[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_3 #20342
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Thu Feb 16 09:27:54 UTC 2017
https://jenkins.debian.net/job/reproducible_builder_armhf_3/20342/------------------------------------------
[...truncated 249.52 KB...]
Write using Sun primitive formats
Write using Cray primitive formats
Second test is to write files with pointers:
Write using native formats
Write using DEC primitive formats
Write using Sun primitive formats
Write using Cray primitive formats
Third test is to update pointered files with flat data:
Update using native formats
Update using DEC primitive formats
Update using Sun primitive formats
Update using Cray primitive formats
Fourth test is exhaustive check of other primitive formats:
Testing Sun format
Testing i86 format
Testing alpha format
Testing sgi64 format
Testing DEC format
Testing Cray format
Testing XDR format
Testing Mac format
Testing Mac long-double format
Testing IBM PC format
Testing VAX format
Testing VAX G-double format
Testing Sun-3/Sun-2 format
Testing native format
Timing Category CPU sec System sec Wall sec
Time to write/test all formats 0.065 0.005 0.071
Fifth test is check of Contents Log machinery:
Contents Log -- testing Sun format
Contents Log -- testing DEC format
Contents Log -- testing Cray format
Contents Log -- testing VAX format
Contents Log -- testing native format
Non-PDB Contents Log -- testing Sun format
Non-PDB Contents Log -- testing DEC format
Non-PDB Contents Log -- testing Cray format
Non-PDB Contents Log -- testing VAX format
Non-PDB Contents Log -- testing native format
Sixth test is flat history files (be patient):
History -- testing Sun format
History -- testing DEC format
History -- testing Cray format
History -- testing VAX format
History -- testing native format
Timing Category CPU sec System sec Wall sec
Time to write history files 0.705 0.080 0.784
Seventh test is a pointered history file:
Eighth test is vsave in-memory files:
Ninth test is vpack in-memory files:
Shock tracker timing test:
Timing Category CPU sec System sec Wall sec
Time per pass 0.023 0.000 0.023
Total time 0.460 0.000 0.460
Escape factor timing test:
Timing Category CPU sec System sec Wall sec
Time per pass 0.042 0.004 0.046
Total time 0.625 0.065 0.692
Computing exponentials 0.270 0.015 0.286
Zone generator timing test:
Timing Category CPU sec System sec Wall sec
Time per pass 0.006 0.000 0.006
Total time 0.605 0.000 0.604
testing fft routines...
Timing Category CPU sec System sec Wall sec
FFT elapsed time 0.495 0.000 0.496
testing LU decomposition routine...
Timing Category CPU sec System sec Wall sec
LU elapsed time 0.765 0.010 0.787
testing QR decomposition routine...
Timing Category CPU sec System sec Wall sec
QR elapsed time 0.610 0.000 0.611
testing SVD routine...
Timing Category CPU sec System sec Wall sec
SVD elapsed time 0.705 0.000 0.706
using size 200
norm. resid resid machep x(1) x(n)
3.44281520e+00 3.05755421e-13 2.22044605e-16 1.00000000e+00 1.00000000e+00
times are reported for matrices of order 200
times for array with leading dimension of 200
dgesv mflops unit ratio
5.000e-02 1.083e+02 1.847e-02 8.929e-01
5.000e-02 1.083e+02 1.847e-02 8.929e-01
5.000e-02 1.083e+02 1.847e-02 8.929e-01
result of 50 passes through solver
dgesv mflops unit ratio
4.940e-02 1.096e+02 1.825e-02 8.821e-01
Timing Category CPU sec System sec Wall sec
Lissajous test 0.050 0.000 0.052
Frames per wall clock second= 967.213
Timing Category CPU sec System sec Wall sec
Lissajous test 0.045 0.005 0.054
Frames per wall clock second= 917.818
Each of the six tests will run no more than one minute,
so just be patient if you have a slow terminal.
50 frames of hollow 51-by-51 mesh direct
Timing Category CPU sec System sec Wall sec
Yorick interpreter 0.045 0.000 0.045
Gist graphics 0.040 0.000 0.044
Yorick+Gist total 0.085 0.000 0.089
Frames per second (total/gist)=573.562/1163.595
50 frames of 51-by-51 cell array direct
Timing Category CPU sec System sec Wall sec
Yorick interpreter 0.050 0.000 0.045
Gist graphics 0.035 0.010 0.099
Yorick+Gist total 0.085 0.010 0.144
Frames per second (total/gist)= 354.258/513.993
50 frames of filled 51-by-51 mesh direct
Timing Category CPU sec System sec Wall sec
Yorick interpreter 0.045 0.000 0.045
Gist graphics 0.150 0.020 1.134
Yorick+Gist total 0.195 0.020 1.179
Frames per second (total/gist)= 43.246/44.976
50 frames of hollow 51-by-51 mesh animated
Timing Category CPU sec System sec Wall sec
Yorick interpreter 0.040 0.005 0.046
Gist graphics 0.045 0.010 0.066
Yorick+Gist total 0.085 0.015 0.113
Frames per second (total/gist)=452.690/768.367
50 frames of 51-by-51 cell array animated
Timing Category CPU sec System sec Wall sec
Yorick interpreter 0.045 0.000 0.046
Gist graphics 0.040 0.000 0.111
Yorick+Gist total 0.085 0.000 0.157
Frames per second (total/gist)= 325.230/459.487
50 frames of filled 51-by-51 mesh animated
Timing Category CPU sec System sec Wall sec
Yorick interpreter 0.060 0.000 0.046
Gist graphics 0.155 0.015 1.092
Yorick+Gist total 0.215 0.015 1.138
Frames per second (total/gist)= 44.809/46.708
200.000000 frames of filled mesh drumhead completed in 6.968339 sec
Rate for filled mesh is 258.031222 frames/(CPU sec), 28.700833 frames(wall sec)
200.000000 frames of wireframe surface drumhead completed in 7.373514 sec
Rate for filled mesh is 223.438722 frames/(CPU sec), 27.123742 frames(wall sec)
200.000000 frames of filled surface drumhead completed in 6.523108 sec
Rate for filled mesh is 200.984826 frames/(CPU sec), 30.659761 frames(wall sec)
Yorick comprehensive graphics test.
