[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_27 #10762
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Oct 15 03:30:04 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_armhf_27/10762/------------------------------------------
[...truncated 2363 lines...]
+Preparativi per estrarre .../28-intltool-debian_0.35.0+20060710.4_all.deb...
+Estrazione di intltool-debian (0.35.0+20060710.4)...
+Selezionato il pacchetto po-debconf non precedentemente selezionato.
+Preparativi per estrarre .../29-po-debconf_1.0.20_all.deb...
+Estrazione di po-debconf (1.0.20)...
+Selezionato il pacchetto debhelper non precedentemente selezionato.
+Preparativi per estrarre .../30-debhelper_10.2.2_all.deb...
+Estrazione di debhelper (10.2.2)...
+Configurazione di libarchive-zip-perl (1.59-1)...
+Configurazione di libtimedate-perl (2.3000-2)...
+Configurazione di libsigsegv2:armhf (2.10-5)...
+Configurazione di groff-base (1.22.3-8)...
+Configurazione di gettext-base (0.19.8.1-1)...
+Configurazione di libpipeline1:armhf (1.4.1-2)...
+Configurazione di m4 (1.4.17-5)...
+Configurazione di libicu57:armhf (57.1-4)...
+Configurazione di libbsd0:armhf (0.8.3-1)...
+Configurazione di libxml2:armhf (2.9.4+dfsg1-2)...
+Configurazione di libmagic-mgc (1:5.28-4)...
+Configurazione di libmagic1:armhf (1:5.28-4)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Configurazione di autotools-dev (20160430.1)...
+Configurazione di libunistring0:armhf (0.9.6+really0.9.3-0.1)...
+Configurazione di libffi6:armhf (3.2.1-6)...
+Configurazione di bsdmainutils (9.0.11)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libfile-stripnondeterminism-perl (0.028-1)...
+Configurazione di libglib2.0-0:armhf (2.50.1-1)...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:armhf (0.6.11-2) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.28-4)...
+Configurazione di libcroco3:armhf (0.6.11-2)...
+Configurazione di automake (1:1.15-4)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-1)...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.20) ...
-Setting up dh-autoreconf (12) ...
-Setting up debhelper (10.2.2) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Processing triggers for libc-bin (2.24-3) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di po-debconf (1.0.20)...
+Configurazione di dh-autoreconf (12)...
+Configurazione di debhelper (10.2.2)...
+Configurazione di dh-strip-nondeterminism (0.028-1)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [libterm-ttyrec-plus-perl_0.09-1.dsc]
I: copying [./libterm-ttyrec-plus-perl_0.09.orig.tar.gz]
I: copying [./libterm-ttyrec-plus-perl_0.09-1.debian.tar.gz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Thu Mar 8 18:28:45 2012 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made ven 09 mar 2012 20:28:45 +14
gpgv: using RSA key 789D6F057FD863FE
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./libterm-ttyrec-plus-perl_0.09-1.dsc
dpkg-source: info: extracting libterm-ttyrec-plus-perl in libterm-ttyrec-plus-perl-0.09
dpkg-source: info: unpacking libterm-ttyrec-plus-perl_0.09.orig.tar.gz
dpkg-source: info: unpacking libterm-ttyrec-plus-perl_0.09-1.debian.tar.gz
dpkg-source: info: applying dont-install-ttyplay-into-usr-bin.patch
I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
dpkg-buildpackage: info: source package libterm-ttyrec-plus-perl
dpkg-buildpackage: info: source version 0.09-1
dpkg-buildpackage: info: source distribution unstable
@@ -279,14 +290,14 @@
dh_auto_build
dh_auto_build: Compatibility levels before 9 are deprecated (level 8 in use)
make -j1
-make[1]: Entering directory '/build-1st/libterm-ttyrec-plus-perl-0.09'
+make[1]: ingresso nella directory "/build-2nd/libterm-ttyrec-plus-perl-0.09"
cp lib/Term/TtyRec/Plus.pm blib/lib/Term/TtyRec/Plus.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build-1st/libterm-ttyrec-plus-perl-0.09'
+make[1]: uscita dalla directory "/build-2nd/libterm-ttyrec-plus-perl-0.09"
dh_auto_test
dh_auto_test: Compatibility levels before 9 are deprecated (level 8 in use)
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build-1st/libterm-ttyrec-plus-perl-0.09'
+make[1]: ingresso nella directory "/build-2nd/libterm-ttyrec-plus-perl-0.09"
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/01-read.t t/02-parameters.t t/03-filter.t t/04-failure.t t/05-grep.t t/06-rewind.t t/07-bzip2.t t/99-bugs.t
# Testing Term::TtyRec::Plus 0.09, Perl 5.024001, /usr/bin/perl
t/00-load.t ........
@@ -490,9 +501,9 @@
ok 1 - time_threshold fix
ok
All tests successful.
