[sane-devel] sane-find-scanners - scanning for USB gives error messages

[Christoph Kukulies]

RH 7.1, sane-1.0.6:   

Scanner is a Mustek 1200 USB Plus

# sane-find-scanner >l
[sanei_debug] Setting debug level of sanei_usb to 1.
[sanei_usb] sanei_usb_open: open failed: No such file or directory
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_debug] Setting debug level of sanei_usb to 1.
[sanei_usb] sanei_usb_open: open failed: No such file or directory
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
[sanei_usb] sanei_usb_open: open failed: No such device
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus and some scanners that are connected to the Universal
# Serial Bus (USB) depending on your OS. It will even find scanners
# that are not supported at all by SANE. It won't find a scanner that
# is connected to a parallel or proprietary port.

# If your scanner uses SCSI, you must have a driver for your SCSI
# adapter and support for SCSI Generic (sg) in your Operating System
# in order for the scanner to be used with SANE. If your scanner is


This is stdout and stderr (stderr is the debug printout)

Any clues?

-- 
Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de