[Git][qa/jenkins.debian.net][master] 2 commits: drop all kfreebsd related tests now that it's officially dead
Holger Levsen (@holger)
gitlab at salsa.debian.org
Fri Jul 14 20:13:32 BST 2023
Holger Levsen pushed to branch master at Debian QA / jenkins.debian.net
Commits:
b987d45d by Holger Levsen at 2023-07-14T21:12:53+02:00
drop all kfreebsd related tests now that it's officially dead
see https://lists.debian.org/debian-devel/2023/07/msg00176.html
Signed-off-by: Holger Levsen <holger at layer-acht.org>
- - - - -
f76fee73 by Holger Levsen at 2023-07-14T21:13:12+02:00
reproducible OpenWrt: try harder to properly cleanup afterwards
Signed-off-by: Holger Levsen <holger at layer-acht.org>
- - - - -
8 changed files:
- bin/common-functions.sh
- bin/reproducible_build.sh
- bin/reproducible_installed_on_debian.org
- bin/reproducible_openwrt.sh
- − d-i-preseed-cfgs/debian_jessie_kfreebsd_xfce_preseed.cfg
- − d-i-preseed-cfgs/debian_sid_daily_kfreebsd_xfce_preseed.cfg
- − d-i-preseed-cfgs/debian_wheezy_kfreebsd_xfce_preseed.cfg
- job-cfg/d-i-overview.yaml
Changes:
=====================================
bin/common-functions.sh
=====================================
@@ -233,7 +233,7 @@ jenkins_zombie_check() {
# related however is that I issued a reboot (via running
# /sbin/reboot) right before the zombies appeared...
#
- ZOMBIES="$(ls -1d /var/lib/jenkins/jobs/* | grep -E 'strip-nondeterminism|reproducible_(builder_(amd64|i386|armhf|arm64)|setup_(pbuilder|schroot)_testing)|chroot-installation_wheezy|aptdpkg|stretch_install_education-thin-client-server|jessie_multiarch_versionskew|dpkg_stretch_find_trigger_cycles|dpkg_buster_find_trigger_cycles|sid_install_education-services|buster_install_education-services|lvc|chroot-installation_stretch_.*_upgrade_to_sid|chroot-installation_buster_.*_upgrade_to_sid|piuparts_.*_(jessie|stretch|buster|bullseye)|lintian-tests_stretch|lintian-tests_buster|lintian-tests_buster-backports|lintian-tests_bullseye|udd_stretch|d-i_pu-build|debsums-tests_stretch|debian-archive-keyring-tests_stretch|debian-archive-keyring-tests_buster|debian-archive-keyring-tests_bullseye|chroot-installation_jessie|chroot-installation_.*education-lang-|kirkwoot|rebootstrap_.*_gcc[5-9]($|_)|rebootstrap_.*_gcc1[01]($|_)|brcm47xx|rebootstrap_kfreebsd|diffoscope_from_git_|disorderfs_from_git_master|diffoscope_pypi|diffoscope_freebsd|diffoscope_netbsd|diffoscope_macports|diffoscope_archlinux|openwrt-target-ath97|profitbricks|pool_buildinfos_suites|g-i-installation|reproducible_compare_Debian_sha1sums|bbx15|cb3a|ff2a|ff2b|jtk1a|jtk1b|odxu4a|odxu4b|odu3a|opi2a|opi2c|p64b|p64c|ar71xx|reproducible_debian_live_build$|chroot-installation_stretch|chroot-installation_bullseye*upgrade_to_sid|rebuilder_prototype|osuosl167|osuosl168|osuosl169|osuosl170|osuosl171|osuosl172|osuosl173|osuosl174|osuosl184fakeroot-foreign|fdroid|reproducible_.*_reproducible?$|health_check_amd64_snapshot|reproducible_.*_stretch_.*|buster_diffoscope_amd64_osuosl3|chroot-installation_buster|udd_buster_multiarch_versionskew|disorderfs_from_git|reprotest_from_git|diffoscope_from_git|reproducible_create_meta_pkg_sets$|reproducible_scheduler$' || true)"
