[sane-devel] HP4c & Buslogic BT-958

[Ray Curtis]

Anyone on this list using this combination with the 2.4 kernel ? I am
still playing around trying to find out why sane can't seem to find my
scanner.
I have added the lines to hp.conf:
/dev/scanner
  option connect-scsi
  option disable-scsi-request

However it still refuses to find it with:

[root at bugs:/etc]/% scanimage  
[sanei_debug] Setting debug level of hp to 255. 
[hp] sane_init called 
[hp] sane_init will finish with Success 
[hp] sane_get_devices called 
[hp] hp_read_config: hp backend v0.94 starts reading config file 
[hp] hp_read_config: processing line </dev/scanner> 
[hp] hp_read_config: processing line <option connect-scsi> 
[hp] hp_read_config: processing line <option disable-scsi-request> 
[hp] hp_read_config: attach /dev/scanner 
[hp] hp_get_dev: New device /dev/scanner, connect-scsi, scsi-request=0 
[hp] sanei_hp_device_new: /dev/scanner 
[hp] scsi_inquire: sending INQUIRE 
[hp] scsi_new: sending TEST_UNIT_READY 
[hp] scsi_flush: writing 2 bytes: 
[hp]  0x0000  1B 45                                            .E 
[hp] scsi_flush: writing 7 bytes: 
[hp]  0x0000  1B 2A 73 32 35 37 45                             .*s257E 
[hp] scl_inq: read failed (Error during device I/O) 
[hp] scl_errcheck: Can't read SCL error stack: Error during device I/O 
[hp] sanei_hp_device_new: SCL reset failed 
[hp] scsi_close: closing fd 4 
[hp] sane_get_devices will finish with Success 
scanimage: no SANE devices found 
[hp] sane_exit called 
[hp] sane_exit will finish 

This combo used to work just fine with the 2.2 kernel and still works
under windows, but the I need it to work under linux if possible.

I am using a later kernel, just to see it that would help, 

Linux bugs 2.4.13-0.5 #1 Sat Nov 3 15:08:02 EST 2001 i686 unknown 

But no luck,

Thanks for anymore suggestions,


-- 
Ray Curtis         Curtis Consulting         http://www.ccux.com