[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_23 #9248
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sun Sep 11 12:36:19 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_armhf_23/9248/>
------------------------------------------
[...truncated 2016 lines...]
+Configurazione di libffi6:armhf (3.2.1-4)...
+Configurazione di bsdmainutils (9.0.10)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libfile-stripnondeterminism-perl (0.026-1)...
+Configurazione di libglib2.0-0:armhf (2.49.6-1)...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:armhf (0.6.11-1) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.28-4)...
+Configurazione di libcroco3:armhf (0.6.11-1)...
+Configurazione di automake (1:1.15-4)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-1)...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.19) ...
-Setting up dh-strip-nondeterminism (0.026-1) ...
-Setting up debhelper (9.20160814) ...
-Setting up dh-autoreconf (12) ...
-Processing triggers for libc-bin (2.24-2) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di po-debconf (1.0.19)...
+Configurazione di dh-strip-nondeterminism (0.026-1)...
+Configurazione di debhelper (9.20160814)...
+Configurazione di dh-autoreconf (12)...
+Elaborazione dei trigger per libc-bin (2.24-2)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [liblinux-dvb-perl_1.03-1.dsc]
I: copying [./liblinux-dvb-perl_1.03.orig.tar.gz]
I: copying [./liblinux-dvb-perl_1.03-1.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Fri Sep 11 08:53:59 2015 GMT+12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made sab 12 set 2015 10:53:59 GMT-14
gpgv: using RSA key 12973B6E72DC07B5
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./liblinux-dvb-perl_1.03-1.dsc
dpkg-source: info: extracting liblinux-dvb-perl in liblinux-dvb-perl-1.03
dpkg-source: info: unpacking liblinux-dvb-perl_1.03.orig.tar.gz
dpkg-source: info: unpacking liblinux-dvb-perl_1.03-1.debian.tar.xz
I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=armhf -rfakeroot
+W: no hooks of type A found -- ignoring
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=armhf -rfakeroot
dpkg-buildpackage: info: source package liblinux-dvb-perl
dpkg-buildpackage: info: source version 1.03-1
dpkg-buildpackage: info: source distribution unstable
@@ -265,7 +278,7 @@
dh_testdir
dh_update_autotools_config
dh_auto_configure
- perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build-1st/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build-1st/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro"
+ perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build-2nd/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build-2nd/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro"
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
@@ -313,23 +326,23 @@
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j1
-make[1]: Entering directory '/build-1st/liblinux-dvb-perl-1.03'
+make[1]: ingresso nella directory "/build-2nd/liblinux-dvb-perl-1.03"
cp DVB.pm blib/lib/Linux/DVB.pm
Running Mkbootstrap for Linux::DVB ()
chmod 644 "DVB.bs"
"/usr/bin/perl" "/usr/share/perl/5.22/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.22/ExtUtils/typemap" -typemap "typemap" DVB.xs > DVB.xsc && mv DVB.xsc DVB.c
-arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build-1st/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.03\" -DXS_VERSION=\"1.03\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.22/CORE" DVB.c
+arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build-2nd/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"1.03\" -DXS_VERSION=\"1.03\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.22/CORE" DVB.c
rm -f blib/arch/auto/Linux/DVB/DVB.so
-arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build-1st/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong DVB.o -o blib/arch/auto/Linux/DVB/DVB.so \
+arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build-2nd/liblinux-dvb-perl-1.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong DVB.o -o blib/arch/auto/Linux/DVB/DVB.so \
\
chmod 755 blib/arch/auto/Linux/DVB/DVB.so
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- DVB.bs blib/arch/auto/Linux/DVB/DVB.bs 644
Manifying 1 pod document
-make[1]: Leaving directory '/build-1st/liblinux-dvb-perl-1.03'
+make[1]: uscita dalla directory "/build-2nd/liblinux-dvb-perl-1.03"
dh_auto_test
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build-1st/liblinux-dvb-perl-1.03'
+make[1]: ingresso nella directory "/build-2nd/liblinux-dvb-perl-1.03"
Running Mkbootstrap for Linux::DVB ()
chmod 644 "DVB.bs"
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
@@ -338,29 +351,29 @@
ok 1
ok
All tests successful.