+ ZOMBIES="$(ls -1d /var/lib/jenkins/jobs/* | grep -E 'strip-nondeterminism|reproducible_(builder_(amd64|i386|armhf|arm64)|setup_(pbuilder|schroot)_testing)|chroot-installation_wheezy|aptdpkg|stretch_install_education-thin-client-server|jessie_multiarch_versionskew|dpkg_stretch_find_trigger_cycles|dpkg_buster_find_trigger_cycles|sid_install_education-services|buster_install_education-services|lvc|chroot-installation_stretch_.*_upgrade_to_sid|chroot-installation_buster_.*_upgrade_to_sid|piuparts_.*_(jessie|stretch|buster|bullseye)|lintian-tests_stretch|lintian-tests_buster|lintian-tests_buster-backports|lintian-tests_bullseye|udd_stretch|d-i_pu-build|debsums-tests_stretch|debian-archive-keyring-tests_stretch|debian-archive-keyring-tests_buster|debian-archive-keyring-tests_bullseye|chroot-installation_jessie|chroot-installation_.*education-lang-|kirkwoot|rebootstrap_.*_gcc[5-9]($|_)|rebootstrap_.*_gcc1[01]($|_)|brcm47xx|rebootstrap_kfreebsd|diffoscope_from_git_|disorderfs_from_git_master|diffoscope_pypi|diffoscope_freebsd|diffoscope_netbsd|diffoscope_macports|diffoscope_archlinux|openwrt-target-ath97|profitbricks|pool_buildinfos_suites|g-i-installation|reproducible_compare_Debian_sha1sums|bbx15|cb3a|ff2a|ff2b|jtk1a|jtk1b|odxu4a|odxu4b|odu3a|opi2a|opi2c|p64b|p64c|ar71xx|reproducible_debian_live_build$|chroot-installation_stretch|chroot-installation_bullseye*upgrade_to_sid|rebuilder_prototype|osuosl167|osuosl168|osuosl169|osuosl170|osuosl171|osuosl172|osuosl173|osuosl174|osuosl184fakeroot-foreign|fdroid|reproducible_.*_reproducible?$|health_check_amd64_snapshot|reproducible_.*_stretch_.*|buster_diffoscope_amd64_osuosl3|chroot-installation_buster|udd_buster_multiarch_versionskew|disorderfs_from_git|reprotest_from_git|diffoscope_from_git|reproducible_create_meta_pkg_sets$|reproducible_scheduler$|d-i_overview_kfreebsd' || true)"
if [ -n "$ZOMBIES" ] ; then
DIRTY=true
figlet 'zombies!!!'
=====================================
bin/reproducible_build.sh
=====================================
@@ -941,14 +941,6 @@ share_buildinfo() {
# Submit the -buildinfo files to third-party archives:
log_info "Submitting .buildinfo files to external archives:"
- # Disabled as that mail address bounces.
- ## buildinfo.kfreebsd.eu administered by Steven Chamberlain <steven at pyro.eu.org>
- #for X in b1 b2
- #do
- # mail -s "${X}/$BUILDINFO_SIGNED" submit at buildinfo.kfreebsd.eu < ./${X}/$BUILDINFO_SIGNED || log_error "Could not submit ${X}/$BUILDINFO_SIGNED to submit at buildinfo.kfreebsd.eu."
- #done
- #log_info "Done submitting .buildinfo files to submit at buildinfo.kfreebsd.eu."
