[sane-devel] scanjet HP5300C

[Rene Rebe]

Hi.

The answers are in the text below:

On: Tue, 16 Jul 2002 11:17:40 +0200,
    "COLLINEAU Franck FTRD/DMI/TAM" <franck.collineau at rd.francetelecom.com> wrote:
> Hi 
> thank for your answer.
> 
> Here are results of different commands:
> lsmod:
> Module                  Size  Used by    Not tainted
> isofs                  25792   0  (autoclean)
> inflate_fs             19328   0  (autoclean) [isofs]
> sb                      7744   0 
> sb_lib                 33888   0  [sb]
> uart401                 6336   0  [sb_lib]
> sound                  57292   0  [sb_lib uart401]
> soundcore               4068   5  [sb_lib sound]
> af_packet              12488   0  (autoclean)
> ip_vs                  65400   0  (autoclean)
> usb-uhci               21668   0  (unused)
> usbcore                59072   1  [usb-uhci]
> 3c59x                  25928   0  (autoclean) (unused)
> supermount             62180   2  (autoclean)
> ext3                   61856   1  (autoclean)
> jbd                    39512   1  (autoclean) [ext3]
> rtc                     5880   0  (autoclean)
> reiserfs              169312   4 

So hpusbscsi is not loaded. Please execute "modprobe hpusbscsi"

> dmesg | grep -i usb:
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 09:46:29 Jul 16 2002
> usb-uhci.c: High bandwidth mode enabled
> usb-uhci.c: USB UHCI at I/O 0xfca0, IRQ 9
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver

Hm? Are you sure your scanner is connected? The should be a "connected
device bla bla" message ...

> cat /proc/bus/usb/devices:
> 
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> S:  Product=USB UHCI Root Hub
> S:  SerialNumber=fca0
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms

Hm? Only a Root Hub? There should be an HP device ...

Please connect your scanner ;-)

> I don't know how install patch there is no installation guide.

Hm. What do you mean here? I can write some details how to patch (the
source-code - not the windows-binary patches), and recompile SANE with
my latest backend.

> Thank you again for your help
> 
> Franck

k33p h4ck1n6 -- René

--  
René Rebe (Registered Linux user: #248718 <http://counter.li.org>)
e-mail:   rene.rebe at gmx.net, rene at rocklinux.org
web:      www.rocklinux.org, drocklinux.dyndns.org/rene/

Anyone sending unwanted advertising e-mail to this address will be
charged $25 for network traffic and computing time. By extracting my
address from this message or its header, you agree to these terms.