[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_i386_5 #23889
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Nov 19 17:45:12 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_i386_5/23889/------------------------------------------
[...truncated 2840 lines...]
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+libtool (2.4.6-2) wird eingerichtet ...
+python3.5 (3.5.2-6+b1) wird eingerichtet ...
+libpython3-stdlib:i386 (3.5.1-4) wird eingerichtet ...
+gettext (0.19.8.1-1) wird eingerichtet ...
+intltool-debian (0.35.0+20060710.4) wird eingerichtet ...
+po-debconf (1.0.20) wird eingerichtet ...
+dh-autoreconf (12) wird eingerichtet ...
+python3 (3.5.1-4) wird eingerichtet ...
+devscripts (2.16.8) wird eingerichtet ...
+dh-strip-nondeterminism (0.028-1) wird eingerichtet ...
+dh-python (2.20160818) wird eingerichtet ...
+debhelper (10.2.2) wird eingerichtet ...
+dh-buildinfo (0.11+nmu1) wird eingerichtet ...
+Trigger für libc-bin (2.24-5) werden verarbeitet ...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
+Lesen der erweiterten Statusinformationen...
+Initialisieren des Paketstatus'...
+Schreiben der erweiterten Statusinformationen...
+Erzeugen der Tag-Datenbank...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Paketlisten werden gelesen...
+Abhängigkeitsbaum wird aufgebaut....
+Statusinformationen werden eingelesen....
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
I: Copying source file
I: copying [libperlx-maybe-xs-perl_1.001-2.dsc]
I: copying [./libperlx-maybe-xs-perl_1.001.orig.tar.gz]
I: copying [./libperlx-maybe-xs-perl_1.001-2.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Fri May 30 05:01:23 2014 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Allgemeiner Fehler
+gpgv: Signature made Sam 31 Mai 2014 07:01:23 +14
gpgv: using RSA key 2C7C3146C1A00121
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Kein öffentlicher Schlüssel
dpkg-source: warning: failed to verify signature on ./libperlx-maybe-xs-perl_1.001-2.dsc
dpkg-source: info: extracting libperlx-maybe-xs-perl in libperlx-maybe-xs-perl-1.001
dpkg-source: info: unpacking libperlx-maybe-xs-perl_1.001.orig.tar.gz
dpkg-source: info: unpacking libperlx-maybe-xs-perl_1.001-2.debian.tar.xz
I: Building the package
-I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=i386 -rfakeroot
+I: user script /srv/workspace/pbuilder/46828/tmp/hooks/A01_modfiy_src_dir starting
+I: user script /srv/workspace/pbuilder/46828/tmp/hooks/A01_modfiy_src_dir finished
+I: Running cd /build/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=i386 -rfakeroot
dpkg-buildpackage: info: source package libperlx-maybe-xs-perl
dpkg-buildpackage: info: source version 1.001-2
dpkg-buildpackage: info: source distribution unstable
@@ -335,11 +349,11 @@
test -x debian/rules
rm -f debian/stamp-makefile-build debian/stamp-makefile-install
/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libperlx-maybe-xs-perl-1.001=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean
-make[1]: Entering directory '/build/libperlx-maybe-xs-perl-1.001'
-make[1]: *** No rule to make target 'clean'.
-make[1]: Leaving directory '/build/libperlx-maybe-xs-perl-1.001'
-/usr/share/cdbs/1/class/makefile.mk:91: recipe for target 'makefile-clean' failed
-make: [makefile-clean] Error 2 (ignored)
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird betreten
+make[1]: *** Keine Regel, um „clean“ zu erstellen.
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird verlassen
+/usr/share/cdbs/1/class/makefile.mk:91: die Regel für Ziel „makefile-clean“ scheiterte
+make: [makefile-clean] Fehler 2 (ignoriert)
rm -f debian/stamp-makefile-check
rm -f debian/copyright_newhints
rm -f debian/cdbs-install-list debian/cdbs-package-list debian/stamp-copyright-check
@@ -355,7 +369,7 @@
Scanning upstream source for new/changed copyright notices...
set -e; LC_ALL=C.UTF-8 /usr/bin/licensecheck --check '.*' --recursive --copyright --deb-fmt --ignore '^(debian/(changelog|copyright(|_hints|_newhints)))$' --lines 0 * | /usr/lib/cdbs/licensecheck2dep5 > debian/copyright_newhints
-/bin/sh: 1: /usr/bin/licensecheck: not found
+/bin/sh: /usr/bin/licensecheck: Datei oder Verzeichnis nicht gefunden
0 combinations of copyright and licensing found.
