[sane-devel] Colorpage Vivid 3XE continues

[Juanjo Alvarez]

I've finnaly had an answer to my emails from genius:
...................
Dear customer,
please go to following webpage for LINUX driver. ColorPage-Vivid3XE is
equal to ColorPage-Vivid III+V2.

http://home.t-online.de/home/g-jaeger/plustek.html#others

Mfg
KYE Systems Europe
Website:
www.genius-europe.com
...................

Now I've compiled sane 1.0.7 with the plustek-usb code (0.41), but when I do a
scanimage -d plustek:/dev/usb/scanner0 it seems to hang until I kill it
when a kill -9 printing sometimes on the syslog:

usb_control/bulk_msg: timeout

And the debug messages are.

.....................
nei_debug] Setting debug level of dll to 12.
[dll] sane_init: SANE dll backend version 1.0.5 from sane-backends-1.0.7
[dll] add_backend: adding backend plustek
[dll] load: loading backend plustek
[dll] load: dlopen()ing `/usr/local/lib/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[sanei_debug] Setting debug level of plustek to 12.
[plustek] sane_init: sane-backends 1.0.7
[plustek] sane_init, ># Plustek-SANE Backend configuration file<
[plustek] sane_init, ># For use with Plustek parallel-port scanners and<
[plustek] sane_init, ># LM9831/2 based USB scanners<
[plustek] sane_init, >#<
[plustek] sane_init, ># for multiple devices use<
[plustek] sane_init, ># /dev/pt_drv0<
[plustek] sane_init, ># /dev/pt_drv1<
[plustek] sane_init, ># /dev/pt_drv2<
[plustek] sane_init, >#<
[plustek] sane_init, ># For parport devices enable the parport section<
[plustek] sane_init, ># by uncommenting the lines below<
[plustek] sane_init, >#<
[plustek] sane_init, ># parport<
[plustek] sane_init, ># /dev/pt_drv<
[plustek] sane_init, >#<
[plustek] sane_init, ># The USB section<
[plustek] sane_init, ># each device needs at least two lines:<
[plustek] sane_init, ># - usb vendor-ID and product-ID<
[plustek] sane_init, ># - devicename<
[plustek] sane_init, ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] sane_init, ># usb 0x07B3 0x0017<
[plustek] sane_init, ># /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ># For autodetection<
[plustek] sane_init, ># usb<
[plustek] sane_init, ># /dev/usbscanner<
[plustek] sane_init, >#<
[plustek] sane_init, ><
[plustek] sane_init, >#usb 0x07B3 0x0017<
[plustek] sane_init, >usb 0x0458 0x2017<
[plustek] ignoring >usb 0x0458 0x2017<
[plustek] sane_init, >/dev/usb/scanner0<
[plustek] ignoring >/dev/usb/scanner0<
[dll] init: backend `plustek' is version 1.0.0
[plustek] sane_open - /dev/usb/scanner0
[plustek] attach (/dev/usb/scanner0, 0xbfffdfc0, 0xbfffdfbc)
[plustek] Device configuration:
[plustek] device name  : ><
[plustek] porttype     : 0
[plustek] USB-ID       : ><
[plustek] warmup       : 0s
[plustek] lampOff      : 0
[plustek] lampOffOnEnd : 0
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] ---------------------
[plustek] drvopen()
[plustek] ioctl PT_DRV_OPEN_DEVICE failed(-1)
[plustek] open failed: -1
[plustek] attach (/dev/usb/scanner0, 0xbfffdfc0, 0xbfffdfbc)
[plustek] Device configuration:
[plustek] device name  : ><
[plustek] porttype     : 1
[plustek] USB-ID       : ><
[plustek] warmup       : 0s
[plustek] lampOff      : 0
[plustek] lampOffOnEnd : 0
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usb/scanner0,)
[plustek] Vendor ID=0x0458, Product ID=0x2017
[plustek] usbio_DetectLM983x
........................

What could be the problem? (I'm using kernel 2.2.18-pre7)

Thanks again!