[sane-devel] Failed to open device 'hp:/dev/scanner': Error
Fri, 12 Oct 2001 09:24:02 +0200
to see if the hp-backend can open the device you can run (x)scanimage
The logs should show at which place the communication failed.
Jochen Streicher wrote:
> Abel Deuring wrote:
> > could you send the output from running [x]scanimage or xsane with the
> > evnironment variable SANEI_DEBUG_SANEI_SCSI=128 ?
> "[xscanimage] No scanners were identified. If you were expecting something
> different, check that the scanner is plugged in, turned on and
> detected by the find-scanner tool (if appropriate). Please read
> the documentation which came with this software (README, FAQ,
> Not much...
> /usr/local/sane-find-sanner says:
> sane-find-scanner: found processor "HP C2500A 3332" at device /dev/scanner
> sane-find-scanner: found processor "HP C2500A 3332" at device /dev/sg2
> > Another question: Which SCSI adapter do you use
> Buslogic KT-950 ( = Mylex Flashpoint LW )
> Sane-devel mailing list
(alternate e-mail: firstname.lastname@example.org)