[sane-devel] Mustek 1200 USB Plus - RH Linux 7.1

[Oliver.Neukum at lrz.uni-muenchen.de]

On Tue, 6 Nov 2001, Henning Meier-Geinitz wrote:

> Hi,
>
> On Tue, Nov 06, 2001 at 01:09:03PM +0100, Christoph Kukulies wrote:
> > T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> > D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > P:  Vendor=055f ProdID=0007 Rev= 1.00
> > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 64mA
> > I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbscanner
> > E:  Ad=01(O) Atr=02(Bulk) MxPS=   2 Ivl=  0ms
> > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
> > E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=  1ms
> >
> > The latter worked the first time after I did a
> > modprobe scanner vendor=0x055f product=0x0007
>
> Looks ok. So it's at least detected by the Linux kernel scanner module.

Which is pretty much meaningless. Given ids manually that module will
accept almost anything with 2 bulk endpoints and optionally an interrupt
endpoint. It would eg. happily go for a harddrive.

	Regards
		Oliver Neukum