[Qa-jenkins-scm] Build failed in Jenkins: reproducible_setup_pbuilder_experimental_armhf_ff64a #232
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sun May 13 09:58:59 BST 2018
See <https://jenkins.debian.net/job/reproducible_setup_pbuilder_experimental_armhf_ff64a/232/display/redirect>
------------------------------------------
[...truncated 15.35 KB...]
I: Unpacking ncurses-bin...
I: Unpacking libhogweed4:armhf...
I: Unpacking libnettle6:armhf...
I: Unpacking libp11-kit0:armhf...
I: Unpacking libpam-modules:armhf...
I: Unpacking libpam-modules-bin...
I: Unpacking libpam-runtime...
I: Unpacking libpam0g:armhf...
I: Unpacking libpcre3:armhf...
I: Unpacking perl-base...
I: Unpacking sed...
I: Unpacking login...
I: Unpacking passwd...
I: Unpacking libsystemd0:armhf...
I: Unpacking libudev1:armhf...
I: Unpacking sysvinit-utils...
I: Unpacking tar...
I: Unpacking tzdata...
I: Unpacking bsdutils...
I: Unpacking fdisk...
I: Unpacking libblkid1:armhf...
I: Unpacking libfdisk1:armhf...
I: Unpacking libmount1:armhf...
I: Unpacking libsmartcols1:armhf...
I: Unpacking libuuid1:armhf...
I: Unpacking mount...
I: Unpacking util-linux...
I: Unpacking liblzma5:armhf...
I: Unpacking zlib1g:armhf...
I: Configuring required packages...
I: Configuring ncurses-base...
I: Configuring debian-archive-keyring...
I: Configuring libsemanage-common...
I: Configuring gcc-8-base:armhf...
I: Configuring libaudit-common...
I: Configuring libc6:armhf...
I: Configuring libpcre3:armhf...
I: Configuring libbz2-1.0:armhf...
I: Configuring libtasn1-6:armhf...
I: Configuring libgpg-error0:armhf...
I: Configuring libgmp10:armhf...
I: Configuring libc-bin...
I: Configuring libseccomp2:armhf...
I: Configuring libdebconfclient0:armhf...
I: Configuring libselinux1:armhf...
I: Configuring diffutils...
I: Configuring findutils...
I: Configuring libcap-ng0:armhf...
I: Configuring libext2fs2:armhf...
I: Configuring libsepol1:armhf...
I: Configuring libgcc1:armhf...
I: Configuring sed...
I: Configuring libsmartcols1:armhf...
I: Configuring libcom-err2:armhf...
I: Configuring libaudit1:armhf...
I: Configuring libtinfo5:armhf...
I: Configuring libudev1:armhf...
I: Configuring libunistring2:armhf...
I: Configuring libnettle6:armhf...
I: Configuring libattr1:armhf...
I: Configuring libss2:armhf...
I: Configuring liblzma5:armhf...
I: Configuring libidn2-0:armhf...
I: Configuring base-passwd...
I: Configuring liblz4-1:armhf...
I: Configuring debianutils...
I: Configuring libgcrypt20:armhf...
I: Configuring libuuid1:armhf...
I: Configuring libdb5.3:armhf...
I: Configuring zlib1g:armhf...
I: Configuring hostname...
I: Configuring mawk...
I: Configuring gpgv...
I: Configuring libtinfo6:armhf...
I: Configuring libsystemd0:armhf...
I: Configuring libzstd1:armhf...
I: Configuring libblkid1:armhf...
I: Configuring libhogweed4:armhf...
I: Configuring base-files...
I: Configuring libsemanage1:armhf...
I: Configuring libstdc++6:armhf...
I: Configuring libffi6:armhf...
I: Configuring libmount1:armhf...
I: Configuring libacl1:armhf...
I: Configuring ncurses-bin...
I: Configuring libapt-pkg5.0:armhf...
I: Configuring bash...
I: Configuring libncursesw6:armhf...
I: Configuring bsdutils...
I: Configuring libfdisk1:armhf...
I: Configuring coreutils...
I: Configuring e2fsprogs...
I: Configuring tar...
I: Configuring libp11-kit0:armhf...
I: Configuring dpkg...
I: Configuring fdisk...
I: Configuring perl-base...
I: Configuring grep...
I: Configuring debconf...
I: Configuring tzdata...
I: Configuring gzip...
I: Configuring dash...
I: Configuring libgnutls30:armhf...
I: Configuring init-system-helpers...
I: Configuring libpam0g:armhf...
I: Configuring util-linux...
I: Configuring libpam-modules-bin...
I: Configuring mount...
I: Configuring sysvinit-utils...
I: Configuring libpam-modules:armhf...
I: Configuring libpam-runtime...
I: Configuring passwd...
I: Configuring login...
I: Configuring adduser...
I: Configuring apt...
I: Configuring libc-bin...
I: Unpacking the base system...
I: Unpacking binutils...
I: Unpacking binutils-arm-linux-gnueabihf...
I: Unpacking binutils-common:armhf...
I: Unpacking libbinutils:armhf...
I: Unpacking build-essential...
I: Unpacking bzip2...
I: Unpacking dpkg-dev...
