[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_16 #40901
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Jul 16 07:30:17 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_amd64_16/40901/>
------------------------------------------
[...truncated 1966 lines...]
+Préparation du dépaquetage de .../libfile-stripnondeterminism-perl_0.019-1_all.deb ...
+Dépaquetage de libfile-stripnondeterminism-perl (0.019-1) ...
+Sélection du paquet libtimedate-perl précédemment désélectionné.
+Préparation du dépaquetage de .../libtimedate-perl_2.3000-2_all.deb ...
+Dépaquetage de libtimedate-perl (2.3000-2) ...
+Sélection du paquet dh-strip-nondeterminism précédemment désélectionné.
+Préparation du dépaquetage de .../dh-strip-nondeterminism_0.019-1_all.deb ...
+Dépaquetage de dh-strip-nondeterminism (0.019-1) ...
+Sélection du paquet libtool précédemment désélectionné.
+Préparation du dépaquetage de .../libtool_2.4.6-0.1_all.deb ...
+Dépaquetage de libtool (2.4.6-0.1) ...
+Sélection du paquet dh-autoreconf précédemment désélectionné.
+Préparation du dépaquetage de .../dh-autoreconf_12_all.deb ...
+Dépaquetage de dh-autoreconf (12) ...
+Sélection du paquet debhelper précédemment désélectionné.
+Préparation du dépaquetage de .../debhelper_9.20160709_all.deb ...
+Dépaquetage de debhelper (9.20160709) ...
+Traitement des actions différées (« triggers ») pour libc-bin (2.23-1) ...
+Paramétrage de libicu55:amd64 (55.1-7) ...
+Paramétrage de libarchive-zip-perl (1.57-1) ...
+Paramétrage de libtimedate-perl (2.3000-2) ...
+Paramétrage de libsigsegv2:amd64 (2.10-5) ...
+Paramétrage de groff-base (1.22.3-8) ...
+Paramétrage de gettext-base (0.19.8.1-1) ...
+Paramétrage de libpipeline1:amd64 (1.4.1-2) ...
+Paramétrage de m4 (1.4.17-5) ...
+Paramétrage de libbsd0:amd64 (0.8.3-1) ...
+Paramétrage de libxml2:amd64 (2.9.3+dfsg1-1.2) ...
+Paramétrage de libmagic1:amd64 (1:5.28-2) ...
+Paramétrage de autotools-dev (20160430.1) ...
+Paramétrage de libunistring0:amd64 (0.9.6+really0.9.3-0.1) ...
+Paramétrage de libffi6:amd64 (3.2.1-4) ...
+Paramétrage de bsdmainutils (9.0.10) ...
+update-alternatives: utilisation de « /usr/bin/bsd-write » pour fournir « /usr/bin/write » (write) en mode automatique
+update-alternatives: utilisation de « /usr/bin/bsd-from » pour fournir « /usr/bin/from » (from) en mode automatique
+Paramétrage de autopoint (0.19.8.1-1) ...
+Paramétrage de libfile-stripnondeterminism-perl (0.019-1) ...
+Paramétrage de libglib2.0-0:amd64 (2.48.1-2) ...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-2) ...
-Setting up libcroco3:amd64 (0.6.11-1) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Paramétrage de autoconf (2.69-10) ...
+Paramétrage de file (1:5.28-2) ...
+Paramétrage de libcroco3:amd64 (0.6.11-1) ...
+Paramétrage de automake (1:1.15-4) ...
+update-alternatives: utilisation de « /usr/bin/automake-1.15 » pour fournir « /usr/bin/automake » (automake) en mode automatique
+Paramétrage de man-db (2.7.5-1) ...
Building database of manual pages ...
-Setting up libtool (2.4.6-0.1) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.19) ...
-Setting up dh-strip-nondeterminism (0.019-1) ...
-Setting up debhelper (9.20160709) ...
-Setting up dh-autoreconf (12) ...
-Processing triggers for libc-bin (2.23-1) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Paramétrage de libtool (2.4.6-0.1) ...
+Paramétrage de gettext (0.19.8.1-1) ...
