[sane-devel] HP 4C, (C1130A) Sane-1.0.9 OS/2 Assertion failed:
info, file hp-scl.c, line 1317
Peter Kirchgessner
peter@kirchgessner.net
Wed, 06 Nov 2002 07:13:40 +0100
Hi,
can you try to start it as
scanimage -d hp 1>test.pnm 2>errors.255
Sincerely
Peter
Franz Bakan schrieb:
> Hi,
>
> here's a errorlog from a guy trying to use a HP-Scanner with
> current SANE-version:
>
> Scanner is HP 4C
> Adapter is Adaptec 2940U/UW
> Sane-Version is 1.0.9
> Content of hp.conf is:
> ---cut---
> b1t5l0
> ---cut---
>
>
> scanimage -d hp:b1t5l0 1>test.pnm 2>errors.255
> fails on OS/2 with the following errorlog:
>
> [sanei_debug] Setting debug level of hp to 255.
> [hp] sane_init called
> [hp] sane_init will finish with Success
> [hp] sane_open called
> [hp] hp_read_config: hp backend v0.96 starts reading config file
> [hp] hp_read_config: processing line <b1t5l0>
> [hp] hp_read_config: attach b1t5l0
> [hp] hp_get_dev: New device b1t5l0, connect-scsi, scsi-request=1
> [hp] sanei_hp_device_new: b1t5l0
> [sanei_debug] Setting debug level of sanei_scsi to 255.
> ...
> [sanei_scsi] OS/2: adapter#01 '2940U/UW/A/T/D'
> [sanei_scsi] OS/2: id#00 status=82h
> [sanei_scsi] OS/2: id#01 status=82h
> [sanei_scsi] OS/2: id#02 status=01h
> [sanei_scsi] OS/2: type is 'CD-drive'
> [sanei_scsi] OS/2 'PIONEER DVD-ROM DVD-303R2.00 1999/12/16PIONEER '
> [sanei_scsi] OS/2: id#03 status=82h
> [sanei_scsi] OS/2: id#04 status=82h
> [sanei_scsi] OS/2: id#05 status=01h
> [sanei_scsi] OS/2: type is 'processor'
> [sanei_scsi] OS/2 'HP C1130A 3540 1999/12/16PIONEER '
> [sanei_scsi] OS/2: id#06 status=01h
> [sanei_scsi] OS/2: type is 'CD-drive'
> [sanei_scsi] OS/2 'YAMAHA CRW4260 1.0q30/10/98/16PIONEER '
> [sanei_scsi] open_aspi: close temporary file 'asa00309'
> [hp] scsi_inquire: sending INQUIRE
> [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 36
> [hp] scsi_new: sending TEST_UNIT_READY
> [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 0
> [hp] scsi_flush: writing 2 bytes:
> [hp] 0x0000 1B 45 .E
> ...
> [hp] probing ScanJet IIcx
> [hp] scsi_flush: writing 6 bytes:
> [hp] 0x0000 1B 2A 73 31 31 45 .*s11E
> [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 6
> [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 24
> [hp] scsi_read: 24 bytes:
> [hp] 0x0000 1B 2A 73 31 31 64 4E 00 31 39 35 41 18 00 00 00 .*s11dN.195A....
> [hp] 0x0010 43 31 31 33 30 41 20 20 C1130A
> [hp] scl_inq: parameter 11 unsupported
> [hp] probing ScanJet 3c/4c/6100C
> [hp] scsi_flush: writing 6 bytes:
> [hp] 0x0000 1B 2A 73 31 32 45 .*s12E
> [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 6
> [sanei_scsi] sanei_scsi_cmd: Reading srb.u.cmd.data_len= 24
> [hp] scsi_read: 24 bytes:
> [hp] 0x0000 1B 2A 73 31 32 64 4E 00 31 39 35 41 18 00 00 00 .*s12dN.195A....
> [hp] 0x0010 43 31 31 33 30 41 20 20 C1130A
> [hp] scl_inq: parameter 12 unsupported
> [hp] probing ScanJet 3p
> ...
> [hp] probe_scanner: Probing b1t5l0
> [hp] probe_scanner: use cached compatibility flags
> [hp] start: No request to mirror image vertically
> [hp] sanei_hp_optset_scan_type: scantype=0
> [hp] start: No request to mirror image vertically
> [hp] start: 2550 pixels per line, 319 bytes per line, 4199 lines high
> [hp] sanei_hp_scl_startScan: Start scan
> [hp] scsi_flush: writing 5 bytes:
> [hp] 0x0000 1B 2A 66 30 53 .*f0S
> [sanei_scsi] sanei_scsi_cmd: Writing srb.u.cmd.data_len= 5
> [hp] sanei_hp_get_connect: Could not get info for b1t5l0. Assume SCSI
> Assertion failed: info, file hp-scl.c, line 1317
>
> Abnormal program termination
> ...
>
> Any hint what to do?
> Complete errorlog available on request.
>
> Regards,
> Franz
>
>
> _______________________________________________
> Sane-devel mailing list
> Sane-devel@www.mostang.com
> http://www.mostang.com/mailman/listinfo/sane-devel
>
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:peter@kirchgessner.net