Each frame will be described at the terminal.
Test 1 Commands: window, 0, wait=1, dpi=100; plg, [0,1]
Test 2 Commands: window, 0, wait=1; plg, [0,1]
Test 3 Commands: plg, [1,0]
Test 4 Commands: logxy, 1, 0
Test 5 Commands: logxy, 0, 0
Test 6 Commands: limits, 1.2, 1.8, 0.2, 0.8
Test 7 Commands: range, 0.4, 0.6
Test 8 Commands: limits
Test 9 Commands: fma; plg, sin(x), x
Five cycles of a sine wave on a new frame.
Before you continue, try clicking with the mouse buttons:
Left button zooms in, right button zooms out, middle no zoom
In each case, the point where you press the mouse button will
be translated to the point where you release the mouse button.
Test 10 Commands: pledit, marks=0, width=6, type="dash"
Test 11 Commands: plg, r*sin(x), r*cos(x), color=-4-i
Test 12 Commands: pltitle, "Colored nested cardioids"; plq
1: A: plg, r*sin(x), r*cos(x)
2: B: plg, r*sin(x), r*cos(x)
3: C: plg, r*sin(x), r*cos(x)
4: D: plg, r*sin(x), r*cos(x)
5: E: plg, r*sin(x), r*cos(x)
6: F: plg, r*sin(x), r*cos(x)
Adds the title above the upper tick marks.
Test 13 Commands: pledit, color="fg", type=0, marker=i
Changes the colors to foreground, types to no lines.
Test 14 Commands: pledit, marks=0, type=i
Changes line types to solid, dash, dot, dashdo, dashdotdot.
Test 15 Commands: plm, y, x
Test 16 Commands: plv, v, u, y, x
Test 17 Commands: plc, z, y,x; plm, y,x, boundary=1, type=2
Test 18 Commands: plf, zncen(z), y,x; plc, z, y,x
Test 19 Commands: palette, "<various>.gp"
After each new palette is installed, hit <RETURN> for the next,
or q<RETURN> to begin test 20. There are 6 palettes altogether.
Test 20 Commands: window, style="<various>.gs"
After each new style is installed, hit <RETURN> for the next,
or q<RETURN> to begin test 21. There are 5 styles altogether.
Test 21 Commands: pli, image
Test 22 Commands: pldj, x0, y0, x1, y1
Test 23 Commands: plfp, z, y, x, n
Test 24 Commands: plfc, z, y,x; plm, y,x, boundary=1, type=2
Yorick comprehensive plt command test.
Each frame will be described at the terminal.
ERROR (txtest) failed to open X display or create X window
LINE: 547 FILE: /build/1st/yorick-2.2.04+dfsg1/relocate/i/testg.i
yorick: quitting on error in batch mode
debian/rules:26: recipe for target 'check' failed
make: *** [check] Error 1
dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2
I: copying local configuration
E: Failed autobuilding of package
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/13376 and its subdirectories
removed ‘/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/yorick_2.2.04+dfsg1-6.rbuild.log’
removed ‘/var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/yorick_2.2.04+dfsg1-6.build1.log.gz’
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 85.0%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/yorick_2.2.04+dfsg1-6.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-AfDCvYlf/tmp.DDEvoPfIFh
+ mv /srv/reproducible-results/rbuild-debian-AfDCvYlf/tmp.DDEvoPfIFh /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/yorick_2.2.04+dfsg1-6.rbuild.log
mv: error writing ‘/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/yorick_2.2.04+dfsg1-6.rbuild.log’: No space left on device
mv: failed to extend ‘/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/yorick_2.2.04+dfsg1-6.rbuild.log’: No space left on device
+ cleanup_all
+ echo 'Starting cleanup.'
Starting cleanup.
+ '[' 0 = 1 ']'
+ '[' '!' -z '' ']'
+ '[' '!' -f /srv/reproducible-results/rbuild-debian-AfDCvYlf/tmp.DDEvoPfIFh ']'
+ gzip -9fvn /srv/reproducible-results/rbuild-debian-AfDCvYlf/tmp.DDEvoPfIFh
/srv/reproducible-results/rbuild-debian-AfDCvYlf/tmp.DDEvoPfIFh: 83.9% -- replaced with /srv/reproducible-results/rbuild-debian-AfDCvYlf/tmp.DDEvoPfIFh.gz
+ '[' master = master ']'
+ gen_package_html yorick
+ cd /srv/jenkins/bin
+ python3 -c 'import reproducible_html_packages as rep
pkg = rep.Package('\''yorick'\'', no_notes=True)
rep.gen_packages_html([pkg], no_clean=True)'
INFO: Starting at 2017-02-16 09:27:53.554967
INFO: Finished at 2017-02-16 09:27:53.893057, took: 0:00:00.338103
+ cd -
+ cd
+ rm -r /srv/reproducible-results/rbuild-debian-AfDCvYlf
+ echo 'All cleanup done.'
All cleanup done.
Thu 16 Feb 09:27:53 UTC 2017 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-smnLEXt1, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list