+Paramétrage de intltool-debian (0.35.0+20060710.4) ...
+Paramétrage de po-debconf (1.0.19) ...
+Paramétrage de dh-strip-nondeterminism (0.019-1) ...
+Paramétrage de debhelper (9.20160709) ...
+Paramétrage de dh-autoreconf (12) ...
+Traitement des actions différées (« triggers ») pour libc-bin (2.23-1) ...
+Lecture des listes de paquets...
+Construction de l'arbre des dépendances...
+Lecture des informations d'état...
+Lecture de l'information d'état étendu...
+Initialisation de l'état des paquets...
+Écriture de l'information d'état étendu...
+Construction de la base de données des étiquettes...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lecture des listes de paquets…
+Construction de l'arbre des dépendances…
+Lecture des informations d'état…
fakeroot is already the newest version (1.21-1).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
I: Copying source file
I: copying [libpod-constants-perl_0.19-1.dsc]
I: copying [./libpod-constants-perl_0.19.orig.tar.gz]
I: copying [./libpod-constants-perl_0.19-1.debian.tar.xz]
I: Extracting source
gpgv: keyblock resource `/root/.gnupg/trustedkeys.gpg': file open error
-gpgv: Signature made Fri Jul 15 08:33:11 2016 GMT+12 using RSA key ID 9883C97C
+gpgv: Signature made sam 16 jui 2016 10:33:11 GMT-14 using RSA key ID 9883C97C
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on ./libpod-constants-perl_0.19-1.dsc
dpkg-source: info: extracting libpod-constants-perl in libpod-constants-perl-0.19
dpkg-source: info: unpacking libpod-constants-perl_0.19.orig.tar.gz
dpkg-source: info: unpacking libpod-constants-perl_0.19-1.debian.tar.xz
I: Building the package
-I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=amd64 -rfakeroot
+W: no hooks of type A found -- ignoring
+I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=amd64 -rfakeroot
dpkg-buildpackage: info: source package libpod-constants-perl
dpkg-buildpackage: info: source version 0.19-1
dpkg-buildpackage: info: source distribution unstable
@@ -259,13 +271,13 @@
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j1
-make[1]: Entering directory '/build/libpod-constants-perl-0.19'
+make[1] : on entre dans le répertoire « /build/libpod-constants-perl-0.19 »
cp lib/Pod/Constants.pm blib/lib/Pod/Constants.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build/libpod-constants-perl-0.19'
+make[1] : on quitte le répertoire « /build/libpod-constants-perl-0.19 »
dh_auto_test
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build/libpod-constants-perl-0.19'
+make[1] : on entre dans le répertoire « /build/libpod-constants-perl-0.19 »
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/01-constants.t ..
1..20
@@ -355,20 +367,20 @@
ok 20 - Pod::Constants::remove_hook
ok
All tests successful.
-Files=1, Tests=20, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.13 cusr 0.00 csys = 0.18 CPU)
+Files=1, Tests=20, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.24 cusr 0.02 csys = 0.30 CPU)
Result: PASS
-make[1]: Leaving directory '/build/libpod-constants-perl-0.19'
+make[1] : on quitte le répertoire « /build/libpod-constants-perl-0.19 »
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
make -j1 install DESTDIR=/build/libpod-constants-perl-0.19/debian/libpod-constants-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build/libpod-constants-perl-0.19'
+make[1] : on entre dans le répertoire « /build/libpod-constants-perl-0.19 »
Manifying 1 pod document
Installing /build/libpod-constants-perl-0.19/debian/libpod-constants-perl/usr/share/perl5/Pod/Constants.pm
Installing /build/libpod-constants-perl-0.19/debian/libpod-constants-perl/usr/share/man/man3/Pod::Constants.3pm
-make[1]: Leaving directory '/build/libpod-constants-perl-0.19'
+make[1] : on quitte le répertoire « /build/libpod-constants-perl-0.19 »
dh_installdocs
dh_installchangelogs
dh_installman
@@ -390,6 +402,9 @@
dpkg-source --after-build libpod-constants-perl-0.19
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/31332/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/31332/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
