[sane-devel] Fwd: small problem

[jim.george at edify.com]

David,

	I have been experiencing similar problems with my mustek 1200cp.

	The only way I can get it to return to home is run scanimage --test,
this always works.

	BTW Mine seems to work best with Xsane as opposed to scanimage, for
some reason scanimage causes it to crash/hang or do other weird things but I
never get problems with xsane for Linux or windows.

Jim

-----Original Message-----
From: David McGlone [mailto:dmcglone at ameritech.net]
Sent: 24 December 2001 19:14
To: sane-devel
Subject: [sane-devel] Fwd: small problem




----------  Forwarded Message  ----------

Subject: small problem
Date: Mon, 24 Dec 2001 11:16:35 -0500
From: David McGlone <dmcglone at ameritech.net>
To: plustek <plustek at linuxhacker.org>

Ok, scanner is working great, only a very small problem persist and I think
it is minor.

Only problem I am having now is Xsane scans and seems to be working good,
but
it only scans about 1/2 of an 8x11 then returns and I get an error:

Error during read:
Error durring device I/0

any suggestions?

here is a copy of my /etc/modules.conf

alias char-major-40 pt_drv
pre-install pt_drv modprobe -k parport
options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=1 mov=4 slowIO=0
forceMode=1

also, the scanner gets stuck when trying to return to home and make an
aweful 
noise, yes, I unpluged it, but how do I get it to return back to the home 
position without having to boot into windows and using my scanner software
to 
scan a page?

Thanks
David M.
AIM: dmcglone27

---------------------------------------------------------------------
To unsubscribe, e-mail: plustek-unsubscribe at linuxhacker.org
For additional commands, e-mail: plustek-help at linuxhacker.org

-------------------------------------------------------
_______________________________________________
Sane-devel mailing list
Sane-devel at www.mostang.com
http://www.mostang.com/mailman/listinfo/sane-devel