Build failed in Jenkins: reproducible_debian_live_build_lxqt_sid #1612
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Wed Aug 5 16:25:40 BST 2026
See <https://jenkins.debian.net/job/reproducible_debian_live_build_lxqt_sid/1612/display/redirect>
Changes:
------------------------------------------
[...truncated 2.35 MiB...]
Building dependency tree...
Reading state information...
Solving dependencies...
The following additional packages will be installed:
debconf gcc-16-base kmod libc-gconv-modules-extra libc6 libcrypt1
libefivar1t64 libgcc-s1 libkeyutils1 libkmod2 libssl3t64 libzstd1 mokutil
openssl openssl-provider-legacy zlib1g
Suggested packages:
debconf-doc debconf-kde-helper debconf-utils libgtk3-perl libnet-ldap-perl
libterm-readline-gnu-perl perl whiptail | dialog glibc-doc libc-l10n locales
libnss-nis ca-certificates
Recommended packages:
apt | apt-utils debconf-i18n libidn2-0
The following NEW packages will be installed:
debconf gcc-16-base kmod libc-gconv-modules-extra libc6 libcrypt1
libefivar1t64 libgcc-s1 libkeyutils1 libkmod2 libssl3t64 libzstd1 mokutil
openssl openssl-provider-legacy shim-signed-common zlib1g
0 upgraded, 17 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/8211 kB of archives.
After this operation, 27.9 MB of additional disk space will be used.
Download complete and in download only mode
Reading package lists...
Building dependency tree...
Reading state information...
Solving dependencies...
The following NEW packages will be installed:
shim-unsigned
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/456 kB of archives.
After this operation, 2143 kB of additional disk space will be used.
Download complete and in download only mode
Reading package lists...
Building dependency tree...
Reading state information...
Solving dependencies...
The following additional packages will be installed:
cryptsetup-bin debconf dmsetup gcc-16-base libblkid1
libc-gconv-modules-extra libc6 libcryptsetup12 libdevmapper1.02.1 libgcc-s1
libjson-c5 libmount1 libpcre2-8-0 libpopt0 libselinux1 libssl3t64
libsystemd-shared libsystemd0 libudev1 libuuid1 libzstd1
openssl-provider-legacy systemd zlib1g
Suggested packages:
cryptsetup-initramfs dosfstools keyutils liblocale-gettext-perl debconf-doc
debconf-kde-helper debconf-utils libgtk3-perl libnet-ldap-perl
libterm-readline-gnu-perl perl whiptail | dialog glibc-doc libc-l10n locales
libnss-nis libarchive13t64 libbz2-1.0 libcurl4t64 libdw1t64 libelf1t64
libfdisk1 libfido2-1 libgcrypt20 libidn2-0 liblz4-1 liblzma5
libmicrohttpd12t64 libp11-kit0 libpwquality1 libqrencode4
libtss2-esys-3.0.2-0t64 libtss2-mu-4.0.1-0t64 libtss2-rc0t64
libtss2-tcti-device0t64 uuid-runtime systemd-container systemd-homed
systemd-imds systemd-userdbd systemd-boot systemd-report systemd-resolved
systemd-repart polkitd
Recommended packages:
apt | apt-utils debconf-i18n libidn2-0 selinux-utils libacl1 libapparmor1
libaudit1 libbpf1 libcrypt1 libkmod2 libpam0g libseccomp2
default-dbus-system-bus | dbus-system-bus linux-sysctl-defaults login mount
systemd-timesyncd | time-daemon systemd-tpm systemd-cryptsetup libgcrypt20
The following NEW packages will be installed:
cryptsetup cryptsetup-bin debconf dmsetup gcc-16-base libblkid1
libc-gconv-modules-extra libc6 libcryptsetup12 libdevmapper1.02.1 libgcc-s1
libjson-c5 libmount1 libpcre2-8-0 libpopt0 libselinux1 libssl3t64
libsystemd-shared libsystemd0 libudev1 libuuid1 libzstd1
openssl-provider-legacy systemd zlib1g
0 upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/15.0 MB of archives.
After this operation, 53.5 MB of additional disk space will be used.
Download complete and in download only mode
Reading package lists...
Building dependency tree...
Reading state information...
Solving dependencies...
