[sane-devel] Re: Mustek 600 III EP Plus problems

[Jochen Eisinger]

Hi,

to which port is your scanner connected? Or are you using a printer
while trying to scan? You could try to unload the parport modules (or at
least make sure they do not lock the port address...)

regards
-- jochen

[Kristen Doyle]
> I am trying to get it working on an linux box when i try though the
> following comes up
> 
> Linux 2.4.18
> 
> 
> [sanei_debug] Setting debug level of mustek_pp to 128.
> [mustek_pp] init: SANE v1.0.8, backend v1.0.9-devel
> [mustek_pp] I wouldn't let myself be root if I were you...
> [mustek_pp] init: option niceload
> [mustek_pp] init: trying port `0x378'
> [mustek_pp] attach: couldn't attach to `0x378' (Invalid argument)
> [mustek_pp] attach(v1.0.9-devel): line 2538: debug exception
> [mustek_pp] init: couldn't attach to port `0x378'
> [mustek_pp] init: 'name' only allowed after 'port'
> [mustek_pp] init: 'vendor' only allowed after 'port'
> [mustek_pp] init: option wait-lamp 15
> [mustek_pp] init: setting global option wait-lamp to 15
> [mustek_pp] init: option strip-height 16
> [mustek_pp] init: setting global option strip-height to 16
> 
> No scanners were identified. If you were expecting something
> different, check that the scanner is plugged in, turned on and
> detected by the sane-find-scanner tool (if appropriate). Please read
> the documentation which came with this software (README, FAQ,
> manpages).[mustek_pp] exit: (...)
> comp3:/usr/local/etc/sane.d#


-- 
...and I doubt complaining to the author will get you
anything but a free procmail rule.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 185 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20020603/e369cb69/attachment.sig>