[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_7 #16789
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Oct 1 14:10:01 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_armhf_7/16789/------------------------------------------
[...truncated 1838 lines...]
+Preparativi per estrarre .../28-intltool-debian_0.35.0+20060710.4_all.deb...
+Estrazione di intltool-debian (0.35.0+20060710.4)...
+Selezionato il pacchetto po-debconf non precedentemente selezionato.
+Preparativi per estrarre .../29-po-debconf_1.0.19_all.deb...
+Estrazione di po-debconf (1.0.19)...
+Selezionato il pacchetto debhelper non precedentemente selezionato.
+Preparativi per estrarre .../30-debhelper_10_all.deb...
+Estrazione di debhelper (10)...
+Configurazione di libarchive-zip-perl (1.59-1)...
+Configurazione di libtimedate-perl (2.3000-2)...
+Configurazione di libsigsegv2:armhf (2.10-5)...
+Configurazione di groff-base (1.22.3-8)...
+Configurazione di gettext-base (0.19.8.1-1)...
+Configurazione di libpipeline1:armhf (1.4.1-2)...
+Configurazione di m4 (1.4.17-5)...
+Configurazione di libicu57:armhf (57.1-4)...
+Configurazione di libbsd0:armhf (0.8.3-1)...
+Configurazione di libxml2:armhf (2.9.4+dfsg1-2)...
+Configurazione di libmagic-mgc (1:5.28-4)...
+Configurazione di libmagic1:armhf (1:5.28-4)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Configurazione di autotools-dev (20160430.1)...
+Configurazione di libunistring0:armhf (0.9.6+really0.9.3-0.1)...
+Configurazione di libffi6:armhf (3.2.1-6)...
+Configurazione di bsdmainutils (9.0.10)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libfile-stripnondeterminism-perl (0.028-1)...
+Configurazione di libglib2.0-0:armhf (2.50.0-1)...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:armhf (0.6.11-2) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.28-4)...
+Configurazione di libcroco3:armhf (0.6.11-2)...
+Configurazione di automake (1:1.15-4)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-1)...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.19) ...
-Setting up dh-autoreconf (12) ...
-Setting up debhelper (10) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Processing triggers for libc-bin (2.24-3) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di po-debconf (1.0.19)...
+Configurazione di dh-autoreconf (12)...
+Configurazione di debhelper (10)...
+Configurazione di dh-strip-nondeterminism (0.028-1)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [libexporter-lite-perl_0.08-1.dsc]
I: copying [./libexporter-lite-perl_0.08.orig.tar.gz]
I: copying [./libexporter-lite-perl_0.08-1.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Sat Jan 16 06:10:37 2016 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made dom 17 gen 2016 08:10:37 +14
gpgv: using RSA key BB3A68018649AA06
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./libexporter-lite-perl_0.08-1.dsc
dpkg-source: info: extracting libexporter-lite-perl in libexporter-lite-perl-0.08
dpkg-source: info: unpacking libexporter-lite-perl_0.08.orig.tar.gz
dpkg-source: info: unpacking libexporter-lite-perl_0.08-1.debian.tar.xz
I: Building the package
-I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
+I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
dpkg-buildpackage: info: source package libexporter-lite-perl
dpkg-buildpackage: info: source version 0.08-1
dpkg-buildpackage: info: source distribution unstable
@@ -266,13 +277,13 @@
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j1
-make[1]: Entering directory '/build/libexporter-lite-perl-0.08'
+make[1]: ingresso nella directory "/build/libexporter-lite-perl-0.08"
cp lib/Exporter/Lite.pm blib/lib/Exporter/Lite.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build/libexporter-lite-perl-0.08'
+make[1]: uscita dalla directory "/build/libexporter-lite-perl-0.08"
dh_auto_test
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build/libexporter-lite-perl-0.08'
+make[1]: ingresso nella directory "/build/libexporter-lite-perl-0.08"
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/Exporter-Lite.t ..
1..30
@@ -308,20 +319,20 @@
ok 30 - use with version check
ok
All tests successful.