No new copyright notices found - assuming no news is good news...
touch debian/stamp-copyright-check
@@ -367,7 +381,7 @@
Writing Makefile for PerlX::Maybe::XS
Writing MYMETA.yml and MYMETA.json
/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libperlx-maybe-xs-perl-1.001=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all
-make[1]: Entering directory '/build/libperlx-maybe-xs-perl-1.001'
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird betreten
"/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/PerlX/Maybe
chmod 755 blib/lib/PerlX/Maybe
touch blib/lib/PerlX/Maybe/.exists
@@ -422,10 +436,10 @@
lib/PerlX/Maybe/XS.pm blib/man3/PerlX::Maybe::XS.3pm
Manifying 1 pod document
true
-make[1]: Leaving directory '/build/libperlx-maybe-xs-perl-1.001'
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird verlassen
touch debian/stamp-makefile-build
/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libperlx-maybe-xs-perl-1.001=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1
-make[1]: Entering directory '/build/libperlx-maybe-xs-perl-1.001'
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird betreten
true
true
true
@@ -455,10 +469,10 @@
ok 1
ok
All tests successful.
-Files=3, Tests=5, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.12 cusr 0.00 csys = 0.16 CPU)
+Files=3, Tests=5, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr 0.00 csys = 0.10 CPU)
Result: PASS
true
-make[1]: Leaving directory '/build/libperlx-maybe-xs-perl-1.001'
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird verlassen
touch debian/stamp-makefile-check
fakeroot debian/rules binary
CDBS WARNING: copyright-check disabled - licensecheck is missing.
@@ -472,13 +486,13 @@
Scanning upstream source for new/changed copyright notices...
set -e; LC_ALL=C.UTF-8 /usr/bin/licensecheck --check '.*' --recursive --copyright --deb-fmt --ignore '^(debian/(changelog|copyright(|_hints|_newhints)))$' --lines 0 * | /usr/lib/cdbs/licensecheck2dep5 > debian/copyright_newhints
-/bin/sh: 1: /usr/bin/licensecheck: not found
+/bin/sh: /usr/bin/licensecheck: Datei oder Verzeichnis nicht gefunden
0 combinations of copyright and licensing found.
No new copyright notices found - assuming no news is good news...
touch debian/stamp-copyright-check
touch debian/stamp-upstream-cruft
/usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libperlx-maybe-xs-perl-1.001=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/libperlx-maybe-xs-perl-1.001/debian/libperlx-maybe-xs-perl"
-make[1]: Entering directory '/build/libperlx-maybe-xs-perl-1.001'
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird betreten
true
true
true
@@ -503,7 +517,7 @@
true
true
true
-make[1]: Leaving directory '/build/libperlx-maybe-xs-perl-1.001'
+make[1]: Verzeichnis „/build/libperlx-maybe-xs-perl-1.001“ wird verlassen
touch debian/stamp-makefile-install
Adding cdbs dependencies to debian/libperlx-maybe-xs-perl.substvars
dh_installdirs -plibperlx-maybe-xs-perl \
@@ -557,8 +571,8 @@
dpkg-gencontrol: warning: File::FcntlLock not available; using flock which is not NFS-safe
dh_md5sums -plibperlx-maybe-xs-perl
dh_builddeb -plibperlx-maybe-xs-perl
-dpkg-deb: building package 'libperlx-maybe-xs-perl-dbgsym' in '../libperlx-maybe-xs-perl-dbgsym_1.001-2_i386.deb'.
-dpkg-deb: building package 'libperlx-maybe-xs-perl' in '../libperlx-maybe-xs-perl_1.001-2_i386.deb'.
+dpkg-deb: Paket »libperlx-maybe-xs-perl-dbgsym« wird in »../libperlx-maybe-xs-perl-dbgsym_1.001-2_i386.deb« gebaut.
