[sane-devel] Cant get acer 640UT usb to work

[Matts Kivik]

Thanks for your reply.

With sane1.0.5 scanimage works,
but xscanimage and xsane (0.79) still reports no scanner found. I have'nt done anything else than compiling and installing xsane or xscanimage (should I ?) I have tried without being root too as xsane wanted.

console output from xscanimage and scanimage below:

[root at localhost /root]# /usr/local/bin/xscanimage
[xscanimage] No scanners were identified. If you were expecting something
          different, check that the scanner is plugged in, turned on and
          detected by the find-scanner tool (if appropriate). Please read
          the documentation which came with this software (README, FAQ,
          manpages).

[root at localhost /root]# export SANE_DEBUG_SNAPSCAN=255
[root at localhost /root]# /usr/local/bin/scanimage -L
[sanei_debug] Setting debug level of snapscan to 255.
[snapscan] sane_snapscan_init
[snapscan] add_device(/dev/usbscanner)
[snapscan] add_device: Detected (kind of) an USB device
[snapscan] usb_open(/dev/usbscanner)
[snapscan] mini_inquiry
[snapscan] snapscan_cmd
[snapscan] snapscani_usb_cmd(4,0xbfffe220,6,0xbfffe1f0,0xbfffe1ec (36))
[snapscan] atomic_usb_cmd(4,0xbfffe220,6,0xbfffe1f0,0xbfffe1ec (36))
[snapscan] usb_cmd(4,0xbfffe220,6,0xbfffe1f0,0xbfffe1ec (36))
[snapscan] usb_cmd: cmdlen=6, datalen=0
[snapscan] usb_write: writing:  0x12 0x00 0x00 0x00 0x24 0x00
[snapscan] usb_read: reading:  0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] usb_read: reading:  0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x43 0x6f ...
[snapscan] usb_read: reading:  0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] add_device: Is vendor "Color" model "FlatbedScanner16" a supported scanner?
[snapscan] usb_close(4)
[snapscan] sane_snapscan_get_devices (0xbffff3b8, 0)
device `snapscan:/dev/usbscanner' is a Color FlatbedScanner16 flatbed scanner
[snapscan] sane_snapscan_exit




> wrote:
>Hi,
>
>> [snapscan] add_device(/dev/usbscanner)
>> [snapscan] mini_inquiry
>> [snapscan] mini_inquiry: sanei_scsi_cmd command failed: Error during device
>> I/O [snapscan] add_device: mini_inquiry failed with Error during device
>> I/O. [snapscan] sane_snapscan_get_devices (0xbffff380, 0)
>
>
>I didn't realize you were using sane-1.0.4. For USB support you should either 
>upgrade to sane-1.0.5 (recommended) or use an updated snapscan backend from 
>http://snapscan.sourceforge.net 
>
>Regards,
>
>Oliver
>_______________________________________________
>Sane-devel mailing list
>Sane-devel at www.mostang.com
>http://www.mostang.com/mailman/listinfo/sane-devel

_____________________________________________________________
Want a new web-based email account ? ---> http://www.firstlinux.net