[Qa-jenkins-scm] Build failed in Jenkins: reproducible_debian_live_build_xfce_sid #388

[jenkins at jenkins.debian.net]

See <https://jenkins.debian.net/job/reproducible_debian_live_build_xfce_sid/388/display/redirect>

Changes:


------------------------------------------
[...truncated 1.96 MB...]
Setting up libassuan0:amd64 (2.5.5-5) ...
Setting up libgomp1:amd64 (12.2.0-14) ...
Setting up bzip2 (1.0.8-5+b1) ...
Setting up libfakeroot:amd64 (1.31-1) ...
Setting up libsasl2-modules-db:amd64 (2.1.28+dfsg-10) ...
Setting up fakeroot (1.31-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up liberror-perl (0.17029-2) ...
Setting up libklibc:amd64 (2.0.11-1) ...
Setting up autotools-dev (20220109.1) ...
Setting up libtirpc-dev:amd64 (1.3.3+ds-1) ...
Setting up rpcsvc-proto (1.4.3-1) ...
Setting up libswitch-perl (2.17-3) ...
Setting up make (4.3-4.1) ...
Setting up libmpfr6:amd64 (4.2.0-1) ...
Setting up gnupg-l10n (2.2.40-1) ...
Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b2) ...
Setting up xz-utils (5.4.1-0.1) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up libquadmath0:amd64 (12.2.0-14) ...
Setting up libmpc3:amd64 (1.3.1-1) ...
Setting up libatomic1:amd64 (12.2.0-14) ...
Setting up libio-html-perl (1.004-3) ...
Setting up patch (2.7.6-7) ...
Setting up autopoint (0.21-11) ...
Setting up libb-hooks-op-check-perl:amd64 (0.22-2+b1) ...
Setting up libipc-run-perl (20220807.0-1) ...
Setting up libdpkg-perl (1.21.20) ...
Setting up libsasl2-2:amd64 (2.1.28+dfsg-10) ...
Setting up autoconf (2.71-3) ...
Setting up libtimedate-perl (2.3300-2) ...
Setting up libregexp-ipv6-perl (0.03-3) ...
Setting up libubsan1:amd64 (12.2.0-14) ...
Setting up dwz (0.15-1) ...
Setting up libcrypt-dev:amd64 (1:4.4.33-2) ...
Setting up libasan8:amd64 (12.2.0-14) ...
Setting up libuchardet0:amd64 (0.0.7-1) ...
Setting up libnsl2:amd64 (1.3.0-2) ...
Setting up gpgconf (2.2.40-1) ...
Setting up librole-tiny-perl (2.002004-1) ...
Setting up libsub-override-perl (0.09-4) ...
Setting up git-man (1:2.39.1-0.1) ...
Setting up libssh2-1:amd64 (1.10.0-3+b1) ...
Setting up libsub-quote-perl (2.006008-1) ...
Setting up libclass-xsaccessor-perl (1.19-4+b1) ...
Setting up libtsan2:amd64 (12.2.0-14) ...
Setting up libfile-dirlist-perl (0.05-3) ...
Setting up libbinutils:amd64 (2.40-2) ...
Setting up libisl23:amd64 (0.25-1) ...
Setting up libc-dev-bin (2.36-8) ...
Setting up libfile-homedir-perl (1.006-2) ...
Setting up klibc-utils (2.0.11-1) ...
No diversion 'diversion of /usr/share/initramfs-tools/hooks/klibc to /usr/share/initramfs-tools/hooks/klibc^i-t by klibc-utils', none removed.
Setting up openssl (3.0.8-1) ...
Setting up libxml2:amd64 (2.9.14+dfsg-1.1+b3) ...
Setting up libcc1-0:amd64 (12.2.0-14) ...
Setting up liburi-perl (5.17-1) ...
Setting up gpg (2.2.40-1) ...
Setting up libfile-touch-perl (0.12-2) ...
Setting up liblsan0:amd64 (12.2.0-14) ...
Setting up libitm1:amd64 (12.2.0-14) ...
Setting up gnupg-utils (2.2.40-1) ...
Setting up libctf0:amd64 (2.40-2) ...
Setting up libnet-ssleay-perl:amd64 (1.92-2+b1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up pinentry-curses (1.2.1-1) ...
Setting up libfile-stripnondeterminism-perl (1.13.1-1) ...
Setting up libhttp-date-perl (6.05-2) ...
Setting up cpp-12 (12.2.0-14) ...
Setting up gettext (0.21-11) ...
Setting up gpg-agent (2.2.40-1) ...
Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket → /usr/lib/systemd/user/gpg-agent-browser.socket.
Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket → /usr/lib/systemd/user/gpg-agent-extra.socket.
Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket → /usr/lib/systemd/user/gpg-agent-ssh.socket.
Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent.socket → /usr/lib/systemd/user/gpg-agent.socket.
Setting up libfile-listing-perl (6.15-1) ...
Setting up libpython3.11-stdlib:amd64 (3.11.2-4) ...
Setting up gpgsm (2.2.40-1) ...
Setting up libnet-http-perl (6.22-1) ...
Setting up libdevel-callchecker-perl:amd64 (0.008-2) ...
Setting up libldap-2.5-0:amd64 (2.5.13+dfsg-5) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up patchutils (0.4.2-1) ...
Setting up dirmngr (2.2.40-1) ...
Created symlink /etc/systemd/user/sockets.target.wants/dirmngr.socket → /usr/lib/systemd/user/dirmngr.socket.
Setting up ca-certificates (20211016) ...
