[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_i386_5 #30933
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Mon Feb 6 01:23:13 UTC 2017
https://jenkins.debian.net/job/reproducible_builder_i386_5/30933/------------------------------------------
[...truncated 15.70 MB...]
+ok 83 - $here is valid (in thread 4)
+ok 84 - $up is no longer valid (in thread 4)
+ok 85 - $here is valid (in thread 25)
+ok 86 - $up is no longer valid (in thread 25)
+ok 87 - $here is valid (in thread 10)
+ok 88 - $up is no longer valid (in thread 10)
+ok 89 - $here is valid (in thread 9)
+ok 90 - $up is no longer valid (in thread 9)
+ok 91 - $here is valid (in thread 18)
+ok 92 - $up is no longer valid (in thread 18)
+ok 93 - $here is valid (in thread 22)
+ok 94 - $up is no longer valid (in thread 22)
+ok 95 - $here is valid (in thread 24)
+ok 96 - $up is no longer valid (in thread 24)
+ok 97 - $here is valid (in thread 12)
+ok 98 - $up is no longer valid (in thread 12)
+ok 99 - $here is valid (in thread 28)
+ok 100 - $up is no longer valid (in thread 28)
+ok 101 - $here is valid (in thread 19)
+ok 102 - $up is no longer valid (in thread 19)
+ok 103 - $here is valid (in thread 6)
+ok 104 - $up is no longer valid (in thread 6)
+ok 105 - $here is valid (in thread 27)
+ok 106 - $up is no longer valid (in thread 27)
+ok 107 - $here is valid (in thread 1)
+ok 108 - $up is no longer valid (in thread 1)
+ok 109 - $here is no longer valid (out of thread 1)
+ok 110 - $here is no longer valid (out of thread 2)
+ok 111 - $here is valid (in thread 23)
+ok 112 - $up is no longer valid (in thread 23)
+ok 113 - $here is valid (in thread 3)
+ok 114 - $up is no longer valid (in thread 3)
+ok 115 - $here is no longer valid (out of thread 3)
+ok 116 - $here is no longer valid (out of thread 4)
+ok 117 - $here is no longer valid (out of thread 5)
+ok 118 - $here is no longer valid (out of thread 6)
+ok 119 - $here is no longer valid (out of thread 7)
+ok 120 - $here is no longer valid (out of thread 8)
+ok 121 - $here is no longer valid (out of thread 9)
+ok 122 - $here is no longer valid (out of thread 10)
+ok 123 - $here is no longer valid (out of thread 11)
+ok 124 - $here is no longer valid (out of thread 12)
+ok 125 - $here is no longer valid (out of thread 13)
+ok 126 - $here is valid (in thread 15)
+ok 127 - $up is no longer valid (in thread 15)
+ok 128 - $here is no longer valid (out of thread 14)
+ok 129 - $here is no longer valid (out of thread 15)
+ok 130 - $here is valid (in thread 29)
+ok 131 - $up is no longer valid (in thread 29)
+ok 132 - $here is valid (in thread 17)
+ok 133 - $up is no longer valid (in thread 17)
+ok 134 - $here is valid (in thread 16)
+ok 135 - $up is no longer valid (in thread 16)
+ok 136 - $here is no longer valid (out of thread 16)
+ok 137 - $here is no longer valid (out of thread 17)
+ok 138 - $here is no longer valid (out of thread 18)
+ok 139 - $here is no longer valid (out of thread 19)
+ok 140 - $here is no longer valid (out of thread 20)
+ok 141 - $here is no longer valid (out of thread 21)
+ok 142 - $here is no longer valid (out of thread 22)
+ok 143 - $here is no longer valid (out of thread 23)
+ok 144 - $here is no longer valid (out of thread 24)
+ok 145 - $here is no longer valid (out of thread 25)
+ok 146 - $here is no longer valid (out of thread 26)
+ok 147 - $here is no longer valid (out of thread 27)
+ok 148 - $here is no longer valid (out of thread 28)
+ok 149 - $here is no longer valid (out of thread 29)
ok 150 - $here is no longer valid (out of thread 30)
ok 151 - all the UIDs were different
1..151
@@ -102836,9 +102853,9 @@
1..770
ok
All tests successful.
