[Git][qa/jenkins.debian.net][master] reproducible armhf nodes: Use default sshd_config, to allow use of

[Vagrant Cascadian (@vagrant)]

Vagrant Cascadian pushed to branch master at Debian QA / jenkins.debian.net


Commits:
5484a9db by Vagrant Cascadian at 2024-02-08T12:00:14-08:00
reproducible armhf nodes: Use default sshd_config, to allow use of
sshd_config.d for differences.

- - - - -


17 changed files:

- − hosts/cbxi4a-armhf-rb/etc/ssh/sshd_config
- − hosts/cbxi4b-armhf-rb/etc/ssh/sshd_config
- − hosts/cbxi4pro0-armhf-rb/etc/ssh/sshd_config
- − hosts/ff4a-armhf-rb/etc/ssh/sshd_config
- − hosts/ff64a-armhf-rb/etc/ssh/sshd_config
- − hosts/jtx1a-armhf-rb/etc/ssh/sshd_config
- − hosts/jtx1b-armhf-rb/etc/ssh/sshd_config
- − hosts/jtx1c-armhf-rb/etc/ssh/sshd_config
- − hosts/virt32a-armhf-rb/etc/ssh/sshd_config
- − hosts/virt32b-armhf-rb/etc/ssh/sshd_config
- − hosts/virt32c-armhf-rb/etc/ssh/sshd_config
- − hosts/virt32z-armhf-rb/etc/ssh/sshd_config
- − hosts/virt64a-armhf-rb/etc/ssh/sshd_config
- − hosts/virt64b-armhf-rb/etc/ssh/sshd_config
- − hosts/virt64c-armhf-rb/etc/ssh/sshd_config
- − hosts/virt64z-armhf-rb/etc/ssh/sshd_config
- − hosts/wbq0-armhf-rb/etc/ssh/sshd_config


Changes:

=====================================
hosts/cbxi4a-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2239
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/cbxi4b-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2240
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/cbxi4pro0-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2226
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/ff4a-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2241
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/ff64a-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2250
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/jtx1a-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2249
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/jtx1b-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2253
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/jtx1c-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2254
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt32a-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2273
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt32b-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2275
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt32c-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2278
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt32z-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2267
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt64a-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2272
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt64b-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2274
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt64c-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2277
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/virt64z-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2268
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server


=====================================
hosts/wbq0-armhf-rb/etc/ssh/sshd_config deleted
=====================================
@@ -1,108 +0,0 @@
-# Package generated configuration file
-# See the sshd_config(5) manpage for details
-
-# What ports, IPs and protocols we listen for
-Port 22
-Port 2225
-#AddressFamily any
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_ecdsa_key
-HostKey /etc/ssh/ssh_host_ed25519_key
-
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2n
-PermitRootLogin prohibit-password
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-PubkeyAuthentication yes
-
-AuthorizedKeysFile /var/lib/misc/userkeys/%u %h/.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication no
-#PermitEmptyPasswords no
-
-# Change to yes to enable challenge-response passwords (beware issues with
-# some PAM modules and threads)
-ChallengeResponseAuthentication no
-
-# Change to no to disable tunnelled clear text passwords
-PasswordAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-#GSSAPIStrictAcceptorCheck yes
-#GSSAPIKeyExchange no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# Allow client to pass locale environment variables
-AcceptEnv LANG LC_*
-
-# override default of no subsystems
-Subsystem       sftp    /usr/lib/openssh/sftp-server



View it on GitLab: https://salsa.debian.org/qa/jenkins.debian.net/-/commit/5484a9db0c5871fcf1fc942b2242805d6980e4e2

-- 
View it on GitLab: https://salsa.debian.org/qa/jenkins.debian.net/-/commit/5484a9db0c5871fcf1fc942b2242805d6980e4e2
You're receiving this email because of your account on salsa.debian.org.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/qa-jenkins-scm/attachments/20240208/a2b75701/attachment-0001.htm>