Updating certificates in /etc/ssl/certs...
127 added, 0 removed; done.
Setting up libgprofng0:amd64 (2.40-2) ...
Setting up libgcc-12-dev:amd64 (12.2.0-14) ...
Setting up gpg-wks-server (2.2.40-1) ...
Setting up dh-strip-nondeterminism (1.13.1-1) ...
Setting up libwww-robotrules-perl (6.02-1) ...
Setting up libnsl-dev:amd64 (1.3.0-2) ...
Setting up groff-base (1.22.4-9) ...
Setting up cpp (4:12.2.0-3) ...
Setting up libhtml-parser-perl:amd64 (3.81-1) ...
Setting up libc6-dev:amd64 (2.36-8) ...
Setting up initramfs-tools-core (0.142) ...
Setting up libio-socket-ssl-perl (2.081-2) ...
Setting up libpython3-stdlib:amd64 (3.11.1-3) ...
Setting up libhttp-message-perl (6.44-1) ...
Setting up binutils-x86-64-linux-gnu (2.40-2) ...
Setting up python3.11 (3.11.2-4) ...
Setting up libhttp-negotiate-perl (6.01-2) ...
Setting up initramfs-tools (0.142) ...
update-initramfs: deferring update (trigger activated)
Setting up gpg-wks-client (2.2.40-1) ...
Setting up libhttp-cookies-perl (6.10-1) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libhtml-tree-perl (5.07-3) ...
Setting up libparams-classify-perl:amd64 (0.015-2+b1) ...
Setting up libcurl3-gnutls:amd64 (7.87.0-2) ...
Setting up python3 (3.11.1-3) ...
Setting up binutils (2.40-2) ...
Setting up linux-image-6.1.0-4-amd64 (6.1.11-1) ...
I: /vmlinuz.old is now a symlink to boot/vmlinuz-6.1.0-4-amd64
I: /initrd.img.old is now a symlink to boot/initrd.img-6.1.0-4-amd64
I: /vmlinuz is now a symlink to boot/vmlinuz-6.1.0-4-amd64
I: /initrd.img is now a symlink to boot/initrd.img-6.1.0-4-amd64
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-6.1.0-4-amd64
W: No zstd in /usr/bin:/sbin:/bin, using gzip
W: Possible missing firmware /lib/firmware/isci/isci_firmware.bin for module isci
Setting up man-db (2.11.2-1) ...
Building database of manual pages ...
Created symlink /etc/systemd/system/timers.target.wants/man-db.timer → /lib/systemd/system/man-db.timer.
Setting up dpkg-dev (1.21.20) ...
Setting up gcc-12 (12.2.0-14) ...
Setting up libmodule-runtime-perl (0.016-2) ...
Setting up git (1:2.39.1-0.1) ...
Setting up gnupg (2.2.40-1) ...
Setting up libtool (2.4.7-5) ...
Setting up libimport-into-perl (1.002005-2) ...
Setting up libmoo-perl (2.005005-1) ...
Setting up linux-image-amd64 (6.1.11-1) ...
Setting up gcc (4:12.2.0-3) ...
Setting up dh-autoreconf (20) ...
Setting up debhelper (13.11.4) ...
Setting up equivs (2.3.1) ...
Setting up liblwp-protocol-https-perl (6.10-1) ...
Setting up libwww-perl (6.67-1) ...
Setting up libdigest-md5-file-perl (0.08-1.1) ...
Setting up devscripts (2.23.1) ...
Processing triggers for libc-bin (2.36-8) ...
Processing triggers for systemd (252.5-2) ...
Processing triggers for ca-certificates (20211016) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Processing triggers for initramfs-tools (0.142) ...
update-initramfs: Generating /boot/initrd.img-6.1.0-4-amd64
W: No zstd in /usr/bin:/sbin:/bin, using gzip
W: Possible missing firmware /lib/firmware/isci/isci_firmware.bin for module isci
P: using debian-installer from git version 99d430b5421dfdc6014c8236bb691789f3ebf6f4_2023-02-07T14:59:28+01:00
dpkg-buildpackage: info: source package debian-installer-build-deps
dpkg-buildpackage: info: source version 20230207
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Equivs Dummy Package Generator <root at localhost.localdomain>
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
 debian/rules clean
dh clean
   dh_clean
 debian/rules binary
dh binary
   dh_update_autotools_config
   dh_autoreconf
   create-stamp debian/debhelper-build-stamp
   dh_prep
   dh_auto_install --destdir=debian/debian-installer-build-deps/
   dh_install
   dh_installdocs
   dh_installchangelogs
   dh_perl
   dh_link
   dh_strip_nondeterminism
   dh_compress
   dh_fixperms
   dh_missing
   dh_dwz
   dh_strip
   dh_makeshlibs
   dh_shlibdeps
   dh_installdeb
   dh_gencontrol
   dh_md5sums
   dh_builddeb
dpkg-deb: building package 'debian-installer-build-deps' in '../debian-installer-build-deps_20230207_amd64.deb'.
 dpkg-genbuildinfo --build=binary -O../debian-installer-build-deps_20230207_amd64.buildinfo
 dpkg-genchanges --build=binary -O../debian-installer-build-deps_20230207_amd64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)

