[sane-devel] RedHat 7.3 + scanimage (no scanners identified)

[snowkrash@altavista.nl]

I've done a fresh RH 7.3 install last weekend.

My USB HP Scanjet 5370 scanner (Avision unit) was found during ... so I thought I could use it immediately.

Not.

sane-find-scanner finds three (!) scanners, all the same HP scanjet 5370C's but on different devices:

sane-find-scanner: found SCSI scanner "HP ScanJet 5370C 6.00" at device /dev/scanner
sane-find-scanner: found SCSI scanner "HP ScanJet 5370C 6.00" at device /dev/sg0
sane-find-scanner: found SCSI scanner "HP ScanJet 5370C 6.00" at device /dev/sga


What's that supposed to mean ... and is this allright?

scanimage -L says it doesn't identify any scanners.

My /proc/bus/usb/devices says:
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=9800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 17/900 us ( 2%), #Int=  1, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=9400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=1004 Rev= 1.00
S:  Manufacturer=Hewlett-Packard
S:  Product=DeskJet 970C
S:  SerialNumber=MY03V1506MJQ
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
I:  If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=0701 Rev= 0.01
S:  SerialNumber=0000000000000000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hpusbscsi
E:  Ad=01(O) Atr=02(Bulk) MxPS=   8 Ivl=  0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms

/proc/scsi/scsi says:
Attached devices: 
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: HP       Model: ScanJet 5370C    Rev: 6.00
  Type:   Scanner                          ANSI SCSI revision: 02

Anyone??? Give a scream if I didn't give all the neccessary info.

Thnx,
Jordi