[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_i386_14 #15772
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Thu Sep 15 07:36:24 UTC 2016
See <https://jenkins.debian.net/job/reproducible_builder_i386_14/15772/>
------------------------------------------
[...truncated 2955 lines...]
+libxcb1:i386 (1.11.1-1.1) wird eingerichtet ...
+libmatio4:i386 (1.5.8-1) wird eingerichtet ...
+libtool (2.4.6-2) wird eingerichtet ...
+libfontconfig1:i386 (2.11.0-6.7) wird eingerichtet ...
+gettext (0.19.8.1-1) wird eingerichtet ...
+libx11-6:i386 (2:1.6.3-1) wird eingerichtet ...
+libmatio-dev:i386 (1.5.8-1) wird eingerichtet ...
+intltool-debian (0.35.0+20060710.4) wird eingerichtet ...
+libxpm4:i386 (1:3.5.11-1+b1) wird eingerichtet ...
+po-debconf (1.0.19) wird eingerichtet ...
+libgd3:i386 (2.2.3-3+b1) wird eingerichtet ...
+pdl (1:2.016-4+b1) wird eingerichtet ...
+dh-autoreconf (12) wird eingerichtet ...
+debhelper (10) wird eingerichtet ...
+dh-strip-nondeterminism (0.028-1) wird eingerichtet ...
+Trigger für libc-bin (2.24-2) werden verarbeitet ...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
+Lesen der erweiterten Statusinformationen...
+Initialisieren des Paketstatus'...
+Schreiben der erweiterten Statusinformationen...
+Erzeugen der Tag-Datenbank...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
I: Copying source file
I: copying [libpdl-io-matlab-perl_0.005-2.dsc]
I: copying [./libpdl-io-matlab-perl_0.005.orig.tar.gz]
I: copying [./libpdl-io-matlab-perl_0.005-2.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Thu Jun 23 23:21:23 2016 GMT+12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Allgemeiner Fehler
+gpgv: Signature made Sam 25 Jun 2016 01:21:23 GMT-14
gpgv: using RSA key 6750F10AE88D4AF1
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Kein öffentlicher Schlüssel
dpkg-source: warning: failed to verify signature on ./libpdl-io-matlab-perl_0.005-2.dsc
dpkg-source: info: extracting libpdl-io-matlab-perl in libpdl-io-matlab-perl-0.005
dpkg-source: info: unpacking libpdl-io-matlab-perl_0.005.orig.tar.gz
@@ -437,7 +449,8 @@
dpkg-source: info: applying 0004-Make-now-knows-about-a-source-dependency-and-can-reb.patch
dpkg-source: info: applying 0005-removed-POD-coverage-tests.-these-fail.-I-notified-u.patch
I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=i386 -rfakeroot
+W: no hooks of type A found -- ignoring
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-identifier=i386 -rfakeroot
dpkg-buildpackage: info: source package libpdl-io-matlab-perl
dpkg-buildpackage: info: source version 0.005-2
dpkg-buildpackage: info: source distribution unstable
@@ -454,7 +467,7 @@
dh_testdir
dh_update_autotools_config
dh_auto_configure
- perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build-1st/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build-1st/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -fPIE -pie -Wl,-z,relro -Wl,-z,now"
+ perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build-2nd/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build-2nd/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -fPIE -pie -Wl,-z,relro -Wl,-z,now"
Checking if your kit is complete...
Warning: the following files are missing in your kit:
matio-1.5.0/visual_studio/libmatio
@@ -464,30 +477,29 @@
Writing Makefile for PDL::IO::Matlab
dh_auto_build
make -j1
-make[1]: Entering directory '/build-1st/libpdl-io-matlab-perl-0.005'
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird betreten
"/usr/bin/perl" "-I/usr/lib/i386-linux-gnu/perl5/5.22" "-MPDL::PP qw/PDL::IO::Matlab PDL::IO::Matlab Matlab/" matlab.pd
Useless use of a constant ("\n=cut\n") in void context at matlab.pd line 617.