@@ -397,6 +412,6 @@
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/32498 and its subdirectories
-I: Current time: Fri Aug 18 01:47:42 GMT+12 2017
-I: pbuilder-time-stamp: 1503064062
+I: removing directory /srv/workspace/pbuilder/31332 and its subdirectories
+I: Current time: samedi 16 juillet 2016, 21:25:44 (UTC+1400)
+I: pbuilder-time-stamp: 1468653944
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libpod-constants-perl_0.19-1.diff: 81.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/libpod-constants-perl_0.19-1.diff.gz
b2/build.log: 76.1%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 74.9%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/libpod-constants-perl_0.19-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-NYN9bvNB/tmp.0WHM8sHaot
+ mv /srv/reproducible-results/rbuild-debian-NYN9bvNB/tmp.0WHM8sHaot /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libpod-constants-perl_0.19-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libpod-constants-perl_0.19-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-NYN9bvNB
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-NYN9bvNB/tmp.pV1d89W1Iy
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-NYN9bvNB -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-NYN9bvNB/dbd-tmp-FaNfckd
++ schroot --directory /srv/reproducible-results/rbuild-debian-NYN9bvNB -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 54'
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ echo diffoscope 54
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 54 will be used to compare the two builds:'
+ _log I: 'diffoscope 54 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
++ date -u
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libpod-constants-perl_0.19-1.rbuild.log
+ echo -e 'Sat Jul 16 07:25:21 UTC 2016 I: diffoscope 54 will be used to compare the two builds:'
Sat Jul 16 07:25:21 UTC 2016 I: diffoscope 54 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-NYN9bvNB -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-NYN9bvNB/dbd-tmp-FaNfckd ; diffoscope --html /srv/reproducible-results/rbuild-debian-NYN9bvNB/libpod-constants-perl_0.19-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-NYN9bvNB/libpod-constants-perl_0.19-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-NYN9bvNB/b1/libpod-constants-perl_0.19-1_amd64.buildinfo /srv/reproducible-results/rbuild-debian-NYN9bvNB/b2/libpod-constants-perl_0.19-1_amd64.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-NYN9bvNB/tmp.pV1d89W1Iy
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _
| (_) |__ _ __ ___ __| | ___ ___ _ __ ___| |_ __ _ _ __ | |_ ___
| | | '_ \| '_ \ / _ \ / _` |_____ / __/ _ \| '_ \/ __| __/ _` | '_ \| __/ __|
| | | |_) | |_) | (_) | (_| |_____| (_| (_) | | | \__ \ || (_| | | | | |_\__ \
|_|_|_.__/| .__/ \___/ \__,_| \___\___/|_| |_|___/\__\__,_|_| |_|\__|___/
|_|
_
_ __ ___ _ __| |
_____| '_ \ / _ \ '__| |
|_____| |_) | __/ | | |
| .__/ \___|_| |_|
|_|
Sat Jul 16 07:25:23 UTC 2016 I: diffoscope 54 found no differences in the changes files, and a .buildinfo file also exists.
Sat Jul 16 07:25:23 UTC 2016 I: libpod-constants-perl from unstable built successfully and reproducibly on amd64.
INFO: Starting at 2016-07-16 07:25:23.393040
INFO: Finished at 2016-07-16 07:25:23.438913, took: 0:00:00.045885
Sat Jul 16 07:25:23 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/amd64/libpod-constants-perl.html
Sat Jul 16 07:25:23 UTC 2016 - total duration: 0h 2m 4s.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libpod-constants-perl_0.19-1.rbuild.log: 70.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/libpod-constants-perl_0.19-1.rbuild.log.gz
INFO: Starting at 2016-07-16 07:25:23.636714
INFO: Finished at 2016-07-16 07:25:23.691039, took: 0:00:00.054337
Sat 16 Jul 07:25:23 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-nmegnX6l, which will now be removed.
FATAL: GC overhead limit exceeded
java.lang.OutOfMemoryError: GC overhead limit exceeded
More information about the Qa-jenkins-scm
mailing list