[sane-devel] Plustek scanner

[Ryan Braby]

Hi,

If you are running gimp as a normal user, you need to make sure that
the permissions on the device file allow normal users to read and
write to it.  If "scanimage -L" works are root, but not as a normal
user, that's may be your problem.

I'm using a usb scanner under 2.4.9 and use the following device file:
crw-rw-rw-    1 root     root     180,  48 Aug 31 20:56 /dev/usb/scanner0

Thanks,
Ryan

On Wed, 19 Sep 2001, Keith Bates wrote:

> Hi,
>
> I've just joined the list and just starting with SANE. Please bear with
> me if I'm being stupid :-)
>
> I've got a Plustek OpticPro 4831P scanner which plugs in via the printer
> port. This scanner is on the list of supported scanners. I've installed
> the latest version of SANE, but when I try to run it via the GIMP it
> tells me no scanner was found.
>
> I've gone through the configure-make-make install routine for both
> sane-backend and xsane.
>
> If someone can tell me what I'm doing wrong I would be one happy camper!
>
> --
> God bless you,
>
>
> Keith Bates
> 4 Mooloobar St
> Narrabri NSW 2390
>
> Phone: 02 67924890
> Fax: 02 67925418
>
> www.worship.to/newlife
>
> If you don't have a reason to live
>
> JESUS IS THE ANSWER!
>
> Ask him into your life today...
> He really does make a difference.
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>