans « ../light-locker_1.7.0-3_amd64.deb ».
dpkg-genbuildinfo >../light-locker_1.7.0-3_amd64.buildinfo
dpkg-distaddfile light-locker_1.7.0-3_amd64.buildinfo x11 optional
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../light-locker_1.7.0-3_amd64.changes
-dpkg-genchanges: warning: package light-locker-dbgsym listed in files list but not in control info
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: avertissement: paquet light-locker-dbgsym listé dans le fichier de liste des fichiers mais pas dans le fichier info
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build light-locker-1.7.0
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/56326/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/56326/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /sys filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 181: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting /dev/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 181: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting dev/pts filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 181: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting run/shm filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 181: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
+perl: warning: Setting locale failed.
+perl: warning: Please check that your locale settings:
+ LANGUAGE = (unset),
+ LC_ALL = "fr_CH.UTF-8",
+ LANG = "fr_CH.UTF-8"
+ are supported and installed on your system.
+perl: warning: Falling back to the standard locale ("C").
I: unmounting proc filesystem
+/usr/lib/pbuilder/pbuilder-modules: line 181: warning: setlocale: LC_ALL: cannot change locale (fr_CH.UTF-8)
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/47407 and its subdirectories
-I: Current time: Tue Mar 22 12:30:47 GMT+12 2016
-I: pbuilder-time-stamp: 1458693047
+I: removing directory /srv/workspace/pbuilder/56326 and its subdirectories
+I: Current time: Tue Apr 25 20:59:03 GMT-14 2017
+I: pbuilder-time-stamp: 1493103543
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/light-locker_1.7.0-3.diff: 86.3% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/testing/amd64/light-locker_1.7.0-3.diff.gz
b2/build.log: 85.6%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 85.1%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/testing/amd64/light-locker_1.7.0-3.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-4Pb1jw76/tmp.afup5sUnop
+ mv /srv/reproducible-results/rbuild-debian-4Pb1jw76/tmp.afup5sUnop /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/light-locker_1.7.0-3.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/light-locker_1.7.0-3.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-4Pb1jw76
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-4Pb1jw76/tmp.QNLJW2Fnip
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/light-locker_1.7.0-3.rbuild.log
+ local TIMEOUT=120m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-4Pb1jw76 -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-4Pb1jw76/dbd-tmp-6Hr00Dy
++ schroot --directory /srv/reproducible-results/rbuild-debian-4Pb1jw76 -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 51'
++ echo diffoscope 51
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/light-locker_1.7.0-3.rbuild.log
++ date -u
+ echo 'Wed Mar 23 00:36:06 UTC 2016 - diffoscope 51 will be used to compare the two builds:'
Wed Mar 23 00:36:06 UTC 2016 - diffoscope 51 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-4Pb1jw76 -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-4Pb1jw76/dbd-tmp-6Hr00Dy ; diffoscope --html /srv/reproducible-results/rbuild-debian-4Pb1jw76/light-locker_1.7.0-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian-4Pb1jw76/light-locker_1.7.0-3.diffoscope.txt /srv/reproducible-results/rbuild-debian-4Pb1jw76/b1/light-locker_1.7.0-3_amd64.buildinfo /srv/reproducible-results/rbuild-debian-4Pb1jw76/b2/light-locker_1.7.0-3_amd64.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-4Pb1jw76/tmp.QNLJW2Fnip
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _
| (_) __ _| |__ | |_ | | ___ ___| | _____ _ __
| | |/ _` | '_ \| __|____| |/ _ \ / __| |/ / _ \ '__|
| | | (_| | | | | ||_____| | (_) | (__| < __/ |
|_|_|\__, |_| |_|\__| |_|\___/ \___|_|\_\___|_|
|___/
diffoscope 51 found no differences in the changes files, and a .buildinfo file also exists.
light-locker from testing built successfully and reproducibly on amd64.
INFO: Starting at 2016-03-23 00:36:08.207409
INFO: Finished at 2016-03-23 00:36:08.216631, took: 0:00:00.009228
Wed Mar 23 00:36:08 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/rb-pkg/testing/amd64/light-locker.html
Wed Mar 23 00:36:08 UTC 2016 - total duration: 0h 7m 54s.
/var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/light-locker_1.7.0-3.rbuild.log: 84.1% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/testing/amd64/light-locker_1.7.0-3.rbuild.log.gz
INFO: Starting at 2016-03-23 00:36:08.397977
INFO: Finished at 2016-03-23 00:36:08.408315, took: 0:00:00.010346
Wed 23 Mar 00:36:08 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-KZ5bU0M3, which will now be removed.
Process leaked file descriptors. See http://wiki.jenkins-ci.org/display/JENKINS/Spawning+processes+from+build for more information
FATAL: GC overhead limit exceeded
java.lang.OutOfMemoryError: GC overhead limit exceeded
More information about the Qa-jenkins-scm
mailing list