[sane-devel] Usage of parallel port scanner

[Jochen Eisinger]

The following is an OpenPGP/MIME signed message
created by Enigmail/Mozilla, following RFC 2440 and RFC 2015
--------------enig1572E1EE0932CC393A1AE65B
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi,

lp0 etc are line printers (therefor lp) and not scanners. Please define
the port as described in the configfile /etc/sane.d/mustek_pp.conf or
the man-page sane-mustek_pp

regards
-- jochen

Joachim Backes wrote:
> Hi,
> 
> I want to use my medion9848 scanner,attached to the parallel port,
> under linux (redhat 7.3). It is a mustek scanner. My problem: When using
> scanimage for example, how to define the scan device? I tried
> -d mustek_pp:/dev/lp0, but this was rejected by:
> 
>         scanimage: open of device mustek_pp:/dev/lp0 failed: Invalid argument
> 
> The parallel port is configured correctly - my printer runs at /dev/lp0
> without problems.
> 
> Any idea?
> 
> Regards
> 
> Joachim Backes
> 
> --
> 
> Joachim Backes <backes@rhrk.uni-kl.de>       | Univ. of Kaiserslautern
> Computer Center, High Performance Computing  | Phone: +49-631-205-2438 
> D-67653 Kaiserslautern, PO Box 3049, Germany | Fax:   +49-631-205-3056 
> ---------------------------------------------+------------------------
> WWW: http://hlrwm.rhrk.uni-kl.de/home/staff/backes.html  
> 
> 
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel

-- 
...and I doubt complaining to the author will get you
anything but a free procmail rule.

--------------enig1572E1EE0932CC393A1AE65B
Content-Type: application/pgp-signature

-----BEGIN PGP MESSAGE-----
Version: GnuPG v1.0.7 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQE9DbHl8OF76YrreuMRAot7AKCnb1WQiwxL6XIOt9VB49hGxgce3QCdFz3u
h3WIDwbrduiYb9V7aVTTX/M=
=uOHY
-----END PGP MESSAGE-----

--------------enig1572E1EE0932CC393A1AE65B--