I: Unpacking libdpkg-perl...
I: Unpacking cpp-7...
I: Unpacking g++-7...
I: Unpacking gcc-7...
I: Unpacking gcc-7-base:armhf...
I: Unpacking libasan4:armhf...
I: Unpacking libcilkrts5:armhf...
I: Unpacking libgcc-7-dev:armhf...
I: Unpacking libstdc++-7-dev:armhf...
I: Unpacking libubsan0:armhf...
I: Unpacking libatomic1:armhf...
I: Unpacking libcc1-0:armhf...
I: Unpacking libgomp1:armhf...
I: Unpacking cpp...
I: Unpacking g++...
I: Unpacking gcc...
I: Unpacking libgdbm-compat4:armhf...
I: Unpacking libgdbm5:armhf...
I: Unpacking libc-dev-bin...
I: Unpacking libc6-dev:armhf...
I: Unpacking libisl19:armhf...
I: Unpacking linux-libc-dev:armhf...
I: Unpacking make...
I: Unpacking libmpc3:armhf...
I: Unpacking libmpfr6:armhf...
I: Unpacking patch...
I: Unpacking libperl5.26:armhf...
I: Unpacking perl...
I: Unpacking perl-modules-5.26...
I: Unpacking xz-utils...
I: Configuring the base system...
I: Configuring libgomp1:armhf...
I: Configuring libatomic1:armhf...
I: Configuring libcc1-0:armhf...
I: Configuring make...
I: Configuring linux-libc-dev:armhf...
I: Configuring libmpfr6:armhf...
I: Configuring perl-modules-5.26...
I: Configuring libgdbm5:armhf...
I: Configuring bzip2...
I: Configuring gcc-7-base:armhf...
I: Configuring binutils-common:armhf...
I: Configuring patch...
I: Configuring xz-utils...
I: Configuring libmpc3:armhf...
I: Configuring libc-dev-bin...
I: Configuring libgdbm-compat4:armhf...
I: Configuring libc6-dev:armhf...
I: Configuring libisl19:armhf...
I: Configuring libasan4:armhf...
I: Configuring libbinutils:armhf...
I: Configuring libcilkrts5:armhf...
I: Configuring libubsan0:armhf...
I: Configuring binutils-arm-linux-gnueabihf...
I: Configuring libgcc-7-dev:armhf...
I: Configuring cpp-7...
I: Configuring libstdc++-7-dev:armhf...
I: Configuring libperl5.26:armhf...
I: Configuring binutils...
I: Configuring cpp...
I: Configuring gcc-7...
I: Configuring g++-7...
I: Configuring gcc...
I: Configuring perl...
I: Configuring g++...
I: Configuring libdpkg-perl...
I: Configuring dpkg-dev...
I: Configuring build-essential...
I: Configuring libc-bin...
I: Base system installed successfully.
I: debootstrap finished
I: copying local configuration
I: Installing apt-lines
I: Refreshing the base.tgz
I: upgrading packages
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: installing dummy policy-rc.d
Hit:1 http://cdn-fastly.deb.debian.org/debian unstable InRelease
Err:1 http://cdn-fastly.deb.debian.org/debian unstable InRelease
Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_unstable_InRelease into data and signature failed
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://cdn-fastly.deb.debian.org/debian unstable InRelease: Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_unstable_InRelease into data and signature failed
W: Failed to fetch http://deb.debian.org/debian/dists/unstable/InRelease Splitting up /var/lib/apt/lists/deb.debian.org_debian_dists_unstable_InRelease into data and signature failed
W: Some index files failed to download. They have been ignored, or old ones used instead.
Reading package lists...
Building dependency tree...
Calculating upgrade...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
build-essential is already the newest version (12.5).
dpkg-dev is already the newest version (1.19.0.5).
The following additional packages will be installed:
aptitude-common fuse libboost-filesystem1.62.0 libboost-iostreams1.62.0
libboost-system1.62.0 libc-l10n libcwidget3v5 libeatmydata1 libfakeroot
libfuse2 libsigc++-2.0-0v5 libsqlite3-0 libxapian30
Suggested packages:
aptitude-doc-en | aptitude-doc apt-xapian-index debtags tasksel
libcwidget-dev xapian-tools
Recommended packages:
libparse-debianchangelog-perl sensible-utils
The following NEW packages will be installed:
aptitude aptitude-common disorderfs eatmydata fakeroot fuse
libboost-filesystem1.62.0 libboost-iostreams1.62.0 libboost-system1.62.0
libc-l10n libcwidget3v5 libeatmydata1 libfakeroot libfuse2 libsigc++-2.0-0v5
libsqlite3-0 libxapian30 locales-all
0 upgraded, 18 newly installed, 0 to remove and 0 not upgraded.
Need to get 10.2 MB of archives.
After this operation, 157 MB of additional disk space will be used.
E: You don't have enough free space in /var/cache/apt/archives/.
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/12102 and its subdirectories
Sun 13 May 08:58:53 UTC 2018 - /srv/jenkins/bin/reproducible_setup_pbuilder.sh stopped running as /tmp/jenkins-script-tBb1Vgis, which will now be removed.
SSH EXIT CODE: 1
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list