[sane-devel] Current TODO list

Henning Meier-Geinitz henning at meier-geinitz.de
Thu Aug 29 21:42:07 BST 2002


Hi,

This is the current TODO list from the SANE CVS. Please contact me (or
fix it yourself) if an entry is no longer valid. Additions are also
appreciated.

Bye,
  Henning
  
TODO (2002-08-29)

******** todo ********

backends
--------
  * Add new backends (+ means: scheduled for version 1.0.9)
    - hp4200 http://hp4200-backend.sourceforge.net/
    + Relisys Scorpio Super 3 - VM3575 (wip)
      http://fz.eryx.net/sane/#teco2
    - Genius Vivid Pro USB, Colorado USB 19200, Visioneer OneTouch 7600 
      IBM IdeaScan 2000 USB 
      http://homepages.paradise.net.nz/stevenel/scanner/
    - Hewlett-Packard ScanJet 3300C / 3400C and 4300C (wip)
      http://sourceforge.net/projects/hp3300backend
    
  * All backends should check for TL_X < BR_X and TL_Y < BR_Y to
    avoid segfaults or even scanner damage. This should NOT be done
    in sane_control_option, it should be possible to temporary set
    TL_X > BR_X or TL_ > BR, otherwise it is hard for a frontend to
    set the correct values.

  * qcam:
     - implement auto mode for brightness and black-level (don't
       just advertise it!) Actually, implement an auto "backend" instead
       that can be plugged in front of any backend with brightness/contrast
       etc controls
     - figure out how/if to support bulb mode
     - convert to use sanei_pio functions instead of direct port
       access.
     - The result of locking isn't checked --> does it make sense at all?

  * dll: 
     - Rewrite to use libtool ltdl library. Is this necessary? It seems to
       work...

  * dc210, dc240, gphoto2, and jpeg stuff: move sanei_* functions to sanei/
    (if they are necessary). That's probably for SANE2. 

  * v4l:
     - Problems (crash) with more than one video card. It looks like 
       the two different cards are identified as the same card.
     - Geometry support is missing
     - Frequency setting is missing

  * Fix backends where sane_exit() does not release memory allocated by
    sane_get_devices().
      - abaton
      - agfafocus
      - apple
      - as6e
      - bh
      - canon
      - coolscan
      - dmc
      - qcam
      - ricoh
      - s9036
      - sp15c
      - tamarack
      
      - etc?

  * as6e: attach: memory (dev + dev-sane.name) isn't freed if driver isn't
    found.

  * net: add IPv6 support.

  * Fix warnings about DBG calls (try gcc 3.x to get these warnings):
    - umax1220u
 
  * bh: Suspicious loop ("../../backend/bh.c", line 1923: warning:
    end-of-loop code not reached), see sane-devel.

  * coolscan: Lots of compilation warnings (e.g.
    "../../backend/coolscan-scsidef.h", line 160: warning: initialization
    type mismatch; empty declarations), see sane-devel.

  * Check the return value of wait() and waitpid(). This is important, if
    the status value is checked for e.g. WIFEXITED after the call of wait()
    or waitpid(). Both functions may fail if the frontend already did a wait
    for the children. 

  * remove ptal support from configure and hp backend

doc
---
  * Add doxygen documentation for the remaining sanei files:
    - sanei_pio.h
    - sanei_pv8630.h
    - sanei_wire.h

  * sane.tex:
    - Define the return values for sane_init?  Define the consequences if
      sane_init doesn't return SANE_STATUS_GOOD.
    - Add a warning/explanation about problems with sane_get_select_fd, Unix
      select() calls and sane_cancel.
    - Add some text about the meaning of bits in 1-bit modes.
    - Define, how to handle SANE_CAP_ADVANCED for groups.

  * desc files:
    - Make sure, that the manufacturer (and model) names use the same spelling:
      - umax, plustek (Genius, KYE-Genius)
      - plustek, umax_pp, avision, hp, hpsj5s (Hewlett-Packard instead of HP)
    - Check URLs:
      - umax (http://www.heidelberg-cps.com/ , http://support.umax.com/ ,
        http://www.umaxweb.com.tw/ )

    - Mark scanners with ":status :untested" if they are untested by the author
      or users:
      - canon630u (add 636 as :untested (from manpage)?)

    - Remove unsupported scanners from the list or at least mark them with
      ":status :unsupported":
      - mustek_pp

  * scanimage: 
      - Add doku for --icc-profile
      - Add link to gamma4scanimage

frontends
---------
  * saned:
     - saned times out after 60 minutes. Check if the
       watchdog timer is really necessary (e.g. to avoid blocking scanners
       by one user). Maybe add a command line option to saned to set the
       timeout. Otherwise turn on TCP keep alive (where available) and
       (maybe) check the connection from server side.
     - Add IPv6 support.
     - Add support for IP ranges in saned.conf (like 10.0.0.0/8)?

  * scanimage: Check range of width and height. scanimage just uses the ranges
    from br-x and br-y but this is wrong for tl-x and tl-y != 0 and for
    SANE_UNIT_PIXEL.

  * scanimage: add option to avoid scanning (for setting options only)

sanei
-----
  * sanei_scsi: Think about a completely new interface. Details are in
    http://www.mostang.com/pipermail/sane-devel/2002-January/001995.html .

  * create sanei_parport_* and remove all inb, outb,... from all backends;
    use libieee1284 if available (see
    http://people.redhat.com/twaugh/libieee1284/). Or just include this
    library into sane.

  * Check if the device file has the right type before accessing it. E.g.
    check for major/minor numbers to avoid accessing a USB file as SCSI 
    device. This is finished for sanei_scsi.c/Linux and sane-find-scanner.
    Patches for other platforms are welcome.

  * sanei_scsi (Linux): Make sure that the SCSI driver is loaded when
    checking for scanners. Ideas: Open/close all the /dev/sg* files in
    sanei_scsi.c, dll.c or in a new backend.

platform-specific
-----------------
  * SCSI access doesn't seem to work on Linux/Sparc. See emails from
    Tomislav Renic on sane-devel (2001-09-21).

  * Really fix all the parport/inb/outb compilation issues which break
    porting to some non-i386 platforms.

  * Add AC_OBJEXT and AC_EXEEXT to configure.in for automatically adding
    the correct extensions (e.g. for OS/2). Also update the Makefiles
    accordingly.

  * Add support for semaphores also for OS/2 (currently used in snapscan).

  * Add support for Mac OS X in sanei_scsi.c.

  * Find out why USB on *BSD only works once (at least for Mustek scanners
    and OHCI).

misc
----
  * sane-config: add options "--exec-prefix=...." and "--prefix=..."
    compareable to gtk-config

  * Make output of sane-find-scanner more flexible. See scanimage -f for
    details.

  * Check licence issues with getopt*.c and md5.c. These files are GPLed, so
    if they are used in backends, their SANE exception will be void.

  * Can we link external libraries only to backends that need them?
    See http://fz.eryx.net/sane/#configure.

  * Fix japi to run on current jdks. Swing is now included, and there is
    a segfault in Sane.c.





More information about the sane-devel mailing list