[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_19 #10202
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Sep 3 23:02:36 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_armhf_19/10202/>
------------------------------------------
[...truncated 1875 lines...]
+Configurazione di libarchive-zip-perl (1.59-1)...
+Configurazione di libtimedate-perl (2.3000-2)...
+Configurazione di libsigsegv2:armhf (2.10-5)...
+Configurazione di groff-base (1.22.3-8)...
+Configurazione di gettext-base (0.19.8.1-1)...
+Configurazione di libpipeline1:armhf (1.4.1-2)...
+Configurazione di m4 (1.4.17-5)...
+Configurazione di libicu57:armhf (57.1-3)...
+Configurazione di libbsd0:armhf (0.8.3-1)...
+Configurazione di libxml2:armhf (2.9.4+dfsg1-1+b1)...
+Configurazione di libmagic-mgc (1:5.28-4)...
+Configurazione di libmagic1:armhf (1:5.28-4)...
+Elaborazione dei trigger per libc-bin (2.24-1)...
+Configurazione di autotools-dev (20160430.1)...
+Configurazione di libunistring0:armhf (0.9.6+really0.9.3-0.1)...
+Configurazione di libffi6:armhf (3.2.1-4)...
+Configurazione di bsdmainutils (9.0.10)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libfile-stripnondeterminism-perl (0.023-2)...
+Configurazione di libglib2.0-0:armhf (2.49.6-1)...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:armhf (0.6.11-1) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.28-4)...
+Configurazione di libcroco3:armhf (0.6.11-1)...
+Configurazione di automake (1:1.15-4)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-1)...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.19) ...
-Setting up dh-strip-nondeterminism (0.023-2) ...
-Setting up debhelper (9.20160814) ...
-Setting up dh-autoreconf (12) ...
-Processing triggers for libc-bin (2.24-1) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di po-debconf (1.0.19)...
+Configurazione di dh-strip-nondeterminism (0.023-2)...
+Configurazione di debhelper (9.20160814)...
+Configurazione di dh-autoreconf (12)...
+Elaborazione dei trigger per libc-bin (2.24-1)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [libimage-size-perl_3.300-1.dsc]
I: copying [./libimage-size-perl_3.300.orig.tar.gz]
I: copying [./libimage-size-perl_3.300-1.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Thu Jun 18 22:11:51 2015 GMT+12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made sab 20 giu 2015 00:11:51 GMT-14
gpgv: using RSA key BB3A68018649AA06
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./libimage-size-perl_3.300-1.dsc
dpkg-source: info: extracting libimage-size-perl in libimage-size-perl-3.300
dpkg-source: info: unpacking libimage-size-perl_3.300.orig.tar.gz
@@ -243,7 +255,8 @@
dpkg-source: info: applying imgsize-exit-code.patch
dpkg-source: info: applying hashbang.patch
I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=armhf -rfakeroot
+W: no hooks of type A found -- ignoring
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=armhf -rfakeroot
dpkg-buildpackage: info: source package libimage-size-perl
dpkg-buildpackage: info: source version 3.300-1
dpkg-buildpackage: info: source distribution unstable
@@ -269,16 +282,16 @@
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j1
-make[1]: Entering directory '/build-1st/libimage-size-perl-3.300'
+make[1]: ingresso nella directory "/build-2nd/libimage-size-perl-3.300"
cp lib/Image/Size.pm blib/lib/Image/Size.pm
cp imgsize blib/script/imgsize
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/imgsize
Manifying 1 pod document
Manifying 1 pod document
-make[1]: Leaving directory '/build-1st/libimage-size-perl-3.300'
+make[1]: uscita dalla directory "/build-2nd/libimage-size-perl-3.300"
dh_auto_test
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build-1st/libimage-size-perl-3.300'
+make[1]: ingresso nella directory "/build-2nd/libimage-size-perl-3.300"
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/all.t .....
1..23
@@ -311,23 +324,23 @@
ok 1 - Image::Magick should not be loaded until it is needed if it available
ok
All tests successful.
