[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_archlinux_3 #218199
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Fri Aug 7 11:28:10 BST 2020
See <https://jenkins.debian.net/job/reproducible_builder_archlinux_3/218199/display/redirect>
Changes:
------------------------------------------
[...truncated 15.56 KB...]
checking if gcc supports -Werror=main... yes
checking if gcc supports -Werror=missing-braces... yes
checking if gcc supports -Werror=sequence-point... yes
checking if gcc supports -Werror=return-type... yes
checking if gcc supports -Werror=trigraphs... yes
checking if gcc supports -Werror=array-bounds... yes
checking if gcc supports -Werror=write-strings... yes
checking if gcc supports -Werror=address... yes
checking if gcc supports -Werror=int-to-pointer-cast... yes
checking if gcc supports -Werror=pointer-to-int-cast... yes
checking if gcc supports -pedantic... yes
checking if gcc supports -Werror... yes
checking if gcc supports -Werror=attributes... yes
checking whether make supports nested variables... (cached) yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking err.h usability... yes
checking err.h presence... yes
checking for err.h... yes
checking asm/mtrr.h usability... yes
checking asm/mtrr.h presence... yes
checking for asm/mtrr.h... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating include/Makefile
config.status: creating man/Makefile
config.status: creating src/Makefile
config.status: creating scanpci/Makefile
config.status: creating pciaccess.pc
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make all-recursive
make[1]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
Making all in include
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/include'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/include'
Making all in man
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/man'
GEN scanpci.1
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/man'
Making all in src
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/src'
CC common_bridge.lo
CC common_iterator.lo
CC common_init.lo
CC common_interface.lo
CC common_io.lo
CC common_capability.lo
CC common_device_name.lo
CC common_map.lo
CC common_vgaarb.lo
CC linux_sysfs.lo
CC linux_devmem.lo
common_init.c: In function 'pci_system_cleanup':
common_init.c:110:3: warning: 'pci_device_unmap_region' is deprecated [-Wdeprecated-declarations]
110 | (void) pci_device_unmap_region( & pci_sys->devices[i].base, j );
| ^
In file included from common_init.c:38:
../include/pciaccess.h:88:18: note: declared here
88 | int __deprecated pci_device_unmap_region(struct pci_device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_write8':
linux_sysfs.c:965:6: warning: ignoring return value of 'pwrite' declared with attribute 'warn_unused_result' [-Wunused-result]
965 | pwrite(handle->fd, &data, 1, port + handle->base);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c:967:6: warning: ignoring return value of 'pwrite' declared with attribute 'warn_unused_result' [-Wunused-result]
967 | pwrite(handle->fd, &data, 1, port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_write16':
linux_sysfs.c:951:6: warning: ignoring return value of 'pwrite' declared with attribute 'warn_unused_result' [-Wunused-result]
951 | pwrite(handle->fd, &data, 2, port + handle->base);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c:953:6: warning: ignoring return value of 'pwrite' declared with attribute 'warn_unused_result' [-Wunused-result]
953 | pwrite(handle->fd, &data, 2, port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_write32':
linux_sysfs.c:937:6: warning: ignoring return value of 'pwrite' declared with attribute 'warn_unused_result' [-Wunused-result]
937 | pwrite(handle->fd, &data, 4, port + handle->base);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c:939:6: warning: ignoring return value of 'pwrite' declared with attribute 'warn_unused_result' [-Wunused-result]
939 | pwrite(handle->fd, &data, 4, port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_read8':
linux_sysfs.c:921:6: warning: ignoring return value of 'pread' declared with attribute 'warn_unused_result' [-Wunused-result]
921 | pread(handle->fd, &ret, 1, port + handle->base);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c:923:6: warning: ignoring return value of 'pread' declared with attribute 'warn_unused_result' [-Wunused-result]
923 | pread(handle->fd, &ret, 1, port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_read16':
linux_sysfs.c:904:6: warning: ignoring return value of 'pread' declared with attribute 'warn_unused_result' [-Wunused-result]
904 | pread(handle->fd, &ret, 2, port + handle->base);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c:906:6: warning: ignoring return value of 'pread' declared with attribute 'warn_unused_result' [-Wunused-result]
906 | pread(handle->fd, &ret, 2, port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_read32':
linux_sysfs.c:887:6: warning: ignoring return value of 'pread' declared with attribute 'warn_unused_result' [-Wunused-result]
