[sane-devel] USB Canoscan N670U

[Jaeger, Gerhard]

Hi,

On Friday, 15. November 2002 16:40, Patrice Ouellette wrote:
[SNIP]
> found USB scanner (vendor=0x04a9, product=0x220d) at
> libusb:001:002

--> this will be your device name

>
> AND HERE IS WHAT I GET FROM
> P:  Vendor=04a9 ProdID=220d Rev= 1.00
> S:  Manufacturer=Canon
> S:  Product=CanoScan

That okay for CanoScan 670....

> I AM USING THE FOLLOWING CONF FILE
> plustek.conf with the following settings....
>
> # Plustek-SANE Backend configuration file
> # For use with Plustek parallel-port scanners and
> # LM9831/2/3 based USB scanners
> #
> # For parport devices use the parport section
> #
> #[parport]
> #device /dev/pt_drv
>
> #
> # leave the default values as specified in
> etc/modules.conf
> #
> option warmup    -1
> option lOffOnEnd -1
> option lampOff   -1
>
>
> #
> # The USB section:
> # each device needs at least two lines:
> # - [usb] vendor-ID and product-ID
> # - device devicename
> # i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)
> [usb] 0x04a9 0x220d
> device /dev/usbscanner2

--> here's the problem: use device libusb:001:002

and I recommend the latest backend (0.45-TEST2) from
www.gjaeger.de/scanner/plustek.html

Cheers
  Gerhard