-
# buildinfo.debian.net administred by Chris Lamb <lamby at debian.org>
local TMPFILE=$(mktemp --tmpdir=$TMPDIR)
for X in b1 b2
=====================================
bin/reproducible_installed_on_debian.org
=====================================
@@ -629,11 +629,6 @@ kbdcontrol
kcc
keepalived
keyboard-configuration
-kfreebsd-image-10.1-0-686
-kfreebsd-image-10.1-0-amd64
-kfreebsd-image-10-686
-kfreebsd-image-10-amd64
-kfreebsd-kernel-headers
kgb-client
kldutils
klibc-utils
=====================================
bin/reproducible_openwrt.sh
=====================================
@@ -53,7 +53,7 @@ node_cleanup_tmpdirs() {
echo "$(date -u) - deleting \$TMPBUILDDIR $TMPBUILDDIR"
if [ "$RUN" = "b2" ]; then
- umount "$TMPBUILDDIR/build"
+ umount -l "$TMPBUILDDIR/build"
fi
rm -rf "$TMPBUILDDIR"
=====================================
d-i-preseed-cfgs/debian_jessie_kfreebsd_xfce_preseed.cfg deleted
=====================================
@@ -1 +0,0 @@
-debian_sid_daily_kfreebsd_xfce_preseed.cfg
\ No newline at end of file
=====================================
d-i-preseed-cfgs/debian_sid_daily_kfreebsd_xfce_preseed.cfg deleted
=====================================
@@ -1,361 +0,0 @@
-### Contents of the preconfiguration file for Debian
-### Localization
-# Preseeding only locale sets language, country and locale.
-d-i debian-installer/locale string en_US
-
-# The values can also be preseeded individually for greater flexibility.
-#d-i debian-installer/language string en
-#d-i debian-installer/country string NL
-#d-i debian-installer/locale string en_GB.UTF-8
-# Optionally specify additional locales to be generated.
-#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8
-
-# Keyboard selection.
-d-i keyboard-configuration/xkb-keymap select us
-# d-i keyboard-configuration/toggle select No toggling
-
-### Network configuration
-# Disable network configuration entirely. This is useful for cdrom
-# installations on non-networked devices where the network questions,
-# warning and long timeouts are a nuisance.
-#d-i netcfg/enable boolean false
-
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# To pick a particular interface instead:
-#d-i netcfg/choose_interface select eth1
-
-# To set a different link detection timeout (default is 3 seconds).
-# Values are interpreted as seconds.
-#di netcfg/link_detection_timeout string 10
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-
-# If you prefer to configure the network manually, uncomment this line and
-# the static network configuration below.
-#d-i netcfg/disable_dhcp boolean true
-
-# If you want the preconfiguration file to work on systems both with and
-# without a dhcp server, uncomment these lines and the static network
-# configuration below.
-#d-i netcfg/dhcp_failed note
-#d-i netcfg/dhcp_options select Configure network manually
-
-# Static network configuration.
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
-d-i netcfg/get_hostname string unassigned-hostname
-d-i netcfg/get_domain string unassigned-domain
-
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
-
-# If non-free firmware is needed for the network or other hardware, you can
-# configure the installer to always try to load it, without prompting. Or
-# change to false to disable asking.
-#d-i hw-detect/load_firmware boolean true
-
-### Network console
-# Use the following settings if you wish to make use of the network-console
-# component for remote installation over SSH. This only makes sense if you
-# intend to perform the remainder of the installation manually.
-#d-i anna/choose_modules string network-console
-#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
-#d-i network-console/password password r00tme
-#d-i network-console/password-again password r00tme
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-d-i mirror/country string manual
-d-i mirror/http/hostname string deb.debian.org
-d-i mirror/http/directory string /debian
-d-i mirror/http/proxy string http://10.0.2.1:3128/
-
-# Suite to install.
-#d-i mirror/suite string testing
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string testing
-
-### Account setup
-# Skip creation of a root account (normal user account will be able to
-# use sudo).
-#d-i passwd/root-login boolean false
-# Alternatively, to skip creation of a normal user account.
-#d-i passwd/make-user boolean false
-
-# Root password, either in clear text
-d-i passwd/root-password password r00tme
-d-i passwd/root-password-again password r00tme
-# or encrypted using an MD5 hash.
-#d-i passwd/root-password-crypted password [MD5 hash]
-
-# To create a normal user account.
-d-i passwd/user-fullname string Jenkins Testuser
-d-i passwd/username string jenkins
-# Normal user's password, either in clear text
-d-i passwd/user-password password insecure
-d-i passwd/user-password-again password insecure
-# or encrypted using an MD5 hash.
-#d-i passwd/user-password-crypted password [MD5 hash]
-# Create the first user with the specified UID instead of the default.
