[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_amd64_11 #46172
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Aug 6 08:37:17 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_amd64_11/46172/>
------------------------------------------
[...truncated 13025 lines...]
+make[3]: rien à faire pour « check ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/picfile »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/align »
+make[3]: rien à faire pour « check ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/align »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/sameprop »
+make[3]: rien à faire pour « check ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/sameprop »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/importshp »
+make[3]: rien à faire pour « check ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/importshp »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/asciifile »
+make[3]: rien à faire pour « check ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/asciifile »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/list »
+make[3]: rien à faire pour « check ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/list »
+make[2] : on quitte le répertoire « /build/librecad-2.0.9/plugins »
cd tools/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/tools/tools.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile check
-make[2]: Entering directory '/build/librecad-2.0.9/tools'
+make[2] : on entre dans le répertoire « /build/librecad-2.0.9/tools »
cd ttf2lff/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/tools/ttf2lff/ttf2lff.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile check
-make[3]: Entering directory '/build/librecad-2.0.9/tools/ttf2lff'
-make[3]: Nothing to be done for 'check'.
-make[3]: Leaving directory '/build/librecad-2.0.9/tools/ttf2lff'
-make[2]: Leaving directory '/build/librecad-2.0.9/tools'
-make[1]: Leaving directory '/build/librecad-2.0.9'
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/tools/ttf2lff »
+make[3]: rien à faire pour « check ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/tools/ttf2lff »
+make[2] : on quitte le répertoire « /build/librecad-2.0.9/tools »
+make[1] : on quitte le répertoire « /build/librecad-2.0.9 »
fakeroot debian/rules binary
dh binary --parallel
dh_testroot -O--parallel
dh_prep -O--parallel
dh_auto_install -O--parallel
- make -j18 install DESTDIR=/build/librecad-2.0.9/debian/tmp AM_UPDATE_INFO_DIR=no INSTALL_ROOT=/build/librecad-2.0.9/debian/tmp
-make[1]: Entering directory '/build/librecad-2.0.9'
+ make -j17 install DESTDIR=/build/librecad-2.0.9/debian/tmp AM_UPDATE_INFO_DIR=no INSTALL_ROOT=/build/librecad-2.0.9/debian/tmp
+make[1] : on entre dans le répertoire « /build/librecad-2.0.9 »
cd libraries/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/libraries/libraries.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[2]: Entering directory '/build/librecad-2.0.9/libraries'
+make[2] : on entre dans le répertoire « /build/librecad-2.0.9/libraries »
cd jwwlib/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/libraries/jwwlib/jwwlib.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
cd libdxfrw/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/libraries/libdxfrw/libdxfrw.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[3]: Entering directory '/build/librecad-2.0.9/libraries/libdxfrw'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/libraries/libdxfrw'
-make[3]: Entering directory '/build/librecad-2.0.9/libraries/jwwlib'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/libraries/jwwlib'
-make[2]: Leaving directory '/build/librecad-2.0.9/libraries'
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/libraries/libdxfrw »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/libraries/libdxfrw »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/libraries/jwwlib »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/libraries/jwwlib »
+make[2] : on quitte le répertoire « /build/librecad-2.0.9/libraries »
cd librecad/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/librecad/librecad.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[2]: Entering directory '/build/librecad-2.0.9/librecad'
+make[2] : on entre dans le répertoire « /build/librecad-2.0.9/librecad »
cd src/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/librecad/src/src.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[3]: Entering directory '/build/librecad-2.0.9/librecad/src'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/librecad/src'
-make[2]: Leaving directory '/build/librecad-2.0.9/librecad'
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/librecad/src »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/librecad/src »
+make[2] : on quitte le répertoire « /build/librecad-2.0.9/librecad »
cd plugins/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/plugins.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[2]: Entering directory '/build/librecad-2.0.9/plugins'
-cd align/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/align/align.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
+make[2] : on entre dans le répertoire « /build/librecad-2.0.9/plugins »
cd asciifile/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/asciifile/asciifile.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-cd sample/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/sample/sample.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
+cd sameprop/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/sameprop/sameprop.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
cd list/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/list/list.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-cd plotequation/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/plotequation/plotequation.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
+cd sample/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/sample/sample.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
cd importshp/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/importshp/importshp.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
cd picfile/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/picfile/picfile.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-cd sameprop/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/sameprop/sameprop.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/align'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/align'
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/asciifile'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/asciifile'
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/sample'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/sample'
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/list'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/list'
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/importshp'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/importshp'
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/picfile'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/picfile'
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/sameprop'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/sameprop'
-make[3]: Entering directory '/build/librecad-2.0.9/plugins/plotequation'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/plugins/plotequation'
-make[2]: Leaving directory '/build/librecad-2.0.9/plugins'
+cd plotequation/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/plotequation/plotequation.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
+cd align/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/plugins/align/align.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/list »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/list »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/asciifile »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/asciifile »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/sameprop »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/sameprop »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/sample »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/sample »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/picfile »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/picfile »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/importshp »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/importshp »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/plotequation »
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/plugins/align »
+make[3]: rien à faire pour « install ».
