[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_60 #84

Sat Oct 15 01:14:19 UTC 2016

https://jenkins.debian.net/job/reproducible_builder_armhf_60/84/------------------------------------------
[...truncated 2661 lines...]
+Configurazione di libtiff5:armhf (4.0.6-2)...
+Configurazione di gettext-base (0.19.8.1-1)...
+Configurazione di libpipeline1:armhf (1.4.1-2)...
+Configurazione di m4 (1.4.17-5)...
+Configurazione di libicu57:armhf (57.1-4)...
+Configurazione di libbsd0:armhf (0.8.3-1)...
+Configurazione di ucf (3.0036)...
+Configurazione di libxml2:armhf (2.9.4+dfsg1-2)...
+Configurazione di libfreetype6:armhf (2.6.3-3+b1)...
+Configurazione di libmagic-mgc (1:5.28-4)...
+Configurazione di libmagic1:armhf (1:5.28-4)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Configurazione di patchutils (0.3.4-1)...
+Configurazione di autotools-dev (20160430.1)...
+Configurazione di libunistring0:armhf (0.9.6+really0.9.3-0.1)...
+Configurazione di libffi6:armhf (3.2.1-6)...
+Configurazione di libpdf-reuse-perl (0.39-1)...
+Configurazione di libxdmcp6:armhf (1:1.1.2-1.1)...
+Configurazione di bsdmainutils (9.0.11)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di libbarcode-code128-perl (2.21-1)...
+Configurazione di libx11-data (2:1.6.3-1)...
+Configurazione di libxau6:armhf (1:1.0.8-1)...
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libwebp6:armhf (0.5.1-2)...
+Configurazione di libfile-stripnondeterminism-perl (0.028-1)...
+Configurazione di fontconfig-config (2.11.0-6.7)...
+Configurazione di libglib2.0-0:armhf (2.50.1-1)...
 No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:armhf (0.6.11-2) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.28-4)...
+Configurazione di libcroco3:armhf (0.6.11-2)...
+Configurazione di automake (1:1.15-4)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-1)...
 Building database of manual pages ...
-Setting up libxcb1:armhf (1.12-1) ...
-Setting up libtool (2.4.6-2) ...
-Setting up libfontconfig1:armhf (2.11.0-6.7) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up libx11-6:armhf (2:1.6.3-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up libxpm4:armhf (1:3.5.11-1+b1) ...
-Setting up po-debconf (1.0.20) ...
-Setting up libgd3:armhf (2.2.3-3+b1) ...
-Setting up libgd-perl (2.53-3) ...
-Setting up libgd-barcode-perl (1.15-5) ...
-Setting up dh-autoreconf (12) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Setting up debhelper (10.2.2) ...
-Processing triggers for libc-bin (2.24-3) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libxcb1:armhf (1.12-1)...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di libfontconfig1:armhf (2.11.0-6.7)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di libx11-6:armhf (2:1.6.3-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di libxpm4:armhf (1:3.5.11-1+b1)...
+Configurazione di po-debconf (1.0.20)...
+Configurazione di libgd3:armhf (2.2.3-3+b1)...
+Configurazione di libgd-perl (2.53-3)...
+Configurazione di libgd-barcode-perl (1.15-5)...
+Configurazione di dh-autoreconf (12)...
+Configurazione di dh-strip-nondeterminism (0.028-1)...
+Configurazione di debhelper (10.2.2)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
  -> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
 fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
 I: Copying source file
 I: copying [libpdf-reuse-barcode-perl_0.07-1.dsc]
 I: copying [./libpdf-reuse-barcode-perl_0.07.orig.tar.gz]
 I: copying [./libpdf-reuse-barcode-perl_0.07-1.debian.tar.xz]
 I: Extracting source
 gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Sun May 10 04:54:25 2015 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made lun 11 mag 2015 06:54:25 +14
 gpgv:                using RSA key 6BE663C75A35C975
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
 dpkg-source: warning: failed to verify signature on ./libpdf-reuse-barcode-perl_0.07-1.dsc
 dpkg-source: info: extracting libpdf-reuse-barcode-perl in libpdf-reuse-barcode-perl-0.07
 dpkg-source: info: unpacking libpdf-reuse-barcode-perl_0.07.orig.tar.gz
 dpkg-source: info: unpacking libpdf-reuse-barcode-perl_0.07-1.debian.tar.xz
 I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
 dpkg-buildpackage: info: source package libpdf-reuse-barcode-perl
 dpkg-buildpackage: info: source version 0.07-1
 dpkg-buildpackage: info: source distribution unstable
@@ -382,12 +393,12 @@
  fakeroot debian/rules clean
 test -x debian/rules
 rm -f debian/stamp-makefile-build debian/stamp-makefile-install
-/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-1st/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean
-make[1]: Entering directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
-make[1]: *** No rule to make target 'clean'.
-make[1]: Leaving directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
-/usr/share/cdbs/1/class/makefile.mk:91: recipe for target 'makefile-clean' failed
-make: [makefile-clean] Error 2 (ignored)
+/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-2nd/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean
+make[1]: ingresso nella directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
+make[1]: ***  Nessuna regola per generare l'obiettivo "clean".