The following additional packages will be installed:
3cpio busybox coreutils cryptsetup cryptsetup-bin debconf dmsetup
dracut-install gcc-16-base initramfs-tools initramfs-tools-bin
initramfs-tools-core klibc-utils kmod libacl1 libattr1 libblkid1
libc-gconv-modules-extra libc6 libcryptsetup12 libdevmapper1.02.1 libgcc-s1
libgmp10 libjson-c5 libklibc libkmod2 libmount1 libpcre2-8-0 libpopt0
libselinux1 libssl3t64 libsystemd-shared libsystemd0 libudev1 libuuid1
libzstd1 linux-base logsave openssl-provider-legacy systemd udev zlib1g
Suggested packages:
bzip2 lz4 lzop xz-utils dosfstools keyutils liblocale-gettext-perl
debconf-doc debconf-kde-helper debconf-utils libgtk3-perl libnet-ldap-perl
libterm-readline-gnu-perl perl whiptail | dialog bash-completion glibc-doc
libc-l10n locales libnss-nis libarchive13t64 libbz2-1.0 libcurl4t64
libdw1t64 libelf1t64 libfdisk1 libfido2-1 libgcrypt20 libidn2-0 liblz4-1
liblzma5 libmicrohttpd12t64 libp11-kit0 libpwquality1 libqrencode4
libtss2-esys-3.0.2-0t64 libtss2-mu-4.0.1-0t64 libtss2-rc0t64
libtss2-tcti-device0t64 uuid-runtime systemd-container systemd-homed
systemd-imds systemd-userdbd systemd-boot systemd-report systemd-resolved
systemd-repart polkitd
Recommended packages:
zstd console-setup kbd apt | apt-utils debconf-i18n libidn2-0 selinux-utils
libapparmor1 libaudit1 libbpf1 libcrypt1 libpam0g libseccomp2
default-dbus-system-bus | dbus-system-bus linux-sysctl-defaults login mount
systemd-timesyncd | time-daemon systemd-tpm systemd-cryptsetup libgcrypt20
libtss2-esys-3.0.2-0t64 libtss2-mu-4.0.1-0t64 libtss2-rc0t64
libtss2-tcti-device0t64
The following NEW packages will be installed:
3cpio busybox coreutils cryptsetup cryptsetup-bin cryptsetup-initramfs
debconf dmsetup dracut-install gcc-16-base initramfs-tools
initramfs-tools-bin initramfs-tools-core klibc-utils kmod libacl1 libattr1
libblkid1 libc-gconv-modules-extra libc6 libcryptsetup12 libdevmapper1.02.1
libgcc-s1 libgmp10 libjson-c5 libklibc libkmod2 libmount1 libpcre2-8-0
libpopt0 libselinux1 libssl3t64 libsystemd-shared libsystemd0 libudev1
libuuid1 libzstd1 linux-base logsave openssl-provider-legacy systemd udev
zlib1g
0 upgraded, 43 newly installed, 0 to remove and 0 not upgraded.
Need to get 3411 kB/21.5 MB of archives.
After this operation, 87.1 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian sid/main amd64 libattr1 amd64 1:2.6.0-1 [24.7 kB]
Get:2 http://deb.debian.org/debian sid/main amd64 coreutils amd64 9.10-1 [3142 kB]
Get:3 http://deb.debian.org/debian sid/main amd64 initramfs-tools-bin amd64 0.151 [13.1 kB]
Get:4 http://deb.debian.org/debian sid/main amd64 libklibc amd64 2.0.14-1+b2 [42.2 kB]
Get:5 http://deb.debian.org/debian sid/main amd64 klibc-utils amd64 2.0.14-1+b2 [94.6 kB]
Get:6 http://deb.debian.org/debian sid/main amd64 initramfs-tools-core all 0.151 [47.8 kB]
Get:7 http://deb.debian.org/debian sid/main amd64 initramfs-tools all 0.151 [14.2 kB]
Get:8 http://deb.debian.org/debian sid/main amd64 cryptsetup-initramfs all 2:2.8.7-1 [31.6 kB]
Fetched 3411 kB in 0s (86.2 MB/s)
Download complete and in download only mode
Reading package lists...
Building dependency tree...
Reading state information...
Solving dependencies...
The following additional packages will be installed:
gcc-16-base libc-gconv-modules-extra libc6 libgcc-s1 libkeyutils1
Suggested packages:
glibc-doc debconf | debconf-2.0 libc-l10n locales libnss-nis
Recommended packages:
libidn2-0
The following NEW packages will be installed:
gcc-16-base keyutils libc-gconv-modules-extra libc6 libgcc-s1 libkeyutils1
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 56.0 kB/3063 kB of archives.
After this operation, 14.2 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian sid/main amd64 keyutils amd64 1.6.3-6+b2 [56.0 kB]
Fetched 56.0 kB in 0s (0 B/s)
Download complete and in download only mode
Reading package lists...
Building dependency tree...
Reading state information...
Solving dependencies...
The following additional packages will be installed:
dmsetup gcc-16-base gettext-base grub2-common libbrotli1 libbz2-1.0
libc-gconv-modules-extra libc6 libdevmapper1.02.1 libefiboot1t64
libefivar1t64 libfreetype6 libfuse3-4 libgcc-s1 liblzma5 libpcre2-8-0
libpng16-16t64 libselinux1 libudev1 zlib1g
Suggested packages:
multiboot-doc grub-emu mtools xorriso desktop-base console-setup glibc-doc
debconf | debconf-2.0 libc-l10n locales libnss-nis fuse3
Recommended packages:
shim-signed os-prober libidn2-0 selinux-utils
The following NEW packages will be installed:
dmsetup gcc-16-base gettext-base grub-efi-amd64-signed grub2-common
libbrotli1 libbz2-1.0 libc-gconv-modules-extra libc6 libdevmapper1.02.1
libefiboot1t64 libefivar1t64 libfreetype6 libfuse3-4 libgcc-s1 liblzma5
libpcre2-8-0 libpng16-16t64 libselinux1 libudev1 zlib1g
0 upgraded, 21 newly installed, 0 to remove and 0 not upgraded.
