[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_37 #7666
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Oct 15 01:54:21 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_armhf_37/7666/------------------------------------------
[...truncated 2335 lines...]
+Estrazione di debhelper (10.2.2)...
+Selezionato il pacchetto libmath-calculus-expression-perl non precedentemente selezionato.
+Preparativi per estrarre .../31-libmath-calculus-expression-perl_0.2.2.ds-2_all.deb...
+Estrazione di libmath-calculus-expression-perl (0.2.2.ds-2)...
+Selezionato il pacchetto libmath-calculus-differentiate-perl non precedentemente selezionato.
+Preparativi per estrarre .../32-libmath-calculus-differentiate-perl_0.3-1_all.deb...
+Estrazione di libmath-calculus-differentiate-perl (0.3-1)...
+Configurazione di libmath-calculus-expression-perl (0.2.2.ds-2)...
+Configurazione di libarchive-zip-perl (1.59-1)...
+Configurazione di libtimedate-perl (2.3000-2)...
+Configurazione di libsigsegv2:armhf (2.10-5)...
+Configurazione di groff-base (1.22.3-8)...
+Configurazione di libmath-calculus-differentiate-perl (0.3-1)...
+Configurazione di gettext-base (0.19.8.1-1)...
+Configurazione di libpipeline1:armhf (1.4.1-2)...
+Configurazione di m4 (1.4.17-5)...
+Configurazione di libicu57:armhf (57.1-4)...
+Configurazione di libbsd0:armhf (0.8.3-1)...
+Configurazione di libxml2:armhf (2.9.4+dfsg1-2)...
+Configurazione di libmagic-mgc (1:5.28-4)...
+Configurazione di libmagic1:armhf (1:5.28-4)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Configurazione di autotools-dev (20160430.1)...
+Configurazione di libunistring0:armhf (0.9.6+really0.9.3-0.1)...
+Configurazione di libffi6:armhf (3.2.1-6)...
+Configurazione di bsdmainutils (9.0.11)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libfile-stripnondeterminism-perl (0.028-1)...
+Configurazione di libglib2.0-0:armhf (2.50.1-1)...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:armhf (0.6.11-2) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.28-4)...
+Configurazione di libcroco3:armhf (0.6.11-2)...
+Configurazione di automake (1:1.15-4)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-1)...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.20) ...
-Setting up dh-autoreconf (12) ...
-Setting up debhelper (10.2.2) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Processing triggers for libc-bin (2.24-3) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di po-debconf (1.0.20)...
+Configurazione di dh-autoreconf (12)...
+Configurazione di debhelper (10.2.2)...
+Configurazione di dh-strip-nondeterminism (0.028-1)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [libmath-calculus-newtonraphson-perl_0.1-1.dsc]
I: copying [./libmath-calculus-newtonraphson-perl_0.1.orig.tar.gz]
I: copying [./libmath-calculus-newtonraphson-perl_0.1-1.diff.gz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Fri Jun 13 07:30:10 2008 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made sab 14 giu 2008 09:30:10 +14
gpgv: using DSA key E525D620A7C89464
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./libmath-calculus-newtonraphson-perl_0.1-1.dsc
dpkg-source: info: extracting libmath-calculus-newtonraphson-perl in libmath-calculus-newtonraphson-perl-0.1
dpkg-source: info: unpacking libmath-calculus-newtonraphson-perl_0.1.orig.tar.gz
dpkg-source: info: applying libmath-calculus-newtonraphson-perl_0.1-1.diff.gz
I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
dpkg-buildpackage: info: source package libmath-calculus-newtonraphson-perl
dpkg-buildpackage: info: source version 0.1-1
dpkg-buildpackage: info: source distribution unstable
@@ -278,20 +289,20 @@
Writing Makefile for Math::Calculus::NewtonRaphson
Writing MYMETA.yml and MYMETA.json
/usr/bin/make
-make[1]: Entering directory '/build-1st/libmath-calculus-newtonraphson-perl-0.1'
+make[1]: ingresso nella directory "/build-2nd/libmath-calculus-newtonraphson-perl-0.1"
cp NewtonRaphson.pm blib/lib/Math/Calculus/NewtonRaphson.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build-1st/libmath-calculus-newtonraphson-perl-0.1'
+make[1]: uscita dalla directory "/build-2nd/libmath-calculus-newtonraphson-perl-0.1"
/usr/bin/make test
-make[1]: Entering directory '/build-1st/libmath-calculus-newtonraphson-perl-0.1'
+make[1]: ingresso nella directory "/build-2nd/libmath-calculus-newtonraphson-perl-0.1"
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl
1..1
# Running under perl version 5.024001 for linux
-# Current time local: Fri Oct 14 13:50:47 2016
-# Current time GMT: Sat Oct 15 01:50:47 2016
+# Current time local: Sat Oct 15 15:53:56 2016
+# Current time GMT: Sat Oct 15 01:53:56 2016
# Using Test.pm version 1.28_01
ok 1
-make[1]: Leaving directory '/build-1st/libmath-calculus-newtonraphson-perl-0.1'
+make[1]: uscita dalla directory "/build-2nd/libmath-calculus-newtonraphson-perl-0.1"
touch build-stamp
fakeroot debian/rules binary
dh_testdir
@@ -299,15 +310,15 @@
dh_clean -k
dh_clean: Compatibility levels before 9 are deprecated (level 5 in use)
dh_clean: dh_clean -k is deprecated; use dh_prep instead
-/usr/bin/make install DESTDIR=/build-1st/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl PREFIX=/usr
-make[1]: Entering directory '/build-1st/libmath-calculus-newtonraphson-perl-0.1'
+/usr/bin/make install DESTDIR=/build-2nd/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl PREFIX=/usr
+make[1]: ingresso nella directory "/build-2nd/libmath-calculus-newtonraphson-perl-0.1"
Manifying 1 pod document
-Installing /build-1st/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/share/perl5/Math/Calculus/NewtonRaphson.pm
-Installing /build-1st/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/share/man/man3/Math::Calculus::NewtonRaphson.3pm
-make[1]: Leaving directory '/build-1st/libmath-calculus-newtonraphson-perl-0.1'
-[ ! -d /build-1st/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/lib/perl5 ] || \
+Installing /build-2nd/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/share/perl5/Math/Calculus/NewtonRaphson.pm
+Installing /build-2nd/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/share/man/man3/Math::Calculus::NewtonRaphson.3pm
+make[1]: uscita dalla directory "/build-2nd/libmath-calculus-newtonraphson-perl-0.1"
+[ ! -d /build-2nd/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/lib/perl5 ] || \
rmdir --ignore-fail-on-non-empty --parents --verbose \
- /build-1st/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/lib/perl5
+ /build-2nd/libmath-calculus-newtonraphson-perl-0.1/debian/libmath-calculus-newtonraphson-perl/usr/lib/perl5
touch install-stamp
dh_testdir
dh_testroot
@@ -331,12 +342,14 @@
dpkg-source --after-build libmath-calculus-newtonraphson-perl-0.1
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/8987/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/8987/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/31489 and its subdirectories
-I: Current time: Fri Oct 14 13:51:10 GMT+12 2016
-I: pbuilder-time-stamp: 1476496270
+I: removing directory /srv/workspace/pbuilder/8987 and its subdirectories
+I: Current time: sab 15 ott 2016, 15.54.10, GMT-14
+I: pbuilder-time-stamp: 1476496450
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.diff: 81.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.diff.gz
b2/build.log: 77.6%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 77.1%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-rv0oPG98/tmp.GO8EfQ75Iw
+ mv /srv/reproducible-results/rbuild-debian-rv0oPG98/tmp.GO8EfQ75Iw /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-rv0oPG98
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-rv0oPG98/tmp.UWMzNiSZX3
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-rv0oPG98 -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-rv0oPG98/dbd-tmp-IPqf8xm
++ schroot --directory /srv/reproducible-results/rbuild-debian-rv0oPG98 -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 61'
++ echo diffoscope 61
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 61 will be used to compare the two builds:'
+ _log I: 'diffoscope 61 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.rbuild.log
++ date -u
+ echo -e 'Sat Oct 15 01:54:19 UTC 2016 I: diffoscope 61 will be used to compare the two builds:'
Sat Oct 15 01:54:19 UTC 2016 I: diffoscope 61 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-rv0oPG98 -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-rv0oPG98/dbd-tmp-IPqf8xm ; diffoscope --html /srv/reproducible-results/rbuild-debian-rv0oPG98/libmath-calculus-newtonraphson-perl_0.1-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-rv0oPG98/libmath-calculus-newtonraphson-perl_0.1-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-rv0oPG98/b1/libmath-calculus-newtonraphson-perl_0.1-1_armhf.buildinfo /srv/reproducible-results/rbuild-debian-rv0oPG98/b2/libmath-calculus-newtonraphson-perl_0.1-1_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-rv0oPG98/tmp.UWMzNiSZX3
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _ _
| (_) |__ _ __ ___ __ _| |_| |__ ___ __ _| | ___ _ _| |_ _ ___
| | | '_ \| '_ ` _ \ / _` | __| '_ \ _____ / __/ _` | |/ __| | | | | | | / __|
| | | |_) | | | | | | (_| | |_| | | |_____| (_| (_| | | (__| |_| | | |_| \__ \
|_|_|_.__/|_| |_| |_|\__,_|\__|_| |_| \___\__,_|_|\___|\__,_|_|\__,_|___/
_ _
_ __ _____ _| |_ ___ _ __ _ __ __ _ _ __ | |__ ___ ___
_____| '_ \ / _ \ \ /\ / / __/ _ \| '_ \| '__/ _` | '_ \| '_ \/ __|/ _ \
|_____| | | | __/\ V V /| || (_) | | | | | | (_| | |_) | | | \__ \ (_) |
|_| |_|\___| \_/\_/ \__\___/|_| |_|_| \__,_| .__/|_| |_|___/\___/
|_|
_
_ __ _ __ ___ _ __| |
| '_ \ _____| '_ \ / _ \ '__| |
| | | |_____| |_) | __/ | | |
|_| |_| | .__/ \___|_| |_|
|_|
Sat Oct 15 01:54:21 UTC 2016 I: diffoscope 61 found no differences in the changes files, and a .buildinfo file also exists.
tee: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.rbuild.log: No space left on device
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libmath-calculus-newtonraphson-perl_0.1-1.rbuild.log.gz: No space left on device
Sat 15 Oct 01:54:21 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-1PUySDpk, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list