-Files=54, Tests=102369, 19 wallclock secs ( 0.00 usr 11.71 sys + 0.00 cusr 12.68 csys = 24.39 CPU)
+Files=54, Tests=102369, 7 wallclock secs ( 3.68 usr 0.06 sys + 3.72 cusr 0.16 csys = 7.62 CPU)
Result: PASS
-make[1]: Leaving directory '/build/1st/libscope-upper-perl-0.29'
+make[1]: Leaving directory '/build/libscope-upper-perl-0.29/2nd'
create-stamp debian/debhelper-build-stamp
fakeroot debian/rules binary
dh binary
@@ -102846,21 +102863,21 @@
dh_testroot
dh_prep
dh_auto_install
- make -j1 install DESTDIR=/build/1st/libscope-upper-perl-0.29/debian/libscope-upper-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build/1st/libscope-upper-perl-0.29'
+ make -j1 install DESTDIR=/build/libscope-upper-perl-0.29/2nd/debian/libscope-upper-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: Entering directory '/build/libscope-upper-perl-0.29/2nd'
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
-Installing /build/1st/libscope-upper-perl-0.29/debian/libscope-upper-perl/usr/lib/i386-linux-gnu/perl5/5.24/auto/Scope/Upper/Upper.so
-Installing /build/1st/libscope-upper-perl-0.29/debian/libscope-upper-perl/usr/lib/i386-linux-gnu/perl5/5.24/Scope/Upper.pm
-Installing /build/1st/libscope-upper-perl-0.29/debian/libscope-upper-perl/usr/share/man/man3/Scope::Upper.3pm
-make[1]: Leaving directory '/build/1st/libscope-upper-perl-0.29'
+Installing /build/libscope-upper-perl-0.29/2nd/debian/libscope-upper-perl/usr/lib/i386-linux-gnu/perl5/5.24/auto/Scope/Upper/Upper.so
+Installing /build/libscope-upper-perl-0.29/2nd/debian/libscope-upper-perl/usr/lib/i386-linux-gnu/perl5/5.24/Scope/Upper.pm
+Installing /build/libscope-upper-perl-0.29/2nd/debian/libscope-upper-perl/usr/share/man/man3/Scope::Upper.3pm
+make[1]: Leaving directory '/build/libscope-upper-perl-0.29/2nd'
dh_installdocs
dh_installchangelogs
debian/rules override_dh_installexamples
-make[1]: Entering directory '/build/1st/libscope-upper-perl-0.29'
+make[1]: Entering directory '/build/libscope-upper-perl-0.29/2nd'
dh_installexamples
-sed -i '1s|^#!perl|#!/usr/bin/perl|' /build/1st/libscope-upper-perl-0.29/debian/libscope-upper-perl/usr/share/doc/libscope-upper-perl/examples/*
-make[1]: Leaving directory '/build/1st/libscope-upper-perl-0.29'
+sed -i '1s|^#!perl|#!/usr/bin/perl|' /build/libscope-upper-perl-0.29/2nd/debian/libscope-upper-perl/usr/share/doc/libscope-upper-perl/examples/*
+make[1]: Leaving directory '/build/libscope-upper-perl-0.29/2nd'
dh_installman
dh_perl
dh_link
@@ -102879,15 +102896,17 @@
dpkg-genbuildinfo --build=binary
dpkg-genchanges --build=binary >../libscope-upper-perl_0.29-1_i386.changes
dpkg-genchanges: info: binary-only upload (no source code included)
- dpkg-source --after-build libscope-upper-perl-0.29
+ dpkg-source --after-build 2nd
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/35667/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/35667/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/32400 and its subdirectories
-I: Current time: Sun Feb 5 13:21:36 -12 2017
-I: pbuilder-time-stamp: 1486344096
+I: removing directory /srv/workspace/pbuilder/35667 and its subdirectories
+I: Current time: Sun Mar 11 21:44:48 +14 2018
+I: pbuilder-time-stamp: 1520754288
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libscope-upper-perl_0.29-1.diff: 81.5% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libscope-upper-perl_0.29-1.diff.gz
b2/build.log: 93.0%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 93.0%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/libscope-upper-perl_0.29-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-UZAD0OAy/tmp.YQdJ30NUPR
+ mv /srv/reproducible-results/rbuild-debian-UZAD0OAy/tmp.YQdJ30NUPR /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libscope-upper-perl_0.29-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libscope-upper-perl_0.29-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ filter_changes_files
+ sed -i -e '/^ [a-f0-9]\{32,64\} .*\.buildinfo$/d' b1/libscope-upper-perl_0.29-1_i386.changes b2/libscope-upper-perl_0.29-1_i386.changes
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-UZAD0OAy
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-UZAD0OAy/tmp.QPy7Vt0RAh
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-UZAD0OAy -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-UZAD0OAy/dbd-tmp-nrWoYk3
++ schroot --directory /srv/reproducible-results/rbuild-debian-UZAD0OAy -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 70'
++ echo diffoscope 70