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/align »
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/plugins/plotequation »
+make[2] : on quitte le répertoire « /build/librecad-2.0.9/plugins »
cd tools/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/tools/tools.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[2]: Entering directory '/build/librecad-2.0.9/tools'
+make[2] : on entre dans le répertoire « /build/librecad-2.0.9/tools »
cd ttf2lff/ && ( test -e Makefile || /usr/lib/x86_64-linux-gnu/qt5/bin/qmake /build/librecad-2.0.9/tools/ttf2lff/ttf2lff.pro -nocache 'QMAKE_CFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_RELEASE=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' 'QMAKE_CXXFLAGS_DEBUG=-g -O2 -fdebug-prefix-map=/build/librecad-2.0.9=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2' QMAKE_LFLAGS_RELEASE=-Wl,-z,relro QMAKE_LFLAGS_DEBUG=-Wl,-z,relro QMAKE_STRIP=: PREFIX=/usr -o Makefile ) && make -f Makefile install
-make[3]: Entering directory '/build/librecad-2.0.9/tools/ttf2lff'
-make[3]: Nothing to be done for 'install'.
-make[3]: Leaving directory '/build/librecad-2.0.9/tools/ttf2lff'
-make[2]: Leaving directory '/build/librecad-2.0.9/tools'
-make[1]: Leaving directory '/build/librecad-2.0.9'
+make[3] : on entre dans le répertoire « /build/librecad-2.0.9/tools/ttf2lff »
+make[3]: rien à faire pour « install ».
+make[3] : on quitte le répertoire « /build/librecad-2.0.9/tools/ttf2lff »
+make[2] : on quitte le répertoire « /build/librecad-2.0.9/tools »
+make[1] : on quitte le répertoire « /build/librecad-2.0.9 »
dh_install -O--parallel
dh_installdocs -O--parallel
dh_installchangelogs -O--parallel
@@ -3043,7 +3055,7 @@
dh_strip -O--parallel
dh_makeshlibs -O--parallel
dh_shlibdeps -O--parallel
-dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/librecad/usr/lib/librecad/liblist.so debian/librecad/usr/lib/librecad/libasciifile.so debian/librecad/usr/lib/librecad/libsameprop.so debian/librecad/usr/lib/librecad/libplotequation.so debian/librecad/usr/lib/librecad/libalign.so debian/librecad/usr/lib/librecad/libimportshp.so debian/librecad/usr/bin/librecad debian/librecad/usr/lib/librecad/libpicfile.so debian/librecad/usr/lib/librecad/libsample.so were not linked against libGL.so.1 (they use none of the library's symbols)
+dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/librecad/usr/lib/librecad/libplotequation.so debian/librecad/usr/lib/librecad/libsample.so debian/librecad/usr/lib/librecad/libalign.so debian/librecad/usr/lib/librecad/libpicfile.so debian/librecad/usr/lib/librecad/libimportshp.so debian/librecad/usr/lib/librecad/liblist.so debian/librecad/usr/lib/librecad/libsameprop.so debian/librecad/usr/bin/librecad debian/librecad/usr/lib/librecad/libasciifile.so were not linked against libGL.so.1 (they use none of the library's symbols)
dh_installdeb -O--parallel
dh_gencontrol -O--parallel
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
@@ -3061,6 +3073,9 @@
dpkg-source --after-build librecad-2.0.9
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/16577/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/16577/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
I: unmounting /sys filesystem
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
@@ -3068,6 +3083,6 @@
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/27664 and its subdirectories