-#d-i passwd/user-uid string 1010
-
-# The user account will be added to some standard initial groups. To
-# override that, use this.
-#d-i passwd/user-default-groups string audio cdrom video
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
-# You may set this to any valid setting for $TZ; see the contents of
-# /usr/share/zoneinfo/ for valid values.
-d-i time/zone string US/Eastern
-
-# Controls whether to use NTP to set the clock during the install
-d-i clock-setup/ntp boolean true
-# NTP server to use. The default is almost always fine here.
-#d-i clock-setup/ntp-server string ntp.example.com
-
-### Partitioning
-## Partitioning example
-# If the system has free space you can choose to only partition that space.
-# This is only honoured if partman-auto/method (below) is not set.
-#d-i partman-auto/init_automatically_partition select biggest_free
-
-# Alternatively, you may specify a disk to partition. If the system has only
-# one disk the installer will default to using that, but otherwise the device
-# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
-# /dev/sda, and not e.g. /dev/discs/disc0/disc).
-# For example, to use the first SCSI/SATA hard disk:
-#d-i partman-auto/disk string /dev/sda
-# In addition, you'll need to specify the method to use.
-# The presently available methods are:
-# - regular: use the usual partition types for your architecture
-# - lvm: use LVM to partition the disk
-# - crypto: use LVM within an encrypted partition
-d-i partman-auto/method string regular
-
-# You can choose one of the three predefined partitioning recipes:
-# - atomic: all files in one partition
-# - home: separate /home partition
-# - multi: separate /home, /usr, /var, and /tmp partitions
-d-i partman-auto/choose_recipe select multi
-
-# Or provide a recipe of your own...
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string \
-# boot-root :: \
-# 40 50 100 ext3 \
-# $primary{ } $bootable{ } \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ /boot } \
-# . \
-# 500 10000 1000000000 ext3 \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ / } \
-# . \
-# 64 512 300% linux-swap \
-# method{ swap } format{ } \
-# .
-
-# The full recipe format is documented in the file partman-auto-recipe.txt
-# included in the 'debian-installer' package or available from D-I source
-# repository. This also documents how to specify settings such as file
-# system labels, volume group names and which physical devices to include
-# in a volume group.
-
-# This makes partman automatically partition without confirmation, provided
-# that you told it what to do using one of the methods above.
-d-i partman-partitioning/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-## Partitioning using RAID
-# The method should be set to "raid".
-#d-i partman-auto/method string raid
-# Specify the disks to be partitioned. They will all get the same layout,
-# so this will only work if the disks are the same size.
-#d-i partman-auto/disk string /dev/sda /dev/sdb
-
-# Next you need to specify the physical partitions that will be used.
-#d-i partman-auto/expert_recipe string \
-# multiraid :: \
-# 1000 5000 4000 raid \
-# $primary{ } method{ raid } \
-# . \
-# 64 512 300% raid \
-# method{ raid } \
-# . \
-# 500 10000 1000000000 raid \
-# method{ raid } \
-# .
-
-# Last you need to specify how the previously defined partitions will be
-# used in the RAID setup. Remember to use the correct partition numbers
-# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
-# devices are separated using "#".
-# Parameters are:
-# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
-# <devices> <sparedevices>
-
-#d-i partman-auto-raid/recipe string \
-# 1 2 0 ext3 / \
-# /dev/sda1#/dev/sdb1 \
-# . \
-# 1 2 0 swap - \
-# /dev/sda5#/dev/sdb5 \
-# . \
-# 0 2 0 ext3 /home \
-# /dev/sda6#/dev/sdb6 \
-# .
-
-# For additional information see the file partman-auto-raid-recipe.txt
-# included in the 'debian-installer' package or available from D-I source
-# repository.
-
-# This makes partman automatically partition without confirmation.
-d-i partman-md/confirm boolean true
-d-i partman-partitioning/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-## Controlling how partitions are mounted
-# The default is to mount by UUID, but you can also choose "traditional" to
-# use traditional device names, or "label" to try filesystem labels before
-# falling back to UUIDs.
