[sane-devel] HP 7400c

[mates at sirrah.troja.mff.cuni.cz]

							Ondrejov, 6.11.2001
Hi all

I would like to ask, whether there is any progress with the hp7400c (with
Avision chipset) to be supported by sane. 

The last trace I found is an email from Luc Lalonde, who describes that he's
able to see the scanner in scsi listing (like me) like this:

[root at samson ~]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: YAMAHA   Model: CRW8824E         Rev: 1.00
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
  Vendor: MITSUMI  Model: CD-ROM FX120T !B Rev: b03
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: hp       Model: scanjet 7400c    Rev: 0.8A
  Type:   Scanner                          ANSI SCSI revision: 02

using the hpusbscsi module. I'm also able to see the scanner with scanimage -L
(independently found the HP/hp problem described by Luc) 

[root at samson ~]# scanimage -L
device `avision:/dev/scsi/host1/bus0/target0/lun0/generic' is a hp
scanjet 7400c    flatbed scanner


The scanner just freezes at start_scan when I run scanimage.

Thank you.

mates

--
Martin Jelínek <mates at amu.cz>, http://sirrah.troja.mff.cuni.cz/~mates/
    Astronomical Institute of the Czech Academy of Sciences, Ondrejov