[sane-devel] Sand on Solaris 9

[Peter Kirchgessner]

Hi,

some older versions of Solaris required a special option for the 
boot/reboot command. Then on booting it scans the SCSI bus again and 
creates the new devices.
Maybe in that step you also see a message where the scanner is found.

--Peter

Bruce Riddle wrote:

> I'm trying to get Sane going on Solaris 9.  
> I have an HP ScanJet 4p SCSI, and have modified sgen.conf
> and enumerated the device.
> 
> However sane-find-scanner does not seem to search for the device.
> sane-find-scanner: searching for SCSI scanners:
> sane-find-scanner: checking /dev/scg0a... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg0b... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg0c... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg0d... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg0e... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg0f... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg0g... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg1a... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg1b... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg1c... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg1d... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg1e... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg1f... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg1g... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg2a... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg2b... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg2c... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg2d... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg2e... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg2f... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/scg2g... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/0... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/1... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/2... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/3... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/4... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/5... failed to open (Invalid argument)
> sane-find-scanner: checking /dev/sg/6... failed to open (Invalid argument)
> sane-find-scanner: searching for USB scanners:
> sane-find-scanner: done
> 
> should it not look in /dev/scsi as well on Solaris?
> 
> Thanks
> 
> 
> 
> 


-- 
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter at kirchgessner.net