[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_34 #3206
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Wed Apr 6 23:30:38 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_armhf_34/3206/>
------------------------------------------
[...truncated 1974 lines...]
Updating certificates in /etc/ssl/certs...
173 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Lecture des listes de paquets...
+Construction de l'arbre des dépendances...
+Lecture des informations d'état...
+Lecture de l'information d'état étendu...
+Initialisation de l'état des paquets...
+Écriture de l'information d'état étendu...
+Construction de la base de données des étiquettes...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lecture des listes de paquets…
+Construction de l'arbre des dépendances…
+Lecture des informations d'état…
fakeroot is already the newest version (1.20.2-1).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
I: Copying source file
I: copying [puppet-module-ceilometer_7.0.0-1.dsc]
I: copying [./puppet-module-ceilometer_7.0.0.orig.tar.xz]
I: copying [./puppet-module-ceilometer_7.0.0-1.debian.tar.xz]
I: Extracting source
-gpgv: keyblock resource `/root/.gnupg/trustedkeys.gpg': file open error
-gpgv: Signature made Tue Feb 9 20:53:37 2016 GMT+12 using RSA key ID AC6B43FE
-gpgv: Can't check signature: public key not found
-dpkg-source: warning: failed to verify signature on ./puppet-module-ceilometer_7.0.0-1.dsc
-dpkg-source: info: extracting puppet-module-ceilometer in puppet-module-ceilometer-7.0.0
-dpkg-source: info: unpacking puppet-module-ceilometer_7.0.0.orig.tar.xz
-dpkg-source: info: unpacking puppet-module-ceilometer_7.0.0-1.debian.tar.xz
+gpgv: ressource de bloc de clef « /root/.gnupg/trustedkeys.gpg » : erreur d'ouverture de fichier
+gpgv: Signature faite le mer 10 fév 2016 22:53:37 GMT-14 avec la clef RSA d'identifiant AC6B43FE
+gpgv: Impossible de vérifier la signature : clef publique introuvable
+dpkg-source: avertissement: impossible de vérifier la signature sur ./puppet-module-ceilometer_7.0.0-1.dsc
+dpkg-source: info: extraction de puppet-module-ceilometer dans puppet-module-ceilometer-7.0.0
+dpkg-source: info: extraction de puppet-module-ceilometer_7.0.0.orig.tar.xz
+dpkg-source: info: extraction de puppet-module-ceilometer_7.0.0-1.debian.tar.xz
I: Building the package
-I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent" dpkg-buildpackage -us -uc -b --buildinfo-identifier=armhf -rfakeroot
-dpkg-buildpackage: source package puppet-module-ceilometer
-dpkg-buildpackage: source version 7.0.0-1
-dpkg-buildpackage: source distribution unstable
-dpkg-buildpackage: source changed by Thomas Goirand <zigo at debian.org>
+W: no hooks of type A found -- ignoring
+I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent" dpkg-buildpackage -us -uc -b --buildinfo-identifier=armhf -rfakeroot
+dpkg-buildpackage: paquet source puppet-module-ceilometer
+dpkg-buildpackage: version source 7.0.0-1
+dpkg-buildpackage: distribution source unstable
+dpkg-buildpackage: source changé par Thomas Goirand <zigo at debian.org>
dpkg-source --before-build puppet-module-ceilometer-7.0.0
-dpkg-buildpackage: host architecture armhf
+dpkg-buildpackage: architecture hôte armhf
fakeroot debian/rules clean
dh clean
dh_testdir
@@ -398,16 +409,16 @@
dh_install
dh_installdocs
debian/rules override_dh_installchangelogs
-make[1]: Entering directory '/build/puppet-module-ceilometer-7.0.0'
+make[1] : on entre dans le répertoire « /build/puppet-module-ceilometer-7.0.0 »
if [ -e /build/puppet-module-ceilometer-7.0.0/debian/CHANGELOG ] ; then \