-#d-i partman/mount_style select uuid
-
-### Base system installation
-# Configure APT to not install recommended packages by default. Use of this
-# option can result in an incomplete system and should only be used by very
-# experienced users.
-#d-i base-installer/install-recommends boolean false
-
-# The kernel image (meta) package to be installed; "none" can be used if no
-# kernel is to be installed.
-#d-i base-installer/kernel/image string linux-image-2.6-486
-
-### Apt setup
-# You can choose to install non-free and contrib software.
-#d-i apt-setup/non-free boolean true
-#d-i apt-setup/contrib boolean true
-# Uncomment this if you don't want to use a network mirror.
-#d-i apt-setup/use_mirror boolean false
-# Select which update services to use; define the mirrors to be used.
-# Values shown below are the normal defaults.
-#d-i apt-setup/services-select multiselect security, volatile
-#d-i apt-setup/security_host string security.debian.org
-#d-i apt-setup/volatile_host string volatile.debian.org
-
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-# http://local.server/debian stable main
-#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
-#d-i apt-setup/local0/source boolean true
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
-
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated boolean true
-
-### Package selection
-#tasksel tasksel/first multiselect standard, web-server
-tasksel tasksel/first multiselect standard, xfce-desktop
-
-# Individual additional packages to install
-#d-i pkgsel/include string openssh-server build-essential
-# Whether to upgrade packages after debootstrap.
-# Allowed values: none, safe-upgrade, full-upgrade
-#d-i pkgsel/upgrade select none
-
-# Some versions of the installer can report back on what software you have
-# installed, and what software you use. The default is not to report back,
-# but sending reports helps the project determine what software is most
-# popular and include it on CDs.
-#popularity-contest popularity-contest/participate boolean false
-
-# install grub on the first disk found
-d-i grub-installer/bootdev string /dev/ada0
-
-### Finishing up the installation
-# During installations from serial console, the regular virtual consoles
-# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
-# line to prevent this.
-#d-i finish-install/keep-consoles boolean true
-
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-# This is how to make the installer shutdown when finished, but not
-# reboot into the installed system.
-#d-i debian-installer/exit/halt boolean true
-# This will power off the machine instead of just halting it.
-d-i debian-installer/exit/poweroff boolean true
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-# debconf-get-selections --installer > file
-# debconf-get-selections >> file
-
-
-#### Advanced options
-### Running custom commands during the installation
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preconfiguration file like this one. Only use preconfiguration files from
-# trusted locations! To drive that home, and because it's generally useful,
-# here's a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-# This command is run immediately before the partitioner starts. It may be
-# useful to apply dynamic partitioner preseeding that depends on the state
-# of the disks (which may not be visible when preseed/early_command runs).
-#d-i partman/early_command \
-# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory. You can chroot to /target and use it
-# directly, or use the apt-install and in-target commands to easily install
-# packages and run commands in the target system.
-#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
-
=====================================
d-i-preseed-cfgs/debian_wheezy_kfreebsd_xfce_preseed.cfg deleted
=====================================
@@ -1 +0,0 @@
-debian_sid_daily_kfreebsd_xfce_preseed.cfg
\ No newline at end of file
=====================================
job-cfg/d-i-overview.yaml
=====================================
@@ -51,8 +51,6 @@
- armhf
- hurd-i386
- i386
- - kfreebsd-amd64
- - kfreebsd-i386
- mips
- mipsel
- ppc64el
View it on GitLab: https://salsa.debian.org/qa/jenkins.debian.net/-/compare/520b9cf44016e2df29c81d35c5a7e802f2fa7c02...f76fee7358ccae5d28b0ea0f9d2eee1384ddc033
--
View it on GitLab: https://salsa.debian.org/qa/jenkins.debian.net/-/compare/520b9cf44016e2df29c81d35c5a7e802f2fa7c02...f76fee7358ccae5d28b0ea0f9d2eee1384ddc033
You're receiving this email because of your account on salsa.debian.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/qa-jenkins-scm/attachments/20230714/001357e7/attachment-0001.htm>
More information about the Qa-jenkins-scm
mailing list