[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_i386_6 #32879
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Thu Feb 16 06:12:19 UTC 2017
https://jenkins.debian.net/job/reproducible_builder_i386_6/32879/------------------------------------------
[...truncated 80.20 KB...]
Checking if your kit is complete...
Looks good
"\x{00c3}" does not map to ascii at /usr/share/perl/5.24/ExtUtils/MakeMaker.pm line 1185.
@@ -278,22 +289,22 @@
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j1
-make[1]: Entering directory '/build/1st/libnet-ntp-perl-1.5'
+make[1]: Entering directory '/build/2nd/libnet-ntp-perl-1.5'
cp lib/Net/NTP.pm blib/lib/Net/NTP.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build/1st/libnet-ntp-perl-1.5'
+make[1]: Leaving directory '/build/2nd/libnet-ntp-perl-1.5'
dh_auto_test
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build/1st/libnet-ntp-perl-1.5'
+make[1]: Entering directory '/build/2nd/libnet-ntp-perl-1.5'
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/1.t ..
1..1
ok 1 - use Net::NTP;
ok
All tests successful.
-Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.02 cusr 0.00 csys = 0.04 CPU)
+Files=1, Tests=1, 1 wallclock secs ( 0.00 usr 0.04 sys + 0.00 cusr 0.11 csys = 0.15 CPU)
Result: PASS
-make[1]: Leaving directory '/build/1st/libnet-ntp-perl-1.5'
+make[1]: Leaving directory '/build/2nd/libnet-ntp-perl-1.5'
create-stamp debian/debhelper-build-stamp
fakeroot debian/rules binary
dh binary
@@ -301,12 +312,12 @@
dh_testroot
dh_prep
dh_auto_install
- make -j1 install DESTDIR=/build/1st/libnet-ntp-perl-1.5/debian/libnet-ntp-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build/1st/libnet-ntp-perl-1.5'
+ make -j1 install DESTDIR=/build/2nd/libnet-ntp-perl-1.5/debian/libnet-ntp-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: Entering directory '/build/2nd/libnet-ntp-perl-1.5'
Manifying 1 pod document
-Installing /build/1st/libnet-ntp-perl-1.5/debian/libnet-ntp-perl/usr/share/perl5/Net/NTP.pm
-Installing /build/1st/libnet-ntp-perl-1.5/debian/libnet-ntp-perl/usr/share/man/man3/Net::NTP.3pm
-make[1]: Leaving directory '/build/1st/libnet-ntp-perl-1.5'
+Installing /build/2nd/libnet-ntp-perl-1.5/debian/libnet-ntp-perl/usr/share/perl5/Net/NTP.pm
+Installing /build/2nd/libnet-ntp-perl-1.5/debian/libnet-ntp-perl/usr/share/man/man3/Net::NTP.3pm
+make[1]: Leaving directory '/build/2nd/libnet-ntp-perl-1.5'
dh_installdocs
dh_installchangelogs
dh_installexamples
@@ -327,12 +338,14 @@
dpkg-source --after-build libnet-ntp-perl-1.5
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/8315/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/8315/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/37840 and its subdirectories
-I: Current time: Wed Mar 21 00:33:32 -12 2018
-I: pbuilder-time-stamp: 1521635612
+I: removing directory /srv/workspace/pbuilder/8315 and its subdirectories
+I: Current time: Thu Feb 16 20:11:23 +14 2017
+I: pbuilder-time-stamp: 1487225483
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libnet-ntp-perl_1.5-1.diff: 67.1% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/i386/libnet-ntp-perl_1.5-1.diff.gz
b2/build.log: 75.5%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 75.5%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/i386/libnet-ntp-perl_1.5-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-sewqdYTY/tmp.0qbpwIg7Jk
+ mv /srv/reproducible-results/rbuild-debian-sewqdYTY/tmp.0qbpwIg7Jk /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libnet-ntp-perl_1.5-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libnet-ntp-perl_1.5-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ filter_changes_files
+ sed -i -e '/^ [a-f0-9]\{32,64\} .*\.buildinfo$/d' b1/libnet-ntp-perl_1.5-1_i386.changes b2/libnet-ntp-perl_1.5-1_i386.changes
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-sewqdYTY
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-sewqdYTY/tmp.3qE6tP4t3G
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-sewqdYTY -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-sewqdYTY/dbd-tmp-n79oEwb
++ schroot --directory /srv/reproducible-results/rbuild-debian-sewqdYTY -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 77'
++ echo diffoscope 77
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 77 will be used to compare the two builds:'
+ _log I: 'diffoscope 77 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libnet-ntp-perl_1.5-1.rbuild.log
++ date -u
+ echo -e 'Thu Feb 16 06:11:37 UTC 2017 I: diffoscope 77 will be used to compare the two builds:'
