[sane-devel] about GT6801 CCD scanner
Fan Dan
dan_fancn at hotmail.com
Thu Dec 5 10:52:57 GMT 2002
Hai, henning:
Thanks you
I set base_xdpi of Mustek 2400usb scanner to 1200, then the gray Image
is OK . But when I scan in color Mode , the bytes per line only 1/3 of I
set. In backend I can't understangding some parameters (what is the
difference of bace_xdpi and optical_xdpi? what's mean of ld_shift_r ,
ld_shift_g, ld_shift_b?
There are some parameters in model.
static GT68xx_Model mustek_2400usb_command_model_info={
"mustek-2400usb", /* name */
"Mustek", /* vendor */
"Mustek 2400USB", /* model */
"P9fw.usb", /* firmware file name */
&mustek_gt6801_command_descriptor, /* Model info */
600, /* optical_xdpi */
1200, /* optical_ydpi */
1200, /* base_xdpi 600 */
600, /* base_ydpi */
1200, /* ydpi_force_line_mode */
SANE_TRUE, /* use base_ydpi for all resolution */
{600,300,150,75,50,0}, /* xdpi_value */
{1200,600,300,100,50,0}, /* ydpi_value */
{8,0}, /* bpp_gray_values */
{8,0}, /* bpp_color_values */
SANE_FIX(15.0), /* start of scan area in mm */
SANE_FIX(25.0), /* start of scan area in mm */
SANE_FIX(220.0), /* width of scan area in mm */
SANE_FIX(299), /* high of scan area in mm */
SANE_FIX(0.0), /* start of white strip in mm */
SANE_FIX(7.0), /* start of black mark in mm */
SANE_FIX(0.0), /* start of scan area in TA mode in mm */
SANE_FIX(0.0), /* start of scan area in TA mode in mm */
SANE_FIX(100.0), /* width of scan area in TA mode in mm */
SANE_FIX(100.0), /* high of scan area in TA mode in mm */
SANE_FIX(0.0), /* start of white strip in TA mode in mm */
0, /* ld_shift_r */
16, /* ld_shift_g */
32, /* ld_shift_b */
0, /* ld_shift_double */
LampOrder_RGB, /* color_order */
{0x16,0x06,0x16,0x06,0x16,0x06}, /* AFE param 0x13 0x04 0x0f 0x02*/
{0x157,0x157,0x157}, /* exposure time */
SANE_FALSE /* CCD scanner */
0
};
_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn
More information about the sane-devel
mailing list