cp Matlab.pm blib/lib/PDL/IO/Matlab.pm
Running Mkbootstrap for PDL::IO::Matlab ()
chmod 644 "Matlab.bs"
-touch Matlab.xs
"/usr/bin/perl" "/usr/share/perl/5.22/ExtUtils/xsubpp" -typemap "/usr/share/perl/5.22/ExtUtils/typemap" -typemap "/usr/lib/i386-linux-gnu/perl5/5.22/PDL/Core/typemap.pdl" -typemap "typemap" Matlab.xs > Matlab.xsc && mv Matlab.xsc Matlab.c
-i686-linux-gnu-gcc -c "-I/usr/lib/i386-linux-gnu/perl5/5.22/PDL/Core" -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build-1st/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.005\" -DXS_VERSION=\"0.005\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.22/CORE" Matlab.c
-Matlab.xs: In function 'boot_PDL__IO__Matlab':
-Matlab.xs:348:40: warning: format '%d' expects argument of type 'int', but argument 3 has type 'I32 {aka long int}' [-Wformat=]
+i686-linux-gnu-gcc -c "-I/usr/lib/i386-linux-gnu/perl5/5.22/PDL/Core" -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fdebug-prefix-map=/build-2nd/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.005\" -DXS_VERSION=\"0.005\" -fPIC "-I/usr/lib/i386-linux-gnu/perl/5.22/CORE" Matlab.c
+Matlab.xs: In function ‘boot_PDL__IO__Matlab’:
+Matlab.xs:348:40: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘I32 {aka long int}’ [-Wformat=]
Perl_croak(aTHX_ "[PDL->Version: %d PDL_CORE_VERSION: %d XS_VERSION: %s] PDL::IO::Matlab needs to be recompiled against the newly installed PDL", PDL->Version, PDL_CORE_VERSION, XS_VERSION);
^
rm -f blib/arch/auto/PDL/IO/Matlab/Matlab.so
-i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build-1st/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -fPIE -pie -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Matlab.o -o blib/arch/auto/PDL/IO/Matlab/Matlab.so \
+i686-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build-2nd/libpdl-io-matlab-perl-0.005=. -fPIE -fstack-protector-strong -Wformat -Werror=format-security -fPIE -pie -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Matlab.o -o blib/arch/auto/PDL/IO/Matlab/Matlab.so \
-lmatio \
chmod 755 blib/arch/auto/PDL/IO/Matlab/Matlab.so
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Matlab.bs blib/arch/auto/PDL/IO/Matlab/Matlab.bs 644
Manifying 1 pod document
-make[1]: Leaving directory '/build-1st/libpdl-io-matlab-perl-0.005'
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird verlassen
dh_auto_test
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build-1st/libpdl-io-matlab-perl-0.005'
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird betreten
Running Mkbootstrap for PDL::IO::Matlab ()
chmod 644 "Matlab.bs"
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
@@ -519,22 +531,22 @@
t/manifest.t .. skipped: Author tests not required for installation
t/pod.t ....... skipped: Test::Pod 1.22 required for testing POD
All tests successful.
-Files=4, Tests=18, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.42 cusr 0.04 csys = 0.50 CPU)
+Files=4, Tests=18, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.73 cusr 0.04 csys = 0.83 CPU)
Result: PASS
-make[1]: Leaving directory '/build-1st/libpdl-io-matlab-perl-0.005'
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird verlassen
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
- make -j1 install DESTDIR=/build-1st/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build-1st/libpdl-io-matlab-perl-0.005'
+ make -j1 install DESTDIR=/build-2nd/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird betreten
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
-Installing /build-1st/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl/usr/lib/i386-linux-gnu/perl5/5.22/auto/PDL/IO/Matlab/Matlab.so
-Installing /build-1st/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl/usr/lib/i386-linux-gnu/perl5/5.22/PDL/IO/Matlab.pm
-Installing /build-1st/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl/usr/share/man/man3/PDL::IO::Matlab.3pm
-make[1]: Leaving directory '/build-1st/libpdl-io-matlab-perl-0.005'
+Installing /build-2nd/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl/usr/lib/i386-linux-gnu/perl5/5.22/auto/PDL/IO/Matlab/Matlab.so
+Installing /build-2nd/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl/usr/lib/i386-linux-gnu/perl5/5.22/PDL/IO/Matlab.pm
+Installing /build-2nd/libpdl-io-matlab-perl-0.005/debian/libpdl-io-matlab-perl/usr/share/man/man3/PDL::IO::Matlab.3pm
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird verlassen
dh_installdocs
dh_installchangelogs
dh_installman
@@ -548,16 +560,16 @@
dh_shlibdeps
dh_installdeb
debian/rules override_dh_gencontrol
-make[1]: Entering directory '/build-1st/libpdl-io-matlab-perl-0.005'
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird betreten
dh_pdl
dh_gencontrol
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
-make[1]: Leaving directory '/build-1st/libpdl-io-matlab-perl-0.005'
+make[1]: Verzeichnis „/build-2nd/libpdl-io-matlab-perl-0.005“ wird verlassen
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'libpdl-io-matlab-perl-dbgsym' in '../libpdl-io-matlab-perl-dbgsym_0.005-2_i386.deb'.
