[sane-devel] Epson 1650 error in receive - status = 9

[Jeff Johnson]

So....  i think i figured out that the reason for this error is because
i did not have usbdev filesystem turned on in my kernel.  It seems to be
working so far.



On Mon, 2002-06-10 at 12:34, Jeff Johnson wrote:
> greetingss
> 
> I am getting these messages on the console with sane frontends and not
> sure what the problem might be
> 
> scanner is epson 1650 Photo.
> 
> any ideas are appreciated.
> 
> Thanks,
> jeff
> 
> [epson] sane_open(/dev/usb/scanner0)
> [epson] send buf, size = 2
> [epson] buf[0] 1b .
> [epson] buf[1] 40 @
> [epson] error in receive - status = 9
> [epson] receive buf, expected = 1, got = -1
> [epson] send buf, size = 2
> [epson] buf[0] 1b .
> [epson] buf[1] 40 @
> [epson] error in receive - status = 9
> [epson] receive buf, expected = 1, got = -1
> 
> 
> 
> _______________________________________________
> Sane-devel mailing list
> Sane-devel at www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel