[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_i386_6 #20077
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Oct 15 03:25:12 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_i386_6/20077/------------------------------------------
[...truncated 2040 lines...]
+bsdmainutils (9.0.11) wird eingerichtet ...
+update-alternatives: /usr/bin/bsd-write wird verwendet, um /usr/bin/write (write) im automatischen Modus bereitzustellen
+update-alternatives: /usr/bin/bsd-from wird verwendet, um /usr/bin/from (from) im automatischen Modus bereitzustellen
+autopoint (0.19.8.1-1) wird eingerichtet ...
+libfile-stripnondeterminism-perl (0.028-1) wird eingerichtet ...
+libglib2.0-0:i386 (2.50.0-2) wird eingerichtet ...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:i386 (0.6.11-2) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+autoconf (2.69-10) wird eingerichtet ...
+file (1:5.28-4) wird eingerichtet ...
+libcroco3:i386 (0.6.11-2) wird eingerichtet ...
+automake (1:1.15-4) wird eingerichtet ...
+update-alternatives: /usr/bin/automake-1.15 wird verwendet, um /usr/bin/automake (automake) im automatischen Modus bereitzustellen
+man-db (2.7.5-1) wird eingerichtet ...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.20) ...
-Setting up dh-autoreconf (12) ...
-Setting up debhelper (10.2.2) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Processing triggers for libc-bin (2.24-3) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+libtool (2.4.6-2) wird eingerichtet ...
+gettext (0.19.8.1-1) wird eingerichtet ...
+intltool-debian (0.35.0+20060710.4) wird eingerichtet ...
+po-debconf (1.0.20) wird eingerichtet ...
+dh-autoreconf (12) wird eingerichtet ...
+debhelper (10.2.2) wird eingerichtet ...
+dh-strip-nondeterminism (0.028-1) wird eingerichtet ...
+Trigger für libc-bin (2.24-3) werden verarbeitet ...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
+Lesen der erweiterten Statusinformationen...
+Initialisieren des Paketstatus'...
+Schreiben der erweiterten Statusinformationen...
+Erzeugen der Tag-Datenbank...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
I: Copying source file
I: copying [libuniversal-can-perl_1.20140328-1.dsc]
I: copying [./libuniversal-can-perl_1.20140328.orig.tar.gz]
I: copying [./libuniversal-can-perl_1.20140328-1.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Sat May 10 02:58:23 2014 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Allgemeiner Fehler
+gpgv: Signature made Son 11 Mai 2014 04:58:23 +14
gpgv: using RSA key BB3A68018649AA06
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Kein öffentlicher Schlüssel
dpkg-source: warning: failed to verify signature on ./libuniversal-can-perl_1.20140328-1.dsc
dpkg-source: info: extracting libuniversal-can-perl in libuniversal-can-perl-1.20140328
dpkg-source: info: unpacking libuniversal-can-perl_1.20140328.orig.tar.gz
dpkg-source: info: unpacking libuniversal-can-perl_1.20140328-1.debian.tar.xz
I: Building the package
-I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=i386 -rfakeroot
+I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=i386 -rfakeroot
dpkg-buildpackage: info: source package libuniversal-can-perl
dpkg-buildpackage: info: source version 1.20140328-1
dpkg-buildpackage: info: source distribution unstable
@@ -272,14 +283,14 @@
dh_auto_build
dh_auto_build: Compatibility levels before 9 are deprecated (level 8 in use)
make -j1
-make[1]: Entering directory '/build/libuniversal-can-perl-1.20140328'
+make[1]: Verzeichnis „/build/libuniversal-can-perl-1.20140328“ wird betreten
cp lib/UNIVERSAL/can.pm blib/lib/UNIVERSAL/can.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build/libuniversal-can-perl-1.20140328'
+make[1]: Verzeichnis „/build/libuniversal-can-perl-1.20140328“ wird verlassen
dh_auto_test
dh_auto_test: Compatibility levels before 9 are deprecated (level 8 in use)
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build/libuniversal-can-perl-1.20140328'
+make[1]: Verzeichnis „/build/libuniversal-can-perl-1.20140328“ wird betreten
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing UNIVERSAL::can 1.20140328, Perl 5.024001, /usr/bin/perl
t/00-load.t ..................
@@ -300,15 +311,15 @@
ok 3 - ... and not throw a warning
ok 4 - should be false
ok 5 - ... and not throw a warning
-ok 6 - SCALAR(0x8e54fb4) should be false
+ok 6 - SCALAR(0x8fce8f8) should be false
ok 7 - ... and not throw a warning
-ok 8 - HASH(0x8e55090) should be false
+ok 8 - HASH(0x8fce9d4) should be false
ok 9 - ... and not throw a warning
-ok 10 - ARRAY(0x8e62dd0) should be false
+ok 10 - ARRAY(0x8fcea74) should be false
ok 11 - ... and not throw a warning
ok 12 - 0 should be false
ok 13 - ... and not throw a warning
-ok 14 - CODE(0x8e550cc) should be false
+ok 14 - CODE(0x8fdc8b8) should be false
ok 15 - ... and not throw a warning
ok 16 - *test::FH should be false
ok 17 - ... and not throw a warning
@@ -369,9 +380,9 @@
ok 2 - CLASS->SUPER::can(METHOD) does not invoke CLASS->can(METHOD)
ok
All tests successful.
-Files=9, Tests=59, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.14 cusr 0.00 csys = 0.18 CPU)
+Files=9, Tests=59, 1 wallclock secs ( 0.09 usr 0.13 sys + 0.41 cusr 0.04 csys = 0.67 CPU)
Result: PASS
-make[1]: Leaving directory '/build/libuniversal-can-perl-1.20140328'
+make[1]: Verzeichnis „/build/libuniversal-can-perl-1.20140328“ wird verlassen
fakeroot debian/rules binary
dh binary
dh: Compatibility levels before 9 are deprecated (level 8 in use)
@@ -380,11 +391,11 @@
dh_auto_install
dh_auto_install: Compatibility levels before 9 are deprecated (level 8 in use)
make -j1 install DESTDIR=/build/libuniversal-can-perl-1.20140328/debian/libuniversal-can-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build/libuniversal-can-perl-1.20140328'
+make[1]: Verzeichnis „/build/libuniversal-can-perl-1.20140328“ wird betreten
Manifying 1 pod document
Installing /build/libuniversal-can-perl-1.20140328/debian/libuniversal-can-perl/usr/share/perl5/UNIVERSAL/can.pm
Installing /build/libuniversal-can-perl-1.20140328/debian/libuniversal-can-perl/usr/share/man/man3/UNIVERSAL::can.3pm
-make[1]: Leaving directory '/build/libuniversal-can-perl-1.20140328'
+make[1]: Verzeichnis „/build/libuniversal-can-perl-1.20140328“ wird verlassen
dh_installdocs
dh_installchangelogs
dh_installchangelogs: Compatibility levels before 9 are deprecated (level 8 in use)
@@ -400,7 +411,7 @@
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums
dh_builddeb
-dpkg-deb: building package 'libuniversal-can-perl' in '../libuniversal-can-perl_1.20140328-1_all.deb'.
+dpkg-deb: Paket »libuniversal-can-perl« wird in »../libuniversal-can-perl_1.20140328-1_all.deb« gebaut.
dpkg-genbuildinfo --build=any,all --buildinfo-id=i386
dpkg-genbuildinfo: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges --build=any,all >../libuniversal-can-perl_1.20140328-1_i386.changes
@@ -408,12 +419,14 @@
dpkg-source --after-build libuniversal-can-perl-1.20140328
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/25022/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/25022/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/47316 and its subdirectories
-I: Current time: Thu Nov 16 21:46:54 GMT+12 2017
-I: pbuilder-time-stamp: 1510912014
+I: removing directory /srv/workspace/pbuilder/25022 and its subdirectories
+I: Current time: Sam Okt 15 17:25:06 GMT-14 2016
+I: pbuilder-time-stamp: 1476501906
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/i386/libuniversal-can-perl_1.20140328-1.diff: 80.4% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/i386/libuniversal-can-perl_1.20140328-1.diff.gz
b2/build.log: 76.0%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 75.8%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/testing/i386/libuniversal-can-perl_1.20140328-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-YW6u2vHs/tmp.o1WBVKS18n
+ mv /srv/reproducible-results/rbuild-debian-YW6u2vHs/tmp.o1WBVKS18n /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libuniversal-can-perl_1.20140328-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libuniversal-can-perl_1.20140328-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-YW6u2vHs
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-YW6u2vHs/tmp.2H3J1R8t5c
+ local TIMEOUT=120m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-YW6u2vHs -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-YW6u2vHs/dbd-tmp-eIkJZk7
++ schroot --directory /srv/reproducible-results/rbuild-debian-YW6u2vHs -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 61'
++ echo diffoscope 61
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 61 will be used to compare the two builds:'
+ _log I: 'diffoscope 61 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libuniversal-can-perl_1.20140328-1.rbuild.log
++ date -u
+ echo -e 'Sat Oct 15 03:25:08 UTC 2016 I: diffoscope 61 will be used to compare the two builds:'
Sat Oct 15 03:25:08 UTC 2016 I: diffoscope 61 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-YW6u2vHs -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-YW6u2vHs/dbd-tmp-eIkJZk7 ; diffoscope --html /srv/reproducible-results/rbuild-debian-YW6u2vHs/libuniversal-can-perl_1.20140328-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-YW6u2vHs/libuniversal-can-perl_1.20140328-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-YW6u2vHs/b1/libuniversal-can-perl_1.20140328-1_i386.buildinfo /srv/reproducible-results/rbuild-debian-YW6u2vHs/b2/libuniversal-can-perl_1.20140328-1_i386.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-YW6u2vHs/tmp.2H3J1R8t5c
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _
| (_) |__ _ _ _ __ (_)_ _____ _ __ ___ __ _| | ___ __ _ _ __
| | | '_ \| | | | '_ \| \ \ / / _ \ '__/ __|/ _` | |_____ / __/ _` | '_ \
| | | |_) | |_| | | | | |\ V / __/ | \__ \ (_| | |_____| (_| (_| | | | |
|_|_|_.__/ \__,_|_| |_|_| \_/ \___|_| |___/\__,_|_| \___\__,_|_| |_|
_
_ __ ___ _ __| |
_____| '_ \ / _ \ '__| |
|_____| |_) | __/ | | |
| .__/ \___|_| |_|
|_|
Sat Oct 15 03:25:10 UTC 2016 I: diffoscope 61 found no differences in the changes files, and a .buildinfo file also exists.
Sat Oct 15 03:25:10 UTC 2016 I: libuniversal-can-perl from testing built successfully and reproducibly on i386.
INFO: Starting at 2016-10-15 03:25:11.880314
INFO: Finished at 2016-10-15 03:25:12.017655, took: 0:00:00.137357
Sat Oct 15 03:25:12 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/testing/i386/libuniversal-can-perl.html
Sat Oct 15 03:25:12 UTC 2016 - total duration: 0h 2m 24s.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libuniversal-can-perl_1.20140328-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libuniversal-can-perl_1.20140328-1.rbuild.log.gz: No space left on device
/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libuniversal-can-perl_1.20140328-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libuniversal-can-perl_1.20140328-1.rbuild.log.gz: No space left on device
Sat 15 Oct 03:25:12 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-QRuBZi9O, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list