-Files=2, Tests=24, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.53 cusr 0.09 csys = 0.68 CPU)
+Files=2, Tests=24, 3 wallclock secs ( 0.23 usr 0.03 sys + 1.00 cusr 0.22 csys = 1.48 CPU)
Result: PASS
-make[1]: Leaving directory '/build-1st/libimage-size-perl-3.300'
+make[1]: uscita dalla directory "/build-2nd/libimage-size-perl-3.300"
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
- make -j1 install DESTDIR=/build-1st/libimage-size-perl-3.300/debian/libimage-size-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build-1st/libimage-size-perl-3.300'
+ make -j1 install DESTDIR=/build-2nd/libimage-size-perl-3.300/debian/libimage-size-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: ingresso nella directory "/build-2nd/libimage-size-perl-3.300"
Manifying 1 pod document
Manifying 1 pod document
-Installing /build-1st/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/perl5/Image/Size.pm
-Installing /build-1st/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man1/imgsize.1p
-Installing /build-1st/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man3/Image::Size.3pm
-Installing /build-1st/libimage-size-perl-3.300/debian/libimage-size-perl/usr/bin/imgsize
-make[1]: Leaving directory '/build-1st/libimage-size-perl-3.300'
+Installing /build-2nd/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/perl5/Image/Size.pm
+Installing /build-2nd/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man1/imgsize.1p
+Installing /build-2nd/libimage-size-perl-3.300/debian/libimage-size-perl/usr/share/man/man3/Image::Size.3pm
+Installing /build-2nd/libimage-size-perl-3.300/debian/libimage-size-perl/usr/bin/imgsize
+make[1]: uscita dalla directory "/build-2nd/libimage-size-perl-3.300"
dh_installdocs
dh_installchangelogs
dh_installexamples
@@ -350,12 +363,15 @@
dpkg-source --after-build libimage-size-perl-3.300
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/1283/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/1283/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/10018 and its subdirectories
-I: Current time: Sat Sep 3 10:45:18 GMT+12 2016
-I: pbuilder-time-stamp: 1472942718
+I: removing directory /srv/workspace/pbuilder/1283 and its subdirectories
+I: Current time: dom 4 set 2016, 12.51.42, GMT-14
+I: pbuilder-time-stamp: 1472943102
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libimage-size-perl_3.300-1.diff: 80.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libimage-size-perl_3.300-1.diff.gz
b2/build.log: 75.6%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 75.0%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/libimage-size-perl_3.300-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-ZRWvkGP5/tmp.FIRhkGm6jW
+ mv /srv/reproducible-results/rbuild-debian-ZRWvkGP5/tmp.FIRhkGm6jW /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libimage-size-perl_3.300-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libimage-size-perl_3.300-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-ZRWvkGP5
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-ZRWvkGP5/tmp.Qo9sn42Kmc
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-ZRWvkGP5 -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-ZRWvkGP5/dbd-tmp-xrgb4oe
++ schroot --directory /srv/reproducible-results/rbuild-debian-ZRWvkGP5 -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 59'
++ echo diffoscope 59
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 59 will be used to compare the two builds:'
+ _log I: 'diffoscope 59 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libimage-size-perl_3.300-1.rbuild.log
++ date -u
+ echo -e 'Sat Sep 3 22:51:51 UTC 2016 I: diffoscope 59 will be used to compare the two builds:'
Sat Sep 3 22:51:51 UTC 2016 I: diffoscope 59 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-ZRWvkGP5 -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-ZRWvkGP5/dbd-tmp-xrgb4oe ; diffoscope --html /srv/reproducible-results/rbuild-debian-ZRWvkGP5/libimage-size-perl_3.300-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-ZRWvkGP5/libimage-size-perl_3.300-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-ZRWvkGP5/b1/libimage-size-perl_3.300-1_armhf.buildinfo /srv/reproducible-results/rbuild-debian-ZRWvkGP5/b2/libimage-size-perl_3.300-1_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-ZRWvkGP5/tmp.Qo9sn42Kmc
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _
| (_) |__ (_)_ __ ___ __ _ __ _ ___ ___(_)_______ _ __ ___
| | | '_ \| | '_ ` _ \ / _` |/ _` |/ _ \_____/ __| |_ / _ \_____| '_ \ / _ \
| | | |_) | | | | | | | (_| | (_| | __/_____\__ \ |/ / __/_____| |_) | __/
|_|_|_.__/|_|_| |_| |_|\__,_|\__, |\___| |___/_/___\___| | .__/ \___|
|___/ |_|
_
_ __| |
| '__| |
| | | |
|_| |_|
Sat Sep 3 22:51:54 UTC 2016 I: diffoscope 59 found no differences in the changes files, and a .buildinfo file also exists.
Sat Sep 3 22:51:54 UTC 2016 I: libimage-size-perl from unstable built successfully and reproducibly on armhf.
INFO: Starting at 2016-09-03 22:51:55.297937
INFO: Finished at 2016-09-03 22:51:55.389760, took: 0:00:00.091836
Sat Sep 3 22:51:55 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/armhf/libimage-size-perl.html
Sat Sep 3 22:51:55 UTC 2016 - total duration: 0h 8m 38s.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libimage-size-perl_3.300-1.rbuild.log: 70.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libimage-size-perl_3.300-1.rbuild.log.gz
INFO: Starting at 2016-09-03 22:51:55.808256
INFO: Finished at 2016-09-03 22:51:55.911460, took: 0:00:00.103221
Sat 3 Sep 22:51:55 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-BtI7XimR, which will now be removed.
FATAL: GC overhead limit exceeded
java.lang.OutOfMemoryError: GC overhead limit exceeded
More information about the Qa-jenkins-scm
mailing list