[Fwd: Re: [sane-devel] sane weirdness + UMAX Astra 1220 S]

[paul beard]

-------- Original Message --------
Subject: Re: [sane-devel] sane weirdness + UMAX Astra 1220 S
Date: Thu, 28 Feb 2002 14:48:30 -0800
From: paul <pkdb1 at attbi.com>
To: Hubert Figuiere <hfiguiere at teaser.fr>
CC: sane-devel at mostang.com
References: <1014935689.691.21.camel at dirkpitt>

sounds familiar . . .  if Abel is reading this, perhaps he can
supply you with some diagnostic patches in hopes of working out
how this wacky Apple hardware works.

Did you run this by any of the linux PPC lists or newsgroups?

Hubert Figuiere wrote:

 > Hi
 >
 > I'm still having problems with Sane.
 >
 > I run Linux PPC on a PowerMac clone. I rebuilt sane 1.0.7 from 
source.
 > I have kernel 2.2.20-pmac (from Debian PPC)
 >
 > I have 2 SCSI buses. One using the built-in SCSI control on 
which you
 > have the scanner. The other is the AHA-2930B that carry the 
boot disk. I
 > have several SCSI devices.
 >
 > sane-find-scanner detects the scanner in /dev/sg5
 > But that's all. I did that:
 >
 >
 >         export SANE_DEBUG_DLL=255
 >         export SANE_DEBUG_SANEI_SCSI=255
 >         export SANE_DEBUG_UMAX=255
 >         scanimage -L 2> logfile
 >
 > I attach the log.
 >
 > sane-find-scanner no longer find it. I have powered off/on the 
scanner,
 > no change.
 >
 >
 > Any clue appreciated.
 >
 > Note: cdrecord works fine.
 >
 > Hub
 >