dh_installchangelogs /build/puppet-module-ceilometer-7.0.0/debian/CHANGELOG ; \
else \
dh_installchangelogs ; \
fi
-make[1]: Leaving directory '/build/puppet-module-ceilometer-7.0.0'
+make[1] : on quitte le répertoire « /build/puppet-module-ceilometer-7.0.0 »
dh_installexamples
debian/rules override_dh_installinit
-make[1]: Entering directory '/build/puppet-module-ceilometer-7.0.0'
+make[1] : on entre dans le répertoire « /build/puppet-module-ceilometer-7.0.0 »
# Create the init scripts and systemd unit files from the template
for i in `ls -1 debian/*.init.in` ; do \
MYINIT=`echo $i | sed s/.init.in//` ; \
@@ -415,13 +426,13 @@
cat /usr/share/openstack-pkg-tools/init-script-template >>$MYINIT.init ; \
pkgos-gen-systemd-unit $i ; \
done
-ls: cannot access 'debian/*.init.in': No such file or directory
+ls: impossible d'accéder à 'debian/*.init.in': Aucun fichier ou dossier de ce type
# If there's an upstart.in file, use that one instead of the generated one
for i in `ls -1 debian/*.upstart.in` ; do \
MYPKG=`echo $i | sed s/.upstart.in//` ; \
cp $MYPKG.upstart.in $MYPKG.upstart ; \
done
-ls: cannot access 'debian/*.upstart.in': No such file or directory
+ls: impossible d'accéder à 'debian/*.upstart.in': Aucun fichier ou dossier de ce type
# Generate the upstart job if there's no already existing .upstart.in
for i in `ls debian/*.init.in` ; do \
MYINIT=`echo $i | sed s/.init.in/.upstart.in/` ; \
@@ -429,13 +440,13 @@
pkgos-gen-upstart-job $i ; \
fi \
done
-ls: cannot access 'debian/*.init.in': No such file or directory
+ls: impossible d'accéder à 'debian/*.init.in': Aucun fichier ou dossier de ce type
# If there's a service.in file, use that one instead of the generated one
for i in `ls -1 debian/*.service.in`; do \
MYPKG=`echo $i | sed s/.service.in//` ; \
cp $MYPKG.service.in $MYPKG.service ; \
done
-ls: cannot access 'debian/*.service.in': No such file or directory
+ls: impossible d'accéder à 'debian/*.service.in': Aucun fichier ou dossier de ce type
# Generate the systemd unit if there's no already existing .service.in
for i in `ls debian/*.init.in` ; do \
MYINIT=`echo $i | sed s/.init.in/.service.in/` ; \
@@ -443,40 +454,43 @@
pkgos-gen-systemd-unit $i ; \
fi \
done
-ls: cannot access 'debian/*.init.in': No such file or directory
+ls: impossible d'accéder à 'debian/*.init.in': Aucun fichier ou dossier de ce type
dh_installinit --error-handler=true
-make[1]: Leaving directory '/build/puppet-module-ceilometer-7.0.0'
+make[1] : on quitte le répertoire « /build/puppet-module-ceilometer-7.0.0 »
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_installdeb
debian/rules override_dh_gencontrol
-make[1]: Entering directory '/build/puppet-module-ceilometer-7.0.0'
+make[1] : on entre dans le répertoire « /build/puppet-module-ceilometer-7.0.0 »
if dpkg-vendor --derives-from ubuntu ; then \
dh_gencontrol -- -T/build/puppet-module-ceilometer-7.0.0/debian/ubuntu_control_vars ; \
else \
dh_gencontrol -- -T/build/puppet-module-ceilometer-7.0.0/debian/debian_control_vars ; \
fi
-dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-make[1]: Leaving directory '/build/puppet-module-ceilometer-7.0.0'
+dpkg-gencontrol: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
+make[1] : on quitte le répertoire « /build/puppet-module-ceilometer-7.0.0 »
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'puppet-module-ceilometer' in '../puppet-module-ceilometer_7.0.0-1_all.deb'.
+dpkg-deb : construction du paquet « puppet-module-ceilometer » dans « ../puppet-module-ceilometer_7.0.0-1_all.deb ».