-Files=9, Tests=173, 3 wallclock secs ( 0.16 usr 0.03 sys + 2.13 cusr 0.22 csys = 2.54 CPU)
+Files=9, Tests=173, 6 wallclock secs ( 0.34 usr 0.04 sys + 4.74 cusr 0.28 csys = 5.40 CPU)
Result: PASS
-make[1]: Leaving directory '/build-1st/libterm-ttyrec-plus-perl-0.09'
+make[1]: uscita dalla directory "/build-2nd/libterm-ttyrec-plus-perl-0.09"
fakeroot debian/rules binary
dh binary
dh: Compatibility levels before 9 are deprecated (level 8 in use)
@@ -500,12 +511,12 @@
dh_prep
dh_auto_install
dh_auto_install: Compatibility levels before 9 are deprecated (level 8 in use)
- make -j1 install DESTDIR=/build-1st/libterm-ttyrec-plus-perl-0.09/debian/libterm-ttyrec-plus-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build-1st/libterm-ttyrec-plus-perl-0.09'
+ make -j1 install DESTDIR=/build-2nd/libterm-ttyrec-plus-perl-0.09/debian/libterm-ttyrec-plus-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: ingresso nella directory "/build-2nd/libterm-ttyrec-plus-perl-0.09"
Manifying 1 pod document
-Installing /build-1st/libterm-ttyrec-plus-perl-0.09/debian/libterm-ttyrec-plus-perl/usr/share/perl5/Term/TtyRec/Plus.pm
-Installing /build-1st/libterm-ttyrec-plus-perl-0.09/debian/libterm-ttyrec-plus-perl/usr/share/man/man3/Term::TtyRec::Plus.3pm
-make[1]: Leaving directory '/build-1st/libterm-ttyrec-plus-perl-0.09'
+Installing /build-2nd/libterm-ttyrec-plus-perl-0.09/debian/libterm-ttyrec-plus-perl/usr/share/perl5/Term/TtyRec/Plus.pm
+Installing /build-2nd/libterm-ttyrec-plus-perl-0.09/debian/libterm-ttyrec-plus-perl/usr/share/man/man3/Term::TtyRec::Plus.3pm
+make[1]: uscita dalla directory "/build-2nd/libterm-ttyrec-plus-perl-0.09"
dh_installdocs
dh_installchangelogs
dh_installchangelogs: Compatibility levels before 9 are deprecated (level 8 in use)
@@ -531,12 +542,14 @@
dpkg-source --after-build libterm-ttyrec-plus-perl-0.09
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/8690/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/8690/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/32444 and its subdirectories
-I: Current time: Fri Oct 14 15:26:48 GMT+12 2016
-I: pbuilder-time-stamp: 1476502008
+I: removing directory /srv/workspace/pbuilder/8690 and its subdirectories
+I: Current time: sab 15 ott 2016, 17.29.52, GMT-14
+I: pbuilder-time-stamp: 1476502192
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.diff: 80.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.diff.gz
b2/build.log: 78.7%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 78.6%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-FXkVFiy8/tmp.hOiOKo34kO
+ mv /srv/reproducible-results/rbuild-debian-FXkVFiy8/tmp.hOiOKo34kO /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-FXkVFiy8
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-FXkVFiy8/tmp.L5BPcu0v7j
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-FXkVFiy8 -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-FXkVFiy8/dbd-tmp-TARVvgD
++ schroot --directory /srv/reproducible-results/rbuild-debian-FXkVFiy8 -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 61'
++ echo diffoscope 61
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 61 will be used to compare the two builds:'
+ _log I: 'diffoscope 61 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.rbuild.log
++ date -u
+ echo -e 'Sat Oct 15 03:30:01 UTC 2016 I: diffoscope 61 will be used to compare the two builds:'
Sat Oct 15 03:30:01 UTC 2016 I: diffoscope 61 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-FXkVFiy8 -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-FXkVFiy8/dbd-tmp-TARVvgD ; diffoscope --html /srv/reproducible-results/rbuild-debian-FXkVFiy8/libterm-ttyrec-plus-perl_0.09-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-FXkVFiy8/libterm-ttyrec-plus-perl_0.09-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-FXkVFiy8/b1/libterm-ttyrec-plus-perl_0.09-1_armhf.buildinfo /srv/reproducible-results/rbuild-debian-FXkVFiy8/b2/libterm-ttyrec-plus-perl_0.09-1_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-FXkVFiy8/tmp.L5BPcu0v7j
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _
| (_) |__ | |_ ___ _ __ _ __ ___ | |_| |_ _ _ _ __ ___ ___ _ __
| | | '_ \| __/ _ \ '__| '_ ` _ \ _____| __| __| | | | '__/ _ \/ __|____| '_ \
| | | |_) | || __/ | | | | | | |_____| |_| |_| |_| | | | __/ (_|_____| |_) |
|_|_|_.__/ \__\___|_| |_| |_| |_| \__|\__|\__, |_| \___|\___| | .__/
|___/ |_|
_ _
| |_ _ ___ _ __ ___ _ __| |
| | | | / __|_____| '_ \ / _ \ '__| |
| | |_| \__ \_____| |_) | __/ | | |
|_|\__,_|___/ | .__/ \___|_| |_|
|_|
Sat Oct 15 03:30:03 UTC 2016 I: diffoscope 61 found no differences in the changes files, and a .buildinfo file also exists.
Sat Oct 15 03:30:03 UTC 2016 I: libterm-ttyrec-plus-perl from unstable built successfully and reproducibly on armhf.
INFO: Starting at 2016-10-15 03:30:04.091703
INFO: Finished at 2016-10-15 03:30:04.183742, took: 0:00:00.092051
Sat Oct 15 03:30:04 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/armhf/libterm-ttyrec-plus-perl.html
Sat Oct 15 03:30:04 UTC 2016 - total duration: 0h 5m 11s.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.rbuild.log.gz: No space left on device
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libterm-ttyrec-plus-perl_0.09-1.rbuild.log.gz: No space left on device
Sat 15 Oct 03:30:04 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-wdAajCCG, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list