887 | pread(handle->fd, &ret, 4, port + handle->base);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c:889:6: warning: ignoring return value of 'pread' declared with attribute 'warn_unused_result' [-Wunused-result]
889 | pread(handle->fd, &ret, 4, port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_enable':
linux_sysfs.c:761:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
761 | write( fd, "1", 1 );
| ^~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'pci_device_linux_sysfs_read_rom':
linux_sysfs.c:405:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
405 | write( fd, "1", 1 );
| ^~~~~~~~~~~~~~~~~~~
linux_sysfs.c:424:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
424 | write( fd, "0", 1 );
| ^~~~~~~~~~~~~~~~~~~
linux_sysfs.c: In function 'parse_separate_sysfs_files':
linux_sysfs.c:169:2: warning: ignoring return value of 'read' declared with attribute 'warn_unused_result' [-Wunused-result]
169 | read(fd, resource, 512);
| ^~~~~~~~~~~~~~~~~~~~~~~
CCLD libpciaccess.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/src'
Making all in scanpci
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/scanpci'
CC scanpci.o
CCLD scanpci
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/scanpci'
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
make[1]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
==> Entering fakeroot environment...
==> Starting package()...
Making install in include
make[1]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/include'
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/include'
make[2]: Nothing to be done for 'install-exec-am'.
/usr/sbin/mkdir -p '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/include'
/usr/bin/install -c -m 644 pciaccess.h '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/include'
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/include'
make[1]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/include'
Making install in man
make[1]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/man'
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/man'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/man'
make[1]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/man'
Making install in src
make[1]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/src'
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/src'
make[2]: Nothing to be done for 'install-data-am'.
/usr/sbin/mkdir -p '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib'
/bin/sh ../libtool --mode=install /usr/bin/install -c libpciaccess.la '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib'
libtool: install: /usr/bin/install -c .libs/libpciaccess.so.0.11.1 /tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib/libpciaccess.so.0.11.1
libtool: install: (cd /tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib && { ln -s -f libpciaccess.so.0.11.1 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.11.1 libpciaccess.so.0; }; })
libtool: install: (cd /tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib && { ln -s -f libpciaccess.so.0.11.1 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.11.1 libpciaccess.so; }; })
libtool: install: /usr/bin/install -c .libs/libpciaccess.lai /tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib/libpciaccess.la
libtool: install: /usr/bin/install -c .libs/libpciaccess.a /tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib/libpciaccess.a
libtool: install: chmod 644 /tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib/libpciaccess.a
libtool: install: ranlib /tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib/libpciaccess.a
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/src'
make[1]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/src'
Making install in scanpci
make[1]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/scanpci'
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/scanpci'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/scanpci'
make[1]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16/scanpci'
make[1]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
make[2]: Entering directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
make[2]: Nothing to be done for 'install-exec-am'.
/usr/sbin/mkdir -p '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib/pkgconfig'
/usr/bin/install -c -m 644 pciaccess.pc '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/pkg/libpciaccess/usr/lib/pkgconfig'
make[2]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
make[1]: Leaving directory '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/libpciaccess/trunk/src/libpciaccess-0.16'
==> Tidying install...
-> Removing libtool files...
-> Purging unwanted files...
-> Removing static library files...
-> Stripping unneeded symbols from binaries and libraries...
-> Compressing man and info pages...
==> Checking for packaging issues...
==> Creating package "libpciaccess"...
-> Generating .PKGINFO file...