-Files=1, Tests=30, 1 wallclock secs ( 0.20 usr 0.03 sys + 0.24 cusr 0.03 csys = 0.50 CPU)
+Files=1, Tests=30, 1 wallclock secs ( 0.12 usr 0.01 sys + 0.16 cusr 0.04 csys = 0.33 CPU)
Result: PASS
-make[1]: Leaving directory '/build/libexporter-lite-perl-0.08'
+make[1]: uscita dalla directory "/build/libexporter-lite-perl-0.08"
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
make -j1 install DESTDIR=/build/libexporter-lite-perl-0.08/debian/libexporter-lite-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build/libexporter-lite-perl-0.08'
+make[1]: ingresso nella directory "/build/libexporter-lite-perl-0.08"
Manifying 1 pod document
Installing /build/libexporter-lite-perl-0.08/debian/libexporter-lite-perl/usr/share/perl5/Exporter/Lite.pm
Installing /build/libexporter-lite-perl-0.08/debian/libexporter-lite-perl/usr/share/man/man3/Exporter::Lite.3pm
-make[1]: Leaving directory '/build/libexporter-lite-perl-0.08'
+make[1]: uscita dalla directory "/build/libexporter-lite-perl-0.08"
dh_installdocs
dh_installchangelogs
dh_installman
@@ -343,12 +354,14 @@
dpkg-source --after-build libexporter-lite-perl-0.08
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/25439/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/25439/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/1118 and its subdirectories
-I: Current time: Sat Oct 1 02:04:30 GMT+12 2016
-I: pbuilder-time-stamp: 1475330670
+I: removing directory /srv/workspace/pbuilder/25439 and its subdirectories
+I: Current time: dom 2 ott 2016, 04.06.43, GMT-14
+I: pbuilder-time-stamp: 1475330803
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/armhf/libexporter-lite-perl_0.08-1.diff: 80.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/armhf/libexporter-lite-perl_0.08-1.diff.gz
b2/build.log: 75.5%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 74.8%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/testing/armhf/libexporter-lite-perl_0.08-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-lmIAME2S/tmp.Y2WMUQaCTh
+ mv /srv/reproducible-results/rbuild-debian-lmIAME2S/tmp.Y2WMUQaCTh /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/armhf/libexporter-lite-perl_0.08-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/armhf/libexporter-lite-perl_0.08-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-lmIAME2S
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-lmIAME2S/tmp.2eMC1MbuqG
+ local TIMEOUT=120m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-lmIAME2S -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-lmIAME2S/dbd-tmp-ICNiu5r
++ schroot --directory /srv/reproducible-results/rbuild-debian-lmIAME2S -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 61'
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ echo diffoscope 61
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 61 will be used to compare the two builds:'
+ _log I: 'diffoscope 61 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/armhf/libexporter-lite-perl_0.08-1.rbuild.log
++ date -u
+ echo -e 'Sat Oct 1 14:06:52 UTC 2016 I: diffoscope 61 will be used to compare the two builds:'
Sat Oct 1 14:06:52 UTC 2016 I: diffoscope 61 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-lmIAME2S -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-lmIAME2S/dbd-tmp-ICNiu5r ; diffoscope --html /srv/reproducible-results/rbuild-debian-lmIAME2S/libexporter-lite-perl_0.08-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-lmIAME2S/libexporter-lite-perl_0.08-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-lmIAME2S/b1/libexporter-lite-perl_0.08-1_armhf.buildinfo /srv/reproducible-results/rbuild-debian-lmIAME2S/b2/libexporter-lite-perl_0.08-1_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-lmIAME2S/tmp.2eMC1MbuqG
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _ _
| (_) |__ _____ ___ __ ___ _ __| |_ ___ _ __ | (_) |_ ___
| | | '_ \ / _ \ \/ / '_ \ / _ \| '__| __/ _ \ '__|____| | | __/ _ \_____
| | | |_) | __/> <| |_) | (_) | | | || __/ | |_____| | | || __/_____|
|_|_|_.__/ \___/_/\_\ .__/ \___/|_| \__\___|_| |_|_|\__\___|
|_|
_
_ __ ___ _ __| |
| '_ \ / _ \ '__| |
| |_) | __/ | | |
| .__/ \___|_| |_|
|_|
Sat Oct 1 14:06:54 UTC 2016 I: diffoscope 61 found no differences in the changes files, and a .buildinfo file also exists.
Sat Oct 1 14:06:54 UTC 2016 I: libexporter-lite-perl from testing built successfully and reproducibly on armhf.
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/armhf/libexporter-lite-perl_0.08-1.rbuild.log: 70.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/armhf/libexporter-lite-perl_0.08-1.rbuild.log.gz
INFO: Starting at 2016-10-01 14:09:00.657180
CRITICAL: SQLite database locked, could not execute query:
CRITICAL: "SELECT r.status, r.version, r.build_date FROM results AS r JOIN sources AS s ON r.package_id=s.id WHERE s.name="libexporter-lite-perl" AND s.architecture="amd64" AND s.suite="testing""
CRITICAL: Exiting script.
INFO: Finished at 2016-10-01 14:10:00.758781, took: 0:01:00.101636
Warning: cannot update html pages for libexporter-lite-perl
Sat 1 Oct 14:10:00 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-4d1FBV8F, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list