[sane-devel] installing hp - scanner

[Peter Kirchgessner]

Hi Frank,

Frank Coldewe wrote:

> Hello Peter Kirchengessner,
> 
> i had  a look at the sane documentation an he is supportet.
> 
> Frank
> 


maybe it does not matter. But any hint which model ?

You can also find some basic hints about HP-scanners and USB on 
www.kirchgessner.net/sanehpfaq.html.


<snip>


>>>
>>>/etc/sane/hp.conf looks like:
>>>
>>>/dev/usb/usbscanner0           also probed 1 an 2
>>>    option connect-device
>>>
>>>


There are two places where the hp.conf can reside:

/etc/sane.d/hp.conf and /usr/local/etc/sane.d/hp.conf

And you can try to start xscanimage like

xscanimage hp:/dev/usb/usbscanner0

to force to select a certain device.

--Peter


>>>sane-backends-1.0.6 are installed
>>>
>>>sane-frondends-1.0.6 requests after ./configure:
>>>
>>>GUI`s   activated    (xcam  + xscanimage)
>>>GIMP   deactivated for scannimage         ..... any idea why and how i
>>>can change this
>>>
>>>so why is my scanner still not detected isn`t the driver installed with
>>>sane backends?
>>>
>>>Frank
>>>
>>>_______________________________________________
>>>Sane-devel mailing list
>>>Sane-devel at www.mostang.com
>>>http://www.mostang.com/mailman/listinfo/sane-devel
>>>
>>>
>>>
>>--
>>Peter Kirchgessner
>>http://www.kirchgessner.net
>>mailto:peter at kirchgessner.net
>>
> 
> 


-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net