-> Generating .BUILDINFO file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: libpciaccess 0.16-2 (Thu Sep 9 16:50:33 2021)
+ PRESULT=0
+ '[' 0 -eq 124 ']'
+ set +e
+ schroot --end-session -c archlinux-libpciaccess-archlinuxrb-build-NtCWW3jB
+ tee -a /srv/reproducible-results/archlinuxrb-build-NtCWW3jB/b1/libpciaccess/build1.log
+ PRESULT=0
+ '[' 0 -ne 0 ']'
+ false
+ set +x
ls: cannot access '/tmp/libpciaccess-archlinuxrb-build-NtCWW3jB/*/trunk/*.pkg.tar.xz': No such file or directory
Thu Sep 9 16:51:02 UTC 2021 - build #1 for libpciaccess on osuosl-build170-amd64 didn't build a package!
ls /srv/reproducible-results/archlinuxrb-build-NtCWW3jB/b1/libpciaccess/
.:
total 4
drwxr-xr-x 3 jenkins jenkins 4096 Sep 9 16:49 b1
./b1:
total 4
drwxr-xr-x 2 jenkins jenkins 4096 Sep 9 16:49 libpciaccess
./b1/libpciaccess:
total 28
-rw-r--r-- 1 jenkins jenkins 23702 Sep 9 16:50 build1.log
-rw-r--r-- 1 jenkins jenkins 7 Sep 9 16:49 build1.version
Thu Sep 9 16:51:03 UTC 2021 - build #1 for libpciaccess on osuosl-build170-amd64 done.
Thu Sep 9 16:51:03 UTC 2021 - reproducible_build_archlinux_pkg.sh stopped running as /tmp/jenkins-script-OSW69JIn, which will now be removed.
/srv/reproducible-results/archlinuxrb-build-NtCWW3jB:
total 8
drwxr-xr-x 3 jenkins jenkins 4096 Aug 7 10:28 b1
drwxr-xr-x 2 jenkins jenkins 4096 Aug 7 10:26 b2
/srv/reproducible-results/archlinuxrb-build-NtCWW3jB/b1:
total 4
drwxr-xr-x 2 jenkins jenkins 4096 Aug 7 10:28 libpciaccess
/srv/reproducible-results/archlinuxrb-build-NtCWW3jB/b1/libpciaccess:
total 28
-rw-r--r-- 1 jenkins jenkins 23702 Aug 7 10:28 build1.log
-rw-r--r-- 1 jenkins jenkins 7 Aug 7 10:28 build1.version
/srv/reproducible-results/archlinuxrb-build-NtCWW3jB/b2:
total 0
Fri Aug 7 10:28:09 UTC 2020 - build1 didn't create a package, skipping build2!
Fri Aug 7 10:28:09 UTC 2020 - https://tests.reproducible-builds.org/archlinux/extra/libpciaccess/ updated.
INSERT into results (package_id, version, status, build_date, build_duration, node1, node2, job)
VALUES ('393033', '0.16-2', 'UNKNOWN', '2020-08-07 10:26', '110', 'osuosl-build170-amd64', 'osuosl-build169-amd64', 'https://jenkins.debian.net/job/reproducible_builder_archlinux_3/218199/')
ON CONFLICT (package_id)
DO UPDATE SET version='0.16-2', status='UNKNOWN', build_date='2020-08-07 10:26', build_duration='110', node1='osuosl-build170-amd64', node2='osuosl-build169-amd64', job='https://jenkins.debian.net/job/reproducible_builder_archlinux_3/218199/' WHERE results.package_id='393033'
INSERT 0 1
INSERT INTO stats_build (name, version, suite, architecture, distribution, status, build_date, build_duration, node1, node2, job)
VALUES ('libpciaccess', '0.16-2', 'extra', 'x86_64', 3, 'UNKNOWN', '2020-08-07 10:26', '110', 'osuosl-build170-amd64', 'osuosl-build169-amd64', 'https://jenkins.debian.net/job/reproducible_builder_archlinux_3/218199/');
ERROR: duplicate key value violates unique constraint "stats_build_tmp_name_version_suite_architecture_build_date_key1"
DETAIL: Key (name, version, suite, architecture, build_date)=(libpciaccess, 0.16-2, extra, x86_64, 2020-08-07 10:26:00) already exists.
Fri Aug 7 10:28:10 UTC 2020 - /srv/reproducible-results/archlinuxrb-build-NtCWW3jB deleted.
Fri 7 Aug 10:28:10 UTC 2020 - reproducible_build_archlinux_pkg.sh stopped running as /tmp/jenkins-script-iRPQhyMr, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list