-Files=1, Tests=1, 0 wallclock secs ( 0.20 usr 0.04 sys + 0.19 cusr 0.04 csys = 0.47 CPU)
+Files=1, Tests=1, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.08 cusr 0.03 csys = 0.16 CPU)
Result: PASS
-make[1]: Leaving directory '/build-1st/liblinux-dvb-perl-1.03'
+make[1]: uscita dalla directory "/build-2nd/liblinux-dvb-perl-1.03"
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
- make -j1 install DESTDIR=/build-1st/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build-1st/liblinux-dvb-perl-1.03'
+ make -j1 install DESTDIR=/build-2nd/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: ingresso nella directory "/build-2nd/liblinux-dvb-perl-1.03"
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
-Installing /build-1st/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Linux/DVB/DVB.so
-Installing /build-1st/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Linux/DVB.pm
-Installing /build-1st/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/share/man/man3/Linux::DVB.3pm
-make[1]: Leaving directory '/build-1st/liblinux-dvb-perl-1.03'
+Installing /build-2nd/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/auto/Linux/DVB/DVB.so
+Installing /build-2nd/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/lib/arm-linux-gnueabihf/perl5/5.22/Linux/DVB.pm
+Installing /build-2nd/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/share/man/man3/Linux::DVB.3pm
+make[1]: uscita dalla directory "/build-2nd/liblinux-dvb-perl-1.03"
dh_installdocs
dh_installchangelogs
debian/rules override_dh_installexamples
-make[1]: Entering directory '/build-1st/liblinux-dvb-perl-1.03'
+make[1]: ingresso nella directory "/build-2nd/liblinux-dvb-perl-1.03"
dh_installexamples
-sed -i '1s|^#!.*perl.*$|#!/usr/bin/perl|' /build-1st/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/share/doc/liblinux-dvb-perl/examples/*
-make[1]: Leaving directory '/build-1st/liblinux-dvb-perl-1.03'
+sed -i '1s|^#!.*perl.*$|#!/usr/bin/perl|' /build-2nd/liblinux-dvb-perl-1.03/debian/liblinux-dvb-perl/usr/share/doc/liblinux-dvb-perl/examples/*
+make[1]: uscita dalla directory "/build-2nd/liblinux-dvb-perl-1.03"
dh_installman
dh_perl
dh_link
@@ -385,12 +398,15 @@
dpkg-source --after-build liblinux-dvb-perl-1.03
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/22712/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/22712/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/3932 and its subdirectories
-I: Current time: Sun Sep 11 00:29:13 GMT+12 2016
-I: pbuilder-time-stamp: 1473596953
+I: removing directory /srv/workspace/pbuilder/22712 and its subdirectories
+I: Current time: lun 12 set 2016, 02.31.04, GMT-14
+I: pbuilder-time-stamp: 1473597064
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/liblinux-dvb-perl_1.03-1.diff: 80.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/liblinux-dvb-perl_1.03-1.diff.gz
b2/build.log: 74.7%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 74.1%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/liblinux-dvb-perl_1.03-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-xYKMWMni/tmp.FXIa1hQjrz
+ mv /srv/reproducible-results/rbuild-debian-xYKMWMni/tmp.FXIa1hQjrz /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/liblinux-dvb-perl_1.03-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/liblinux-dvb-perl_1.03-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-xYKMWMni
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-xYKMWMni/tmp.e2kUkL1onz
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-xYKMWMni -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-xYKMWMni/dbd-tmp-vGuTcOc
++ schroot --directory /srv/reproducible-results/rbuild-debian-xYKMWMni -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 59'
++ echo diffoscope 59
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 59 will be used to compare the two builds:'
+ _log I: 'diffoscope 59 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
++ date -u
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/liblinux-dvb-perl_1.03-1.rbuild.log
+ echo -e 'Sun Sep 11 12:31:12 UTC 2016 I: diffoscope 59 will be used to compare the two builds:'
Sun Sep 11 12:31:12 UTC 2016 I: diffoscope 59 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-xYKMWMni -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-xYKMWMni/dbd-tmp-vGuTcOc ; diffoscope --html /srv/reproducible-results/rbuild-debian-xYKMWMni/liblinux-dvb-perl_1.03-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-xYKMWMni/liblinux-dvb-perl_1.03-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-xYKMWMni/b1/liblinux-dvb-perl_1.03-1_armhf.buildinfo /srv/reproducible-results/rbuild-debian-xYKMWMni/b2/liblinux-dvb-perl_1.03-1_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-xYKMWMni/tmp.e2kUkL1onz
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _ _ _
| (_) |__ | (_)_ __ _ ___ __ __| |_ _| |__ _ __ ___ _ __| |
| | | '_ \| | | '_ \| | | \ \/ /____ / _` \ \ / / '_ \ _____| '_ \ / _ \ '__| |
| | | |_) | | | | | | |_| |> <_____| (_| |\ V /| |_) |_____| |_) | __/ | | |
|_|_|_.__/|_|_|_| |_|\__,_/_/\_\ \__,_| \_/ |_.__/ | .__/ \___|_| |_|
|_|
Sun Sep 11 12:31:15 UTC 2016 I: diffoscope 59 found no differences in the changes files, and a .buildinfo file also exists.
Sun Sep 11 12:31:15 UTC 2016 I: liblinux-dvb-perl from unstable built successfully and reproducibly on armhf.
Error: database is locked
Error: database is locked
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/liblinux-dvb-perl_1.03-1.rbuild.log: 70.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/liblinux-dvb-perl_1.03-1.rbuild.log.gz
INFO: Starting at 2016-09-11 12:35:16.859692
INFO: Finished at 2016-09-11 12:36:19.229641, took: 0:01:02.369960
Sun 11 Sep 12:36:19 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-nN1G2aMQ, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list