-dpkg-deb: building package 'libpdl-io-matlab-perl' in '../libpdl-io-matlab-perl_0.005-2_i386.deb'.
+dpkg-deb: Paket »libpdl-io-matlab-perl-dbgsym« wird in »../libpdl-io-matlab-perl-dbgsym_0.005-2_i386.deb« gebaut.
+dpkg-deb: Paket »libpdl-io-matlab-perl« wird in »../libpdl-io-matlab-perl_0.005-2_i386.deb« gebaut.
dpkg-distaddfile libpdl-io-matlab-perl_0.005-2_i386.buildinfo perl optional
dpkg-distaddfile: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges --build=any,all >../libpdl-io-matlab-perl_0.005-2_i386.changes
@@ -565,12 +577,15 @@
dpkg-source --after-build libpdl-io-matlab-perl-0.005
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/998/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/998/tmp/hooks/B01_cleanup finished
+W: no hooks of type I found -- ignoring
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/38042 and its subdirectories
-I: Current time: Wed Oct 18 01:52:41 GMT+12 2017
-I: pbuilder-time-stamp: 1508334761
+I: removing directory /srv/workspace/pbuilder/998 and its subdirectories
+I: Current time: Don Sep 15 21:31:24 GMT-14 2016
+I: pbuilder-time-stamp: 1473924684
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libpdl-io-matlab-perl_0.005-2.diff: 82.8% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libpdl-io-matlab-perl_0.005-2.diff.gz
b2/build.log: 78.2%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 77.6%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/libpdl-io-matlab-perl_0.005-2.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-CRtOyPXh/tmp.s5iourvO4V
+ mv /srv/reproducible-results/rbuild-debian-CRtOyPXh/tmp.s5iourvO4V /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpdl-io-matlab-perl_0.005-2.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpdl-io-matlab-perl_0.005-2.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-CRtOyPXh
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-CRtOyPXh/tmp.DCPMtOgH1V
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-CRtOyPXh -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-CRtOyPXh/dbd-tmp-qOdUcXt
++ schroot --directory /srv/reproducible-results/rbuild-debian-CRtOyPXh -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 60'
++ echo diffoscope 60
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 60 will be used to compare the two builds:'
+ _log I: 'diffoscope 60 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpdl-io-matlab-perl_0.005-2.rbuild.log
++ date -u
+ echo -e 'Thu Sep 15 07:31:26 UTC 2016 I: diffoscope 60 will be used to compare the two builds:'
Thu Sep 15 07:31:26 UTC 2016 I: diffoscope 60 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-CRtOyPXh -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-CRtOyPXh/dbd-tmp-qOdUcXt ; diffoscope --html /srv/reproducible-results/rbuild-debian-CRtOyPXh/libpdl-io-matlab-perl_0.005-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian-CRtOyPXh/libpdl-io-matlab-perl_0.005-2.diffoscope.txt /srv/reproducible-results/rbuild-debian-CRtOyPXh/b1/libpdl-io-matlab-perl_0.005-2_i386.buildinfo /srv/reproducible-results/rbuild-debian-CRtOyPXh/b2/libpdl-io-matlab-perl_0.005-2_i386.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-CRtOyPXh/tmp.DCPMtOgH1V
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _ _ _ _
| (_) |__ _ __ __| | | (_) ___ _ __ ___ __ _| |_| | __ _| |__
| | | '_ \| '_ \ / _` | |_____| |/ _ \ _____| '_ ` _ \ / _` | __| |/ _` | '_ \
| | | |_) | |_) | (_| | |_____| | (_) |_____| | | | | | (_| | |_| | (_| | |_) |
|_|_|_.__/| .__/ \__,_|_| |_|\___/ |_| |_| |_|\__,_|\__|_|\__,_|_.__/
|_|
_
_ __ ___ _ __| |
_____| '_ \ / _ \ '__| |
|_____| |_) | __/ | | |
| .__/ \___|_| |_|
|_|
Thu Sep 15 07:31:28 UTC 2016 I: diffoscope 60 found no differences in the changes files, and a .buildinfo file also exists.
Thu Sep 15 07:31:28 UTC 2016 I: libpdl-io-matlab-perl from unstable built successfully and reproducibly on i386.
Error: database is locked
Error: database is locked
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpdl-io-matlab-perl_0.005-2.rbuild.log: 74.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libpdl-io-matlab-perl_0.005-2.rbuild.log.gz
INFO: Starting at 2016-09-15 07:35:29.592939
INFO: Finished at 2016-09-15 07:36:24.445123, took: 0:00:54.852202
Thu 15 Sep 07:36:24 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-D4qqWX9i, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list