dpkg-genbuildinfo >../puppet-module-ceilometer_7.0.0-1_armhf.buildinfo
dpkg-distaddfile puppet-module-ceilometer_7.0.0-1_armhf.buildinfo admin extra
-dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
+dpkg-distaddfile: avertissement: Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFS
dpkg-genchanges -b >../puppet-module-ceilometer_7.0.0-1_armhf.changes
-dpkg-genchanges: binary-only upload (no source code included)
+dpkg-genchanges: envoi des binaires seulement (le code source n'est pas inclus)
dpkg-source --after-build puppet-module-ceilometer-7.0.0
-dpkg-buildpackage: binary-only upload (no source included)
+dpkg-buildpackage: envoi d'un binaire seulement (aucune inclusion de code source)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/16925/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/16925/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/9300 and its subdirectories
-I: Current time: Wed Apr 6 11:07:58 GMT+12 2016
-I: pbuilder-time-stamp: 1459984078
+I: removing directory /srv/workspace/pbuilder/16925 and its subdirectories
+I: Current time: jeudi 7 avril 2016, 13:12:52 (UTC+1400)
+I: pbuilder-time-stamp: 1459984372
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/logdiffs/testing/armhf/puppet-module-ceilometer_7.0.0-1.diff: 82.9% -- replaced with /var/lib/jenkins/userContent/reproducible/logdiffs/testing/armhf/puppet-module-ceilometer_7.0.0-1.diff.gz
b2/build.log: 80.4%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 79.4%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/logs/testing/armhf/puppet-module-ceilometer_7.0.0-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-FDW3RIPU/tmp.4LqcuOK8kV
+ mv /srv/reproducible-results/rbuild-debian-FDW3RIPU/tmp.4LqcuOK8kV /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/puppet-module-ceilometer_7.0.0-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/puppet-module-ceilometer_7.0.0-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-FDW3RIPU
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-FDW3RIPU/tmp.dUyGbTqakH
+ echo
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/puppet-module-ceilometer_7.0.0-1.rbuild.log
+ local TIMEOUT=120m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-FDW3RIPU -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-FDW3RIPU/dbd-tmp-eElClWI
++ schroot --directory /srv/reproducible-results/rbuild-debian-FDW3RIPU -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 51'
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ echo diffoscope 51
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ tee -a /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/puppet-module-ceilometer_7.0.0-1.rbuild.log
++ date -u
+ echo 'Wed Apr 6 23:13:00 UTC 2016 - diffoscope 51 will be used to compare the two builds:'
Wed Apr 6 23:13:00 UTC 2016 - diffoscope 51 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-FDW3RIPU -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-FDW3RIPU/dbd-tmp-eElClWI ; diffoscope --html /srv/reproducible-results/rbuild-debian-FDW3RIPU/puppet-module-ceilometer_7.0.0-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-FDW3RIPU/puppet-module-ceilometer_7.0.0-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-FDW3RIPU/b1/puppet-module-ceilometer_7.0.0-1_armhf.buildinfo /srv/reproducible-results/rbuild-debian-FDW3RIPU/b2/puppet-module-ceilometer_7.0.0-1_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-FDW3RIPU/tmp.dUyGbTqakH
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _
_ __ _ _ _ __ _ __ ___| |_ _ __ ___ ___ __| |_ _| | ___
| '_ \| | | | '_ \| '_ \ / _ \ __|____| '_ ` _ \ / _ \ / _` | | | | |/ _ \
| |_) | |_| | |_) | |_) | __/ ||_____| | | | | | (_) | (_| | |_| | | __/
| .__/ \__,_| .__/| .__/ \___|\__| |_| |_| |_|\___/ \__,_|\__,_|_|\___|
|_| |_| |_|
_ _ _
___ ___(_) | ___ _ __ ___ ___| |_ ___ _ __
_____ / __/ _ \ | |/ _ \| '_ ` _ \ / _ \ __/ _ \ '__|
|_____| (_| __/ | | (_) | | | | | | __/ || __/ |
\___\___|_|_|\___/|_| |_| |_|\___|\__\___|_|
diffoscope 51 found no differences in the changes files, and a .buildinfo file also exists.
puppet-module-ceilometer from testing built successfully and reproducibly on armhf.
INFO: Starting at 2016-04-06 23:13:02.594559
INFO: Finished at 2016-04-06 23:13:02.604298, took: 0:00:00.009748
Wed Apr 6 23:13:02 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/rb-pkg/testing/armhf/puppet-module-ceilometer.html
Wed Apr 6 23:13:02 UTC 2016 - total duration: 0h 7m 48s.
/var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/puppet-module-ceilometer_7.0.0-1.rbuild.log: 75.6% -- replaced with /var/lib/jenkins/userContent/reproducible/rbuild/testing/armhf/puppet-module-ceilometer_7.0.0-1.rbuild.log.gz
INFO: Starting at 2016-04-06 23:13:02.760738
INFO: Finished at 2016-04-06 23:13:02.770465, took: 0:00:00.009735
Wed 6 Apr 23:13:02 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-KF0wYds5, which will now be removed.
FATAL: GC overhead limit exceeded
java.lang.OutOfMemoryError: GC overhead limit exceeded
More information about the Qa-jenkins-scm
mailing list