+make[1]: uscita dalla directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
+/usr/share/cdbs/1/class/makefile.mk:91: set di istruzioni per l'obiettivo "makefile-clean" non riuscito
+make: [makefile-clean] Errore 2 (ignorato)
 rm -f debian/stamp-makefile-check
 dh_clean 
  debian/rules build
@@ -399,8 +410,8 @@
 Generating a Unix-style Makefile
 Writing Makefile for PDF::Reuse::Barcode
 Writing MYMETA.yml and MYMETA.json
-/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-1st/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all
-make[1]: Entering directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
+/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-2nd/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all
+make[1]: ingresso nella directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
 "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/PDF/Reuse
 chmod 755 blib/lib/PDF/Reuse
 touch blib/lib/PDF/Reuse/.exists
@@ -439,10 +450,10 @@
   Barcode.pm blib/man3/PDF::Reuse::Barcode.3pm 
 Manifying 1 pod document
 true
-make[1]: Leaving directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
+make[1]: uscita dalla directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
 touch debian/stamp-makefile-build
-/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-1st/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1
-make[1]: Entering directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
+/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-2nd/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1
+make[1]: ingresso nella directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
 true
 true
 true
@@ -452,8 +463,8 @@
 PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl
 1..15
 # Running under perl version 5.024001 for linux
-# Current time local: Fri Oct 14 13:10:33 2016
-# Current time GMT:   Sat Oct 15 01:10:33 2016
+# Current time local: Sat Oct 15 15:13:42 2016
+# Current time GMT:   Sat Oct 15 01:13:42 2016
 # Using Test.pm version 1.28_01
 ok 1
 ok 2
@@ -472,7 +483,7 @@
 ok 15
 ok 16
 true
-make[1]: Leaving directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
+make[1]: uscita dalla directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
 touch debian/stamp-makefile-check
  fakeroot debian/rules binary
 test -x debian/rules
@@ -480,8 +491,8 @@
 dh_prep 
 dh_installdirs -A 
 mkdir -p "."
-/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-1st/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl"
-make[1]: Entering directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
+/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build-2nd/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl"
+make[1]: ingresso nella directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
 true
 true
 true
@@ -493,18 +504,18 @@
 Manifying 1 pod document
 true
 umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \
-	"blib/lib" "/build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/perl5" \
-	"blib/arch" "/build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/lib/arm-linux-gnueabihf/perl5/5.24" \
-	"blib/bin" "/build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/bin" \
-	"blib/script" "/build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/bin" \
-	"blib/man1" "/build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man1" \
-	"blib/man3" "/build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man3"
-Installing /build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/perl5/PDF/Reuse/Barcode.pm
-Installing /build-1st/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man3/PDF::Reuse::Barcode.3pm
+	"blib/lib" "/build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/perl5" \
+	"blib/arch" "/build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/lib/arm-linux-gnueabihf/perl5/5.24" \
+	"blib/bin" "/build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/bin" \
+	"blib/script" "/build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/bin" \
+	"blib/man1" "/build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man1" \
+	"blib/man3" "/build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man3"
+Installing /build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/perl5/PDF/Reuse/Barcode.pm
+Installing /build-2nd/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man3/PDF::Reuse::Barcode.3pm
 true
 true
 true
-make[1]: Leaving directory '/build-1st/libpdf-reuse-barcode-perl-0.07'
+make[1]: uscita dalla directory "/build-2nd/libpdf-reuse-barcode-perl-0.07"
 touch debian/stamp-makefile-install
 Adding cdbs dependencies to debian/libpdf-reuse-barcode-perl.substvars
 dh_installdirs -plibpdf-reuse-barcode-perl \
@@ -552,12 +563,14 @@
  dpkg-source --after-build libpdf-reuse-barcode-perl-0.07
 dpkg-buildpackage: info: binary-only upload (no source included)
 I: copying local configuration
+I: user script /srv/workspace/pbuilder/30388/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/30388/tmp/hooks/B01_cleanup finished
 I: unmounting /dev/shm filesystem
 I: unmounting dev/ptstee: /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libpdf-reuse-barcode-perl_0.07-1.diff: No space left on device
 filesystem
 I: unmounting run/shm filesystem
 I: unmounting proc filesystem
 I: unmounting sys filesystem
 I: cleaning the build env 
-I: removing directory /srv/workspace/pbuilder/30222 and its subdirectories
-I: Current time: Fri Oct 14 13:11:14 GMT+12 2016
-I: pbuilder-time-stamp: 1476493874
+I: removing directory /srv/workspace/pbuilder/30388 and its subdirectories
+I: Current time: sab 15 ott 2016, 15.14.10, GMT-14
+I: pbuilder-time-stamp: 1476494050
/srv/reproducible-results/rbuild-debian-qVMpQLMp/tmp.lihsDw3KvV:	 76.3% -- replaced with /srv/reproducible-results/rbuild-debian-qVMpQLMp/tmp.lihsDw3KvV.gz
INFO: Starting at 2016-10-15 01:14:18.819439
CRITICAL: buildinfo not detected at /var/lib/jenkins/userContent/reproducible/debian/buildinfo/unstable/armhf/libpdf-reuse-barcode-perl_0.07-1_armhf.buildinfo
CRITICAL: https://tests.reproducible-builds.org/debian/unstable/armhf/libpdf-reuse-barcode-perl didn't produce a buildlog, even though it has been built.
INFO: Finished at 2016-10-15 01:14:18.910382, took: 0:00:00.090955
Sat 15 Oct 01:14:18 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-XBqIw6Ju, which will now be removed.
Build step 'Execute shell' marked build as failure