The package has been created.
Attention, the package has been created in the current directory,
not in ".." as indicated by the message above!
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 libalien-wxwidgets-perl : Depends: libwxgtk3.2-dev (< 3.2.2~) but 3.2.2+dfsg-1 is to be installed
                           Depends: libwxgtk-media3.2-dev (< 3.2.2~) but 3.2.2+dfsg-1 is to be installed
E: Unable to correct problems, you have held broken packages.
E: An unexpected failure occurred, exiting...
P: Begin unmounting filesystems...
P: Saving caches...
###########################################################################################

Tue Feb 14 15:15:05 UTC 2023 - Warning: lb build failed with 123. The latest snapshot might not be complete (yet). Try re-running the script with SNAPSHOT_TIMESTAMP=20230212T030435Z.

###########################################################################################

Tue Feb 14 15:15:05 UTC 2023 - Generating summary.txt 

###########################################################################################

Tue Feb 14 15:15:05 UTC 2023 - Cleanup 

###########################################################################################

Tue Feb 14 15:15:05 UTC 2023 - Publishing results: 

###########################################################################################

Tue Feb 14 15:15:05 UTC 2023 - Error: Something went wrong.

====================================================================================
Tue Feb 14 15:15:07 UTC 2023 - running /srv/jenkins/bin/reproducible_debian_live_sync_result.sh (for job publish) on jenkins, called using "" as arguments.
Tue Feb 14 15:15:07 UTC 2023 - actually running "reproducible_debian_live_sync_result.sh" (md5sum f50e0aa6845a2f032ae34e83c310eae2) as "/tmp/jenkins-script-3zOQDFbF"

$ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING

Tue Feb 14 15:15:07 UTC 2023 - Starting to sync Environment to 'xfce-sid-env.txt'.
Tue Feb 14 15:15:10 UTC 2023 - enjoy https://tests.reproducible-builds.org/debian_live_build/xfce-sid-env.txt
Tue Feb 14 15:15:10 UTC 2023 - reproducible_debian_live_sync_result.sh stopped running as /tmp/jenkins-script-3zOQDFbF, removing.
Tue Feb 14 15:15:13 UTC 2023 - reproducible_debian_live_build.sh stopped running as /tmp/jenkins-script-CYYg2W2a, removing.

SSH EXIT CODE: 99
Build step 'Execute shell' marked build as failure