[sane-devel] HP Scanjet C6270A on Redhat 6.2

[Peter Kirchgessner]

Hi,

mailtoarvind wrote:

> Hi,
>      The problem is my scanner is connected to USB port on my toshiba laptop. 

> My operating system(Redhat 6.2 kernel 2.2.14) is not recognizing the scanner(HP C6270 A)

> and i know that some module is not loaded which makes kernel to recognize the device but i do not

> know which module to load and where i can find it.


sorry, I forgot that 2.2.x-kernels are not very good with USB. I would 
not recommend to try a kernel less than 2.4.0 with USB.


> Also tell me what is does scsi comes into picture in my case as scanner is connected to USB port.


The hints on the page about SCSI won't help you. But the hints about USB 
could be interesting for you. Also the link to the home of the USB 
scanner driver.

Sincerely

Peter


> Regards
> Arvind
> 
> "Peter Kirchgessner"<peter at kirchgessner.net> wrote:
> Hi Arvind,
> 
> you can have a look at http://www.kirchgessner.net/sanehpfaq.html for 
> some hints.
> 
> Sincerely
> 
> Peter
> 
> mailtoarvind wrote:
> 
> 
>>Hi,
>>    I am trying to make the sane driver woork for my HP C6270 A Scanner which is connected to my laptop via a USB Port. When i have installed the sane driver and run sane-find-scanner it says no scanner found. I understand that i need to install a module for it to work but i could not find it anywhere could you help me with this regard. My kernal version is 2.2.14 Redhat 6.2
>>Regards 
>>Arvind
>>
>>
>>
>>_______________________________________________
>>Sane-devel mailing list
>>Sane-devel at www.mostang.com
>>http://www.mostang.com/mailman/listinfo/sane-devel
>>
>>
>>
> 
> 


-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net