+dpkg-deb: Paket »libperlx-maybe-xs-perl« wird in »../libperlx-maybe-xs-perl_1.001-2_i386.deb« gebaut.
dpkg-genbuildinfo --build=binary --buildinfo-id=i386
dpkg-genbuildinfo: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges --build=binary >../libperlx-maybe-xs-perl_1.001-2_i386.changes
@@ -566,12 +580,14 @@
dpkg-source --after-build libperlx-maybe-xs-perl-1.001
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/46828/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/46828/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/26557 and its subdirectories
-I: Current time: Sat Nov 19 05:40:27 -12 2016
-I: pbuilder-time-stamp: 1479577227
+I: removing directory /srv/workspace/pbuilder/46828 and its subdirectories
+I: Current time: Sam Dez 23 14:04:33 +14 2017
+I: pbuilder-time-stamp: 1513987473
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/i386/libperlx-maybe-xs-perl_1.001-2.diff: 82.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/testing/i386/libperlx-maybe-xs-perl_1.001-2.diff.gz
b2/build.log: 79.8%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 79.7%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/testing/i386/libperlx-maybe-xs-perl_1.001-2.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-c9N1Zk1x/tmp.hergfboIns
+ mv /srv/reproducible-results/rbuild-debian-c9N1Zk1x/tmp.hergfboIns /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libperlx-maybe-xs-perl_1.001-2.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libperlx-maybe-xs-perl_1.001-2.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ filter_changes_files
+ sed -i -e '/^ [a-f0-9]\{32,64\} .*\.buildinfo$/d' b1/libperlx-maybe-xs-perl_1.001-2_i386.changes b2/libperlx-maybe-xs-perl_1.001-2_i386.changes
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-c9N1Zk1x
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-c9N1Zk1x/tmp.yg1vPYhmbm
+ local TIMEOUT=120m
+ DBDSUITE=testing
+ '[' testing = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-c9N1Zk1x -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-c9N1Zk1x/dbd-tmp-lMgACzl
++ schroot --directory /srv/reproducible-results/rbuild-debian-c9N1Zk1x -c source:jenkins-reproducible-testing-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 62'
++ echo diffoscope 62
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 62 will be used to compare the two builds:'
+ _log I: 'diffoscope 62 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libperlx-maybe-xs-perl_1.001-2.rbuild.log
++ date -u
+ echo -e 'Sat Nov 19 17:41:39 UTC 2016 I: diffoscope 62 will be used to compare the two builds:'
Sat Nov 19 17:41:39 UTC 2016 I: diffoscope 62 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-c9N1Zk1x -c source:jenkins-reproducible-testing-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-c9N1Zk1x/dbd-tmp-lMgACzl ; diffoscope --html /srv/reproducible-results/rbuild-debian-c9N1Zk1x/libperlx-maybe-xs-perl_1.001-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian-c9N1Zk1x/libperlx-maybe-xs-perl_1.001-2.diffoscope.txt /srv/reproducible-results/rbuild-debian-c9N1Zk1x/b1/libperlx-maybe-xs-perl_1.001-2_i386.changes /srv/reproducible-results/rbuild-debian-c9N1Zk1x/b2/libperlx-maybe-xs-perl_1.001-2_i386.changes'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-c9N1Zk1x/tmp.yg1vPYhmbm
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _
| (_) |__ _ __ ___ _ __| |_ __ _ __ ___ __ _ _ _| |__ ___
| | | '_ \| '_ \ / _ \ '__| \ \/ /____| '_ ` _ \ / _` | | | | '_ \ / _ \_____
| | | |_) | |_) | __/ | | |> <_____| | | | | | (_| | |_| | |_) | __/_____|
|_|_|_.__/| .__/ \___|_| |_/_/\_\ |_| |_| |_|\__,_|\__, |_.__/ \___|
|_| |___/
_
__ _____ _ __ ___ _ __| |
\ \/ / __|_____| '_ \ / _ \ '__| |
> <\__ \_____| |_) | __/ | | |
/_/\_\___/ | .__/ \___|_| |_|
|_|
Sat Nov 19 17:41:41 UTC 2016 I: diffoscope 62 found no differences in the changes files, and a .buildinfo file also exists.
Sat Nov 19 17:41:41 UTC 2016 I: libperlx-maybe-xs-perl from testing built successfully and reproducibly on i386.
Error: database is locked
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libperlx-maybe-xs-perl_1.001-2.rbuild.log: 76.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/testing/i386/libperlx-maybe-xs-perl_1.001-2.rbuild.log.gz
INFO: Starting at 2016-11-19 17:44:42.244065
INFO: Finished at 2016-11-19 17:45:12.188286, took: 0:00:29.944244
Sat 19 Nov 17:45:12 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-djgpWJwK, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list