Need to get 1413 kB/10.8 MB of archives.
After this operation, 54.1 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian sid/main amd64 grub-efi-amd64-signed amd64 1+2.14+3 [1413 kB]
Fetched 1413 kB in 0s (78.9 MB/s)
Download complete and in download only mode
Reading package lists...
Building dependency tree...
Reading state information...
Solving dependencies...
The following additional packages will be installed:
dmsetup gcc-16-base gettext-base grub2-common libbrotli1 libbz2-1.0
libc-gconv-modules-extra libc6 libdevmapper1.02.1 libefiboot1t64
libefivar1t64 libfreetype6 libfuse3-4 libgcc-s1 liblzma5 libpcre2-8-0
libpng16-16t64 libselinux1 libudev1 zlib1g
Suggested packages:
multiboot-doc grub-emu mtools xorriso desktop-base console-setup glibc-doc
debconf | debconf-2.0 libc-l10n locales libnss-nis fuse3
Recommended packages:
os-prober libidn2-0 selinux-utils
The following NEW packages will be installed:
dmsetup gcc-16-base gettext-base grub-efi-amd64-unsigned grub2-common
libbrotli1 libbz2-1.0 libc-gconv-modules-extra libc6 libdevmapper1.02.1
libefiboot1t64 libefivar1t64 libfreetype6 libfuse3-4 libgcc-s1 liblzma5
libpcre2-8-0 libpng16-16t64 libselinux1 libudev1 zlib1g
0 upgraded, 21 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/10.8 MB of archives.
After this operation, 54.1 MB of additional disk space will be used.
Download complete and in download only mode
Reading package lists...
Building dependency tree...
Reading state information...
Solving dependencies...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
console-setup : PreDepends: debconf but it is not going to be installed or
debconf-2.0
Depends: console-setup-linux but it is not going to be installed or
hurd but it is not installable
Depends: xkb-data (>= 0.9) but it is not going to be installed
Depends: keyboard-configuration (= 1.248) but it is not going to be installed
Depends: debconf (>= 0.5) but it is not going to be installed or
debconf-2.0
E: Unable to satisfy dependencies. Reached two conflicting assignments:
1. keyboard-configuration:amd64 is selected for install because:
1. console-setup:amd64=1.248 is selected for install
2. console-setup:amd64 Depends keyboard-configuration (= 1.248)
2. keyboard-configuration:amd64 Depends xkb-data (< 2.47A)
but none of the choices are installable:
[no choices]
P: Begin unmounting filesystems...
E: An unexpected failure occurred, exiting...
P: Saving caches...
###########################################################################################
Wed Aug 5 15:25:35 UTC 2026 - Warning: lb build failed with 100. The latest snapshot might not be complete (yet). Try re-running the script with SNAPSHOT_TIMESTAMP=20260805T080632Z.
###########################################################################################
Wed Aug 5 15:25:35 UTC 2026 - Generating summary.txt
###########################################################################################
Wed Aug 5 15:25:35 UTC 2026 - Cleanup
###########################################################################################
Wed Aug 5 15:25:35 UTC 2026 - Publishing results:
###########################################################################################
Wed Aug 5 15:25:35 UTC 2026 - Error: Something went wrong.
====================================================================================
Wed Aug 5 15:25:37 UTC 2026 - running /srv/jenkins/bin/reproducible_debian_live_sync_result.sh (for job publish) on jenkins, called using "" as arguments.
Wed Aug 5 15:25:37 UTC 2026 - actually running "reproducible_debian_live_sync_result.sh" (md5sum 44b4a3c6950234eec074617cd836d0b5) as "/tmp/jenkins-script-SdVZYJIm"
$ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING
Wed Aug 5 15:25:37 UTC 2026 - Starting to sync Environment to 'lxqt-sid-env.txt'.
jenkins_node_wrapper.sh[245608] Command 'rsync --server --sender -te.LsfxCIvu . /srv/workspace/live-build/lxqt-sid.nnD6FTmp/environment.txt' not found in allowed commands.
rsync: connection unexpectedly closed (0 bytes received so far) [Receiver]
rsync error: error in rsync protocol data stream (code 12) at io.c(232) [Receiver=3.4.1]
Wed Aug 5 15:25:39 UTC 2026 - reproducible_debian_live_sync_result.sh stopped running as /tmp/jenkins-script-SdVZYJIm, removing.
Wed Aug 5 15:25:39 UTC 2026 - reproducible_debian_live_build.sh stopped running as /tmp/jenkins-script-nO9x3nau, removing.
SSH EXIT CODE: 12
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list