-I: Current time: Fri Aug 5 20:07:53 GMT+12 2016
-I: pbuilder-time-stamp: 1470470873
+I: removing directory /srv/workspace/pbuilder/16577 and its subdirectories
+I: Current time: samedi 9 septembre 2017, 04:50:52 (UTC+1400)
+I: pbuilder-time-stamp: 1504882252
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/librecad_2.0.9-3.diff: 92.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/amd64/librecad_2.0.9-3.diff.gz
b2/build.log: 97.1%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 97.1%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/amd64/librecad_2.0.9-3.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-ZlCrkChs/tmp.DhkkVn929e
+ mv /srv/reproducible-results/rbuild-debian-ZlCrkChs/tmp.DhkkVn929e /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/librecad_2.0.9-3.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/librecad_2.0.9-3.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-ZlCrkChs
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-ZlCrkChs/tmp.ZxTH2X5MIE
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-ZlCrkChs -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-ZlCrkChs/dbd-tmp-s7PjwIo
++ schroot --directory /srv/reproducible-results/rbuild-debian-ZlCrkChs -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 56'
++ echo diffoscope 56
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 56 will be used to compare the two builds:'
+ _log I: 'diffoscope 56 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/librecad_2.0.9-3.rbuild.log
++ date -u
+ echo -e 'Sat Aug 6 08:30:59 UTC 2016 I: diffoscope 56 will be used to compare the two builds:'
Sat Aug 6 08:30:59 UTC 2016 I: diffoscope 56 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-ZlCrkChs -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-ZlCrkChs/dbd-tmp-s7PjwIo ; diffoscope --html /srv/reproducible-results/rbuild-debian-ZlCrkChs/librecad_2.0.9-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian-ZlCrkChs/librecad_2.0.9-3.diffoscope.txt /srv/reproducible-results/rbuild-debian-ZlCrkChs/b1/librecad_2.0.9-3_amd64.buildinfo /srv/reproducible-results/rbuild-debian-ZlCrkChs/b2/librecad_2.0.9-3_amd64.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-ZlCrkChs/tmp.ZxTH2X5MIE
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _
| (_) |__ _ __ ___ ___ __ _ __| |
| | | '_ \| '__/ _ \/ __/ _` |/ _` |
| | | |_) | | | __/ (_| (_| | (_| |
|_|_|_.__/|_| \___|\___\__,_|\__,_|
Sat Aug 6 08:32:23 UTC 2016 I: diffoscope 56 found no differences in the changes files, and a .buildinfo file also exists.
Sat Aug 6 08:32:23 UTC 2016 I: librecad from unstable built successfully and reproducibly on amd64.
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/librecad_2.0.9-3.rbuild.log: 97.0% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/amd64/librecad_2.0.9-3.rbuild.log.gz
INFO: Starting at 2016-08-06 08:35:20.663760
CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/amd64/librecad_2.0.9-2_amd64.buildinfo
CRITICAL: https://tests.reproducible-builds.org/debian/unstable/amd64/librecad didn't produce a buildlog, even though it has been built.
INFO: Finished at 2016-08-06 08:37:06.405495, took: 0:01:45.741766
Sat 6 Aug 08:37:11 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-zV2DqvYl, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list