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 70 will be used to compare the two builds:'
+ _log I: 'diffoscope 70 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libscope-upper-perl_0.29-1.rbuild.log
++ date -u
+ echo -e 'Mon Feb 6 01:22:10 UTC 2017 I: diffoscope 70 will be used to compare the two builds:'
Mon Feb 6 01:22:10 UTC 2017 I: diffoscope 70 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-UZAD0OAy -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-UZAD0OAy/dbd-tmp-nrWoYk3 ; diffoscope --html /srv/reproducible-results/rbuild-debian-UZAD0OAy/libscope-upper-perl_0.29-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-UZAD0OAy/libscope-upper-perl_0.29-1.diffoscope.txt --profile=- /srv/reproducible-results/rbuild-debian-UZAD0OAy/b1/libscope-upper-perl_0.29-1_i386.changes /srv/reproducible-results/rbuild-debian-UZAD0OAy/b2/libscope-upper-perl_0.29-1_i386.changes'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-UZAD0OAy/tmp.QPy7Vt0RAh
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian-UZAD0OAy/libscope-upper-perl_0.29-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-UZAD0OAy/libscope-upper-perl_0.29-1.diffoscope.txt --profile=- /srv/reproducible-results/rbuild-debian-UZAD0OAy/b1/libscope-upper-perl_0.29-1_i386.changes /srv/reproducible-results/rbuild-debian-UZAD0OAy/b2/libscope-upper-perl_0.29-1_i386.changes
==================================================================================================================================================================================================================================================================================================================================================================================================================================================
command (total time: 0.000s)
----------------------------
0.000s 1 call cmp (internal)
has_same_content_as (total time: 0.000s)
----------------------------------------
0.000s 1 call abc.DotChangesFile
main (total time: 0.008s)
-------------------------
0.008s 2 calls outputs
0.000s 1 call cleanup
recognizes (total time: 0.007s)
-------------------------------
0.007s 10 calls diffoscope.comparators.binary.FilesystemFile
_ _ _
| (_) |__ ___ ___ ___ _ __ ___ _ _ _ __ _ __ ___ _ __
| | | '_ \/ __|/ __/ _ \| '_ \ / _ \_____| | | | '_ \| '_ \ / _ \ '__|____
| | | |_) \__ \ (_| (_) | |_) | __/_____| |_| | |_) | |_) | __/ | |_____|
|_|_|_.__/|___/\___\___/| .__/ \___| \__,_| .__/| .__/ \___|_|
|_| |_| |_|
_
_ __ ___ _ __| |
| '_ \ / _ \ '__| |
| |_) | __/ | | |
| .__/ \___|_| |_|
|_|
Mon Feb 6 01:22:11 UTC 2017 I: diffoscope 70 found no differences in the changes files, and a .buildinfo file also exists.
Mon Feb 6 01:22:12 UTC 2017 I: libscope-upper-perl from unstable built successfully and reproducibly on i386.
UPDATE 1
INSERT 0 1
DELETE 1
INFO: Starting at 2017-02-06 01:22:12.970121
INFO: Finished at 2017-02-06 01:22:13.298375, took: 0:00:00.328273
Mon Feb 6 01:22:13 UTC 2017 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/i386/libscope-upper-perl.html
Mon Feb 6 01:22:13 UTC 2017 I: Submitting .buildinfo files to external archives:
Mon Feb 6 01:22:13 UTC 2017 I: Done submitting .buildinfo files to submit at buildinfo.kfreebsd.eu.
Mon Feb 6 01:22:43 UTC 2017 E: Could not submit buildinfo from b1 to http://buildinfo.debian.net/api/submit
Mon Feb 6 01:23:13 UTC 2017 E: Could not submit buildinfo from b2 to http://buildinfo.debian.net/api/submit
Mon Feb 6 01:23:13 UTC 2017 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Mon Feb 6 01:23:13 UTC 2017 I: Done submitting .buildinfo files.
Mon Feb 6 01:23:13 UTC 2017 I: Removing signed libscope-upper-perl_0.29-1_i386.buildinfo.asc files:
removed ‘./b1/libscope-upper-perl_0.29-1_i386.buildinfo.asc’
removed ‘./b2/libscope-upper-perl_0.29-1_i386.buildinfo.asc’
Mon Feb 6 01:23:13 UTC 2017 - total duration: 0h 2m 7s.
Starting cleanup.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libscope-upper-perl_0.29-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libscope-upper-perl_0.29-1.rbuild.log.gz: No space left on device
Starting cleanup.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libscope-upper-perl_0.29-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libscope-upper-perl_0.29-1.rbuild.log.gz: No space left on device
Mon 6 Feb 01:23:13 UTC 2017 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-DXYHG6Ln, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list