Thu Feb 16 06:11:37 UTC 2017 I: diffoscope 77 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-sewqdYTY -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-sewqdYTY/dbd-tmp-n79oEwb ; diffoscope --html /srv/reproducible-results/rbuild-debian-sewqdYTY/libnet-ntp-perl_1.5-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-sewqdYTY/libnet-ntp-perl_1.5-1.diffoscope.txt --profile=- /srv/reproducible-results/rbuild-debian-sewqdYTY/b1/libnet-ntp-perl_1.5-1_i386.changes /srv/reproducible-results/rbuild-debian-sewqdYTY/b2/libnet-ntp-perl_1.5-1_i386.changes'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-sewqdYTY/tmp.3qE6tP4t3G
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian-sewqdYTY/libnet-ntp-perl_1.5-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-sewqdYTY/libnet-ntp-perl_1.5-1.diffoscope.txt --profile=- /srv/reproducible-results/rbuild-debian-sewqdYTY/b1/libnet-ntp-perl_1.5-1_i386.changes /srv/reproducible-results/rbuild-debian-sewqdYTY/b2/libnet-ntp-perl_1.5-1_i386.changes
==============================================================================================================================================================================================================================================================================================================================================================================================================================
command (total time: 0.000s)
----------------------------
0.000s 1 call cmp (internal)
has_same_content_as (total time: 0.000s)
----------------------------------------
0.000s 1 call abc.DotChangesFile
main (total time: 0.231s)
-------------------------
0.231s 2 calls outputs
0.000s 1 call cleanup
recognizes (total time: 0.007s)
-------------------------------
0.007s 10 calls diffoscope.comparators.binary.FilesystemFile
_ _ _ _ _ _
| (_) |__ _ __ ___| |_ _ __ | |_ _ __ _ __ ___ _ __| |
| | | '_ \| '_ \ / _ \ __|____| '_ \| __| '_ \ _____| '_ \ / _ \ '__| |
| | | |_) | | | | __/ ||_____| | | | |_| |_) |_____| |_) | __/ | | |
|_|_|_.__/|_| |_|\___|\__| |_| |_|\__| .__/ | .__/ \___|_| |_|
|_| |_|
Thu Feb 16 06:11:39 UTC 2017 I: diffoscope 77 found no differences in the changes files, and a .buildinfo file also exists.
Thu Feb 16 06:11:39 UTC 2017 I: libnet-ntp-perl from unstable built successfully and reproducibly on i386.
UPDATE 1
INSERT 0 1
DELETE 1
INFO: Starting at 2017-02-16 06:11:44.943663
INFO: Finished at 2017-02-16 06:11:45.620040, took: 0:00:00.676397
Thu Feb 16 06:11:45 UTC 2017 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/i386/libnet-ntp-perl.html
Thu Feb 16 06:11:45 UTC 2017 I: Submitting .buildinfo files to external archives:
Thu Feb 16 06:12:10 UTC 2017 I: Done submitting .buildinfo files to submit at buildinfo.kfreebsd.eu.
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>500 Internal Server Error — buildinfo.debian.net</title>
<link href="/static/css/bootstrap.957474c344c7.css" rel="stylesheet" />
<link href="/static/css/bidb.f3cc555c2e5e.css" rel="stylesheet" media="screen" />
</head>
<body class="error-bg">
<div class="container error-404">
<div class="row">
<div class="col-sm-6">
<h1>500</h1>
<h3>
There was an error processing your request.
</h3>
</div>
</div>
</div>
<script src="/static/js/jquery.fb2d334dabf4.js"></script>
<script src="/static/js/bootstrap.fb81549ee289.js"></script>
</body>
</html>
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>500 Internal Server Error — buildinfo.debian.net</title>
<link href="/static/css/bootstrap.957474c344c7.css" rel="stylesheet" />
<link href="/static/css/bidb.f3cc555c2e5e.css" rel="stylesheet" media="screen" />
</head>
<body class="error-bg">
<div class="container error-404">
<div class="row">
<div class="col-sm-6">
<h1>500</h1>
<h3>
There was an error processing your request.
</h3>
</div>
</div>
</div>
<script src="/static/js/jquery.fb2d334dabf4.js"></script>
<script src="/static/js/bootstrap.fb81549ee289.js"></script>
</body>
</html>
Thu Feb 16 06:12:19 UTC 2017 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Thu Feb 16 06:12:19 UTC 2017 I: Done submitting .buildinfo files.
Thu Feb 16 06:12:19 UTC 2017 I: Removing signed libnet-ntp-perl_1.5-1_i386.buildinfo.asc files:
removed ‘./b1/libnet-ntp-perl_1.5-1_i386.buildinfo.asc’
removed ‘./b2/libnet-ntp-perl_1.5-1_i386.buildinfo.asc’
Thu Feb 16 06:12:19 UTC 2017 - total duration: 0h 1m 44s.
Starting cleanup.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libnet-ntp-perl_1.5-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libnet-ntp-perl_1.5-1.rbuild.log.gz: No space left on device
Starting cleanup.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libnet-ntp-perl_1.5-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/i386/libnet-ntp-perl_1.5-1.rbuild.log.gz: No space left on device
Thu 16 Feb 06:12:19 